Can't run virtual machine in virtualbox
- Inicie sesión o regístrese para enviar comentarios
I have installed virtualbox from the repositories and created a virtual OS. I tried to start the OS, but I got these error messages.
--------------------
VirtualBox - Error In suplibOsInit
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. If it is available in your distribution, you should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.
----------------
VirtualBox - Error
Failed to open a session for the virtual machine Trisquel.
The virtual machine 'Trisquel' has terminated unexpectedly during startup with exit code 1.
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
Machine
Interface:
IMachine {5eaa9319-62fc-4b0a-843c-0cb1940f8a91}
---------------------
I ran '/etc/init.d/vboxdrv setup' in Terminal as root, but I got this message.
-----------------------
Stopping VirtualBox kernel modules ...done.
Uninstalling old VirtualBox DKMS kernel modules ...done.
Trying to register the VirtualBox kernel modules using DKMS ...done.
Starting VirtualBox kernel modules ...failed!
(modprobe vboxdrv failed. Please use 'dmesg' to find out why)
----------------------------
Can anyone help me?
This is the result of 'dmesg' in Terminal.
--------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-55-generic (name at domain) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #0trisquel1 SMP Mon Nov 4 07:26:41 UTC 2013 (Ubuntu 3.2.0-55.85+6.0trisquel1-generic )
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-55-generic root=UUID=92e91c50-dd49-47e4-9a27-c4ebeca533ef ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf63f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf63f000 - 00000000bf6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6bf000 - 00000000bf7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7bf000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: TOSHIBA Satellite L645/Base Board Product Name, BIOS 1.50 07/06/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE80000 mask FFFF80000 write-protect
[ 0.000000] 2 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 138000000 mask FF8000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ bf63d000-bf63f000
[ 0.000000] RAMDISK: 35d7c000 - 36eb6000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 00000000bf7fe120 00074 (v01 TOSQCI TOSQCI00 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v04 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bf7ec000 0C021 (v02 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bf76e000 00040
[ 0.000000] ACPI: ASF! 00000000bf7fd000 000A5 (v32 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000bf7fa000 0008C (v02 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000bf7eb000 00176 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 00000000bf7e7000 00028 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000bf7e4000 00034 (v04 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 00000000bf7e3000 00224 (v01 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7e2000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bf63f
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 1013197
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 763520 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 225792 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf63f000 - 00000000bf6bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf6bf000 - 00000000bf7bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf7bf000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000
[ 0.000000] PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 993224
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-55-generic root=UUID=92e91c50-dd49-47e4-9a27-c4ebeca533ef ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3888880k/5111808k available (6585k kernel code, 1059020k absent, 163908k reserved, 6620k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2260.809 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.61 BogoMIPS (lpj=9043236)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000032] Security Framework initialized
[ 0.000047] AppArmor: AppArmor initialized
[ 0.000049] Yama: becoming mindful.
[ 0.000388] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001352] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001759] Mount-cache hash table entries: 256
[ 0.001887] Initializing cgroup subsys cpuacct
[ 0.001892] Initializing cgroup subsys memory
[ 0.001900] Initializing cgroup subsys devices
[ 0.001902] Initializing cgroup subsys freezer
[ 0.001904] Initializing cgroup subsys blkio
[ 0.001910] Initializing cgroup subsys perf_event
[ 0.001938] CPU: Physical Processor ID: 0
[ 0.001940] CPU: Processor Core ID: 0
[ 0.001946] mce: CPU supports 9 MCE banks
[ 0.001956] CPU0: Thermal monitoring handled by SMI
[ 0.001964] using mwait in idle threads.
[ 0.004273] ACPI: Core revision 20110623
[ 0.004276] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.004394] ACPI: Forced DSDT copy: length 0x0C021 copied locally, original unmapped
[ 0.035563] ftrace: allocating 26595 entries in 105 pages
[ 0.044599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084203] CPU0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz stepping 02
[ 0.190752] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.190760] ... version: 3
[ 0.190761] ... bit width: 48
[ 0.190762] ... generic registers: 4
[ 0.190764] ... value mask: 0000ffffffffffff
[ 0.190765] ... max period: 000000007fffffff
[ 0.190766] ... fixed-purpose events: 3
[ 0.190768] ... event mask: 000000070000000f
[ 0.190972] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.191059] Booting Node 0, Processors #1
[ 0.191062] smpboot cpu 1: start_ip = 98000
[ 0.278601] CPU1: Thermal monitoring handled by SMI
[ 0.298659] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.298779] #2
[ 0.298781] smpboot cpu 2: start_ip = 98000
[ 0.386381] CPU2: Thermal monitoring handled by SMI
[ 0.406484] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.406589] #3
[ 0.406591] smpboot cpu 3: start_ip = 98000
[ 0.494164] CPU3: Thermal monitoring handled by SMI
[ 0.514193] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.514237] Brought up 4 CPUs
[ 0.514239] Total of 4 processors activated (18087.33 BogoMIPS).
