We are looking for SBC with following requirement.
- Inicie sesión ou rexístrese para enviar comentarios
We are looking for SBC with following requirement. Can I have recommendations?
Core Number: ARM® Cortex-A / 1 Ghz
Audio Interface
Headphone: 3.5mm
Speaker: 8Ω 2/1/0.5W
MIC: Optional
Memory
Type: eMMC+DDR2
Capacity: 2GB(ROM)+256MB(RAM)
Data Communication Interface
Memory card: MicroSD MAX:64GB
Bluetooth: BLE
Wi-Fi: 802.11b/g/n
USB: Chargeable USB 2.0
Buttons: Power / Reset 1
Display: LCD 2,8”: 240(RGB)*320 TFT LCD
SW Platform: >= Android OS4.2
Luke Leighton or Chris Waid (lkcl and Chris on this forum) may be able to answer; they have a SoC:
> Luke Leighton or Chris Waid (lkcl and Chris on this forum) may be able
> to answer; they have a SoC:
>
> https://www.crowdsupply.com/eoma68/micro-desktop
+1 i would build your product(?) using eoma68:
http://rhombus-tech.net/
http://elinux.org/Embedded_Open_Modular_Architecture/EOMA-68
takes care of the nightmare of getting your hands on socs, simplifiers
pcb design, free software rights reassurance = you will get all the
source code, etc etc :) theres tons of info in the years of mailing list
posts for the project:
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
personally i’ve followed pretty much every detail of the project for
last 4-5years and added my pledge to the crowd fund.
Thank you for your suggestion, I chose Samsung S5P4418 Embedded Single Board Computer
CPU：S5P4418 ARM Cortex-A9； Frequency：1.4GHz*4 RAM：1GB DDR3/2GB DDR3 Flash：4GB/8GB/16GB emmc
The G4418 single board computer is almost one third of the G4418 development board size, but with better performance than the G4418 development board. It nearly covers all the peripheral function of the development board, as well as onboard VGA, USB WIFI/BT two in one module, etc. Software: G4418 SBC is completely compatible with G4418 development board, it’s unnecessary to make any modification. Hardware: G4418 SBC is completely compatible with G6818 SBC, it’s only needed to change the SoC to upgrade A9 Quad Core to A53 Octa Core, convenient for clients to upgrade their products.
It meets my needs
And We are looking after electronics company in China that could help us to develop specific CUSTOMIZED Android tablet. It should be tablet with following specifications:
• Custom casing (plastic housing adapted for our Fitness Product)
• WiFi
• Bluetooth 4.0 (4.1 or 5.0 which is coming soon)
• Front camera
• NFC (ISO 14443 protocol), the same protocol used in mobile phones and tablets
• USB interface – one host and device USB port. Android OS should support USB Host functionality and HID device functionality
• ROM memory – 1GB or above
• Internal storage – 4GB or above
• Screen size and resolution – preferably IPS 7'' and optionally 10'' with at least 1024x768 (higher resolutions preferred)
• OS – 5.0 or newer
We don't need following components:
mobile network (2G/3G/LTE)
rear camera
external SD card connector
- Inicie sesión ou rexístrese para enviar comentarios