graphics card set - Silicon Integrated Systems

3 respostas [Última entrada]
karma358
Desconectado
Joined: 03/11/2014

I would like configure my graphics card, but i don't know how do it.
I don't know the trademark of my card, only know intel XD
I want trisquel by the freedom Thanks.

looks like my desk : https://mediacru.sh/sgTn4TD94PZb.png
lspci:

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:09.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller
00:09.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller
00:09.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
mauro@mauro-M730SR:~$

karma358
Desconectado
Joined: 03/11/2014

thanks

lembas
Desconectado
Joined: 05/13/2010

What's wrong or what are you trying to do? You can read the manual page for the driver, it's called sis.

man sis
karma358
Desconectado
Joined: 03/11/2014

thanks, the problem was the resolution of monitor,the solution is edit xorg.conf

sudo gedit /etc/X11/xorg.conf

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1440x900"
Horizsync 31.5-64.0
Vertrefresh 56.0 - 65.0
modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
Gamma 1.0
# modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
# modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
# modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection

reboot pc

thanks, i love trisquel