[ 0.517122] devtmpfs: initialized
[ 0.518069] EVM: security.selinux
[ 0.518071] EVM: security.SMACK64
[ 0.518072] EVM: security.capability
[ 0.518114] PM: Registering ACPI NVS region at bf6bf000 (1048576 bytes)
[ 0.519018] print_constraints: dummy:
[ 0.519051] RTC time: 5:50:27, date: 11/29/13
[ 0.519087] NET: Registered protocol family 16
[ 0.519193] Trying to unpack rootfs image as initramfs...
[ 0.519204] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.519207] ACPI: bus type pci registered
[ 0.519285] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.519288] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.556436] PCI: Using configuration type 1 for base access
[ 0.557437] bio: create slab at 0
[ 0.557538] ACPI: Added _OSI(Module Device)
[ 0.557541] ACPI: Added _OSI(Processor Device)
[ 0.557543] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.557545] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.559689] ACPI: EC: Look up EC in DSDT
[ 0.561808] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.613991] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.614616] ACPI: SSDT 00000000bf691918 00402 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.615148] ACPI: Dynamic OEM Table Load:
[ 0.615150] ACPI: SSDT (null) 00402 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.615334] ACPI: SSDT 00000000bf68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.615826] ACPI: Dynamic OEM Table Load:
[ 0.615828] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.662162] ACPI: SSDT 00000000bf690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.662719] ACPI: Dynamic OEM Table Load:
[ 0.662722] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.693943] ACPI: SSDT 00000000bf68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.694472] ACPI: Dynamic OEM Table Load:
[ 0.694475] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.718476] ACPI: Interpreter enabled
[ 0.718483] ACPI: (supports S0 S3 S4 S5)
[ 0.718524] ACPI: Using IOAPIC for interrupt routing
[ 0.766235] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.766666] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.766669] HEST: Table not found.
[ 0.766672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.767044] \_SB_.PCI0:_OSC invalid UUID
[ 0.767046] _OSC request data:1 8 0
[ 0.767050] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.767653] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.767656] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.767659] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.767662] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[ 0.767675] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.767694] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.767716] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 0.767750] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.767754] pci 0000:00:01.0: PME# disabled
[ 0.767801] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.767830] pci 0000:00:16.0: reg 10: [mem 0xd6106100-0xd610610f 64bit]
[ 0.767925] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.767930] pci 0000:00:16.0: PME# disabled
[ 0.767971] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.768379] pci 0000:00:1a.0: reg 10: [mem 0xd6105c00-0xd6105fff]
[ 0.770729] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.770735] pci 0000:00:1a.0: PME# disabled
[ 0.770766] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.770787] pci 0000:00:1b.0: reg 10: [mem 0xd6100000-0xd6103fff 64bit]
[ 0.770885] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.770890] pci 0000:00:1b.0: PME# disabled
[ 0.770918] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.771021] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.771025] pci 0000:00:1c.0: PME# disabled
[ 0.771061] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.771162] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.771167] pci 0000:00:1c.4: PME# disabled
[ 0.771197] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[ 0.771297] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.771301] pci 0000:00:1c.5: PME# disabled
[ 0.771338] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.771736] pci 0000:00:1d.0: reg 10: [mem 0xd6105800-0xd6105bff]
[ 0.774110] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.774115] pci 0000:00:1d.0: PME# disabled
[ 0.774140] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.774228] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 0.774360] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 0.774387] pci 0000:00:1f.2: reg 10: [io 0x6048-0x604f]
[ 0.774398] pci 0000:00:1f.2: reg 14: [io 0x6054-0x6057]
[ 0.774409] pci 0000:00:1f.2: reg 18: [io 0x6040-0x6047]
[ 0.774421] pci 0000:00:1f.2: reg 1c: [io 0x6050-0x6053]
[ 0.774432] pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f]
[ 0.774443] pci 0000:00:1f.2: reg 24: [mem 0xd6105000-0xd61057ff]
