64 bit Trisquel and 32 bit graphics
- Inicie sesión o regístrese para enviar comentarios
Um, i just figured my machine can run the Trisquel 6.0 64-bit version.
Everything works just fine, though i dunno what is going on on the graphics side. Graphics work well, i just don't know how.
The machine is a Macbook2,1 Mid 2007. It boots in 32-bit EFI mode and loads the 64-bit kernel. The CPU is 64-bit able: http://ark.intel.com/products/27255/Intel-Core2-Duo-Processor-T7200-4M-Cache-2_00-GHz-667-MHz-FSB
$ uname -a Linux MyMachine 3.8.5-gnu #1 SMP Thu Mar 28 21:33:10 PDT 2013 x86_64 x86_64 x86_64 GNU/Linux
For the graphics it says:
$ sudo lshw -c video *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0380000-d03fffff ioport:20e0(size=8) memory:c0000000-cfffffff memory:d0400000-d043ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm cap_list configuration: latency=0 resources: memory:d0300000-d037ffff
so there is some 32-bit thing about the graphics card. but the driver again is 64-bit:
$ file /lib/modules/3.8.5-gnu/kernel/drivers/gpu/drm/i915/i915.ko /lib/modules/3.8.5-gnu/kernel/drivers/gpu/drm/i915/i915.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), BuildID[sha1]=0x55f457d3d49b6158a2170ed218c2520589f902fc, not stripped
please help me understand how and why this works
cheers Mono
The same units are used for widths of different data and address buses.
Your machine probably has some 8-bit, 1-bit or 128-bit buses too, this
is not related to the CPU architecture.
so it is just fine running the 64-bit system which uses 64-bit drivers to talk to components via 32-bit and other buses?
It is. 64-bit refers here to size of addresses and registers, 32-bit to
the amount of data sent at once.
thank you Michał!
i didn't get it to its full extend, well, this is ok for now.
i understand there shouldn't be a problem with my setup. nice :)
- Inicie sesión o regístrese para enviar comentarios