[ 0.774510] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.774514] pci 0000:00:1f.2: PME# disabled
[ 0.774538] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.774559] pci 0000:00:1f.3: reg 10: [mem 0xd6106000-0xd61060ff 64bit]
[ 0.774590] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
[ 0.774661] pci 0000:01:00.0: [1002:9553] type 0 class 0x000300
[ 0.774675] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.774685] pci 0000:01:00.0: reg 14: [io 0x5000-0x50ff]
[ 0.774695] pci 0000:01:00.0: reg 18: [mem 0xd6000000-0xd600ffff]
[ 0.774729] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.774768] pci 0000:01:00.0: supports D1 D2
[ 0.774796] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[ 0.774810] pci 0000:01:00.1: reg 10: [mem 0xd6010000-0xd6013fff]
[ 0.774900] pci 0000:01:00.1: supports D1 D2
[ 0.774939] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.774942] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.774945] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd60fffff]
[ 0.774948] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.775004] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.775008] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.775013] pci 0000:00:1c.0: bridge window [mem 0xd5000000-0xd5ffffff]
[ 0.775021] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.775167] pci 0000:03:00.0: [14e4:4727] type 0 class 0x000280
[ 0.775227] pci 0000:03:00.0: reg 10: [mem 0xd4000000-0xd4003fff 64bit]
[ 0.775568] pci 0000:03:00.0: supports D1 D2
[ 0.775570] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.775581] pci 0000:03:00.0: PME# disabled
[ 0.781625] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.781630] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.781635] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd4ffffff]
[ 0.781643] pci 0000:00:1c.4: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.781727] pci 0000:04:00.0: [1969:2060] type 0 class 0x000200
[ 0.781756] pci 0000:04:00.0: reg 10: [mem 0xd3000000-0xd303ffff 64bit]
[ 0.781772] pci 0000:04:00.0: reg 18: [io 0x2000-0x207f]
[ 0.781902] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.781908] pci 0000:04:00.0: PME# disabled
[ 0.789574] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.789580] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.789584] pci 0000:00:1c.5: bridge window [mem 0xd3000000-0xd3ffffff]
[ 0.789592] pci 0000:00:1c.5: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[ 0.789672] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.789685] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.789688] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.789691] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.789693] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[ 0.789727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.789906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.789951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.790034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.790077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.790184] \_SB_.PCI0:_OSC invalid UUID
[ 0.790186] _OSC request data:1 1f 0
[ 0.790190] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.790222] \_SB_.PCI0:_OSC invalid UUID
[ 0.790224] _OSC request data:1 0 1d
[ 0.790227] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.790229] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.794594] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.794673] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.794697] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.794718] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.794736] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.794755] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.794775] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.794809] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.794812] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.794814] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.795053] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.795102] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.795147] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.795192] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.795237] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.795283] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.795329] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.795376] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.795503] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.795508] vgaarb: loaded
[ 0.795509] vgaarb: bridge control possible 0000:01:00.0
[ 0.795606] i2c-core: driver [aat2870] using legacy suspend method
[ 0.795608] i2c-core: driver [aat2870] using legacy resume method
[ 0.795674] SCSI subsystem initialized
[ 0.795746] libata version 3.00 loaded.
[ 0.795791] usbcore: registered new interface driver usbfs
[ 0.795800] usbcore: registered new interface driver hub
[ 0.795826] usbcore: registered new device driver usb
[ 0.795913] PCI: Using ACPI for IRQ routing
[ 0.805798] PCI: pci_cache_line_size set to 64 bytes
[ 0.805925] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 0.805928] reserve RAM buffer: 00000000bf63f000 - 00000000bfffffff
[ 0.805930] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.806049] NetLabel: Initializing
[ 0.806051] NetLabel: domain hash size = 128
[ 0.806052] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.806066] NetLabel: unlabeled traffic allowed by default
[ 0.806140] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.806146] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.808162] Switching to clocksource hpet
[ 0.814420] AppArmor: AppArmor Filesystem Enabled
[ 0.814451] pnp: PnP ACPI init
[ 0.814471] ACPI: bus type pnp registered
[ 0.814828] pnp 00:00: [bus 00-fe]
[ 0.814832] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.814834] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.814836] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.814838] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.814840] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.814842] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.814844] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.814846] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.814848] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.814849] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.814851] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.814853] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.814855] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.814857] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.814859] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.814861] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.814863] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.814865] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[ 0.814867] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.814950] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.814993] pnp 00:01: [io 0x0000-0x001f]
[ 0.814995] pnp 00:01: [io 0x0081-0x0091]
[ 0.814996] pnp 00:01: [io 0x0093-0x009f]
[ 0.814998] pnp 00:01: [io 0x00c0-0x00df]
[ 0.815000] pnp 00:01: [dma 4]
[ 0.815027] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.815035] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.815062] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.815166] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.815192] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.815202] pnp 00:04: [io 0x00f0]
[ 0.815215] pnp 00:04: [irq 13]
[ 0.815241] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.815252] pnp 00:05: [io 0x002e-0x002f]
[ 0.815254] pnp 00:05: [io 0x004e-0x004f]
[ 0.815255] pnp 00:05: [io 0x0061]
[ 0.815257] pnp 00:05: [io 0x0063]
[ 0.815258] pnp 00:05: [io 0x0065]
[ 0.815260] pnp 00:05: [io 0x0067]
[ 0.815261] pnp 00:05: [io 0x0068]
[ 0.815263] pnp 00:05: [io 0x006c]
[ 0.815264] pnp 00:05: [io 0x0070]
[ 0.815266] pnp 00:05: [io 0x0080]
[ 0.815267] pnp 00:05: [io 0x0092]
[ 0.815268] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.815270] pnp 00:05: [io 0x0680-0x069f]
[ 0.815272] pnp 00:05: [io 0x0800-0x080f]
[ 0.815275] pnp 00:05: [io 0x0810-0x0813]
[ 0.815277] pnp 00:05: [io 0xffff]
[ 0.815278] pnp 00:05: [io 0x0400-0x047f]
[ 0.815280] pnp 00:05: [io 0x0500-0x057f]
[ 0.815281] pnp 00:05: [io 0x164e-0x164f]
[ 0.815343] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.815345] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.815348] system 00:05: [io 0x0810-0x0813] has been reserved
[ 0.815350] system 00:05: [io 0xffff] has been reserved
[ 0.815352] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.815354] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.815356] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.815360] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.815368] pnp 00:06: [io 0x0070-0x0077]
[ 0.815374] pnp 00:06: [irq 8]
[ 0.815400] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.815437] pnp 00:07: [io 0x0060]
[ 0.815439] pnp 00:07: [io 0x0064]
[ 0.815445] pnp 00:07: [irq 1]
[ 0.815472] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.815489] pnp 00:08: [irq 12]
[ 0.815517] pnp 00:08: Plug and Play ACPI device, IDs SYN103f PNP0f13 (active)
[ 0.815768] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.815770] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 0.815772] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.815773] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.815775] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.815777] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.815779] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.815781] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.815782] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.815784] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.815786] pnp 00:09: [mem 0xd6200000-0xd6200fff]
[ 0.815787] pnp 00:09: [mem 0xff808000-0xff8080ff]
[ 0.815847] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.815849] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.815852] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.815854] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.815856] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.815859] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.815861] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.815864] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.815866] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.815869] system 00:09: [mem 0xd6200000-0xd6200fff] has been reserved
[ 0.815871] system 00:09: [mem 0xff808000-0xff8080ff] has been reserved
[ 0.815874] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.816025] pnp 00:0a: [bus ff]
[ 0.816064] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.816133] pnp: PnP ACPI: found 11 devices
[ 0.816135] ACPI: ACPI bus type pnp unregistered
[ 0.823487] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.823498] PCI: max bus depth: 1 pci_try_num: 2
[ 0.823545] pci 0000:01:00.0: BAR 6: assigned [mem 0xd6020000-0xd603ffff pref]
[ 0.823548] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.823551] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.823554] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd60fffff]
[ 0.823557] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.823561] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.823565] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.823571] pci 0000:00:1c.0: bridge window [mem 0xd5000000-0xd5ffffff]
[ 0.823576] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.823584] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.823588] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.823594] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd4ffffff]
[ 0.823599] pci 0000:00:1c.4: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.823607] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.823610] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.823617] pci 0000:00:1c.5: bridge window [mem 0xd3000000-0xd3ffffff]
[ 0.823622] pci 0000:00:1c.5: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[ 0.823629] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.823659] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.823663] pci 0000:00:01.0: setting latency timer to 64
[ 0.823675] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.823680] pci 0000:00:1c.0: setting latency timer to 64
[ 0.823688] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.823693] pci 0000:00:1c.4: setting latency timer to 64
[ 0.823701] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.823706] pci 0000:00:1c.5: setting latency timer to 64
[ 0.823714] pci 0000:00:1e.0: setting latency timer to 64
[ 0.823719] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.823721] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.823724] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.823726] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.823728] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.823730] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd60fffff]
[ 0.823733] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.823735] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.823737] pci_bus 0000:02: resource 1 [mem 0xd5000000-0xd5ffffff]
[ 0.823740] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.823742] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.823744] pci_bus 0000:03: resource 1 [mem 0xd4000000-0xd4ffffff]
[ 0.823747] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.823749] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.823751] pci_bus 0000:04: resource 1 [mem 0xd3000000-0xd3ffffff]
[ 0.823753] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref]
[ 0.823756] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.823758] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.823760] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.823763] pci_bus 0000:05: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.823803] NET: Registered protocol family 2
[ 0.823934] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.824732] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.827455] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.827786] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.827788] TCP reno registered
[ 0.827799] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.827836] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.827962] NET: Registered protocol family 1
[ 0.827995] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.844151] pci 0000:00:1a.0: PCI INT A disabled
[ 0.844197] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.860114] pci 0000:00:1d.0: PCI INT A disabled
[ 0.860139] pci 0000:01:00.0: Boot video device
[ 0.860191] PCI: CLS 64 bytes, default 64
[ 0.860193] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.860196] Placing 64MB software IO TLB between ffff8800bb63d000 - ffff8800bf63d000
[ 0.860198] software IO TLB at phys 0xbb63d000 - 0xbf63d000
[ 0.860213] Simple Boot Flag at 0x44 set to 0x1
[ 0.860741] audit: initializing netlink socket (disabled)
[ 0.860754] type=2000 audit(1385704227.680:1): initialized
[ 0.877466] Freeing initrd memory: 17640k freed
[ 0.883551] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.885578] VFS: Disk quotas dquot_6.5.2
[ 0.885630] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.886134] fuse init (API version 7.17)
[ 0.886225] msgmni has been set to 7629
[ 0.886604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.886633] io scheduler noop registered
[ 0.886635] io scheduler deadline registered
[ 0.886666] io scheduler cfq registered (default)
[ 0.886772] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.886803] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.887022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.887040] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.887087] intel_idle: MWAIT substates: 0x1120
[ 0.887089] intel_idle: v0.4 model 0x25
[ 0.887090] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.887205] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.887257] ACPI: AC Adapter [ACAD] (on-line)
[ 0.887370] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.887376] ACPI: Power Button [PWRB]
[ 0.887416] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.887470] ACPI: Lid Switch [LID]
[ 0.887508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.887511] ACPI: Power Button [PWRF]
[ 0.888920] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.888928] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.888956] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.888959] ERST: Table is not found!
[ 0.888961] GHES: HEST is not enabled!
[ 0.889035] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.123917] Linux agpgart interface v0.103
[ 1.125522] brd: module loaded
[ 1.126334] loop: module loaded
[ 1.126448] ahci 0000:00:1f.2: version 3.0
[ 1.126467] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.126520] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.126608] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.126612] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.126617] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.148015] scsi0 : ahci
[ 1.148102] scsi1 : ahci
[ 1.148177] scsi2 : ahci
[ 1.148253] scsi3 : ahci
[ 1.148329] scsi4 : ahci
[ 1.148405] scsi5 : ahci
[ 1.148451] ata1: SATA max UDMA/133 abar m2048@0xd6105000 port 0xd6105100 irq 41
[ 1.148455] ata2: SATA max UDMA/133 abar m2048@0xd6105000 port 0xd6105180 irq 41
[ 1.148457] ata3: DUMMY
[ 1.148458] ata4: DUMMY
[ 1.148461] ata5: SATA max UDMA/133 abar m2048@0xd6105000 port 0xd6105300 irq 41
[ 1.148464] ata6: SATA max UDMA/133 abar m2048@0xd6105000 port 0xd6105380 irq 41
[ 1.148862] Fixed MDIO Bus: probed
[ 1.148879] tun: Universal TUN/TAP device driver, 1.6
[ 1.148880] tun: (C) 1999-2004 Max Krasnyansky <name at domain>
[ 1.148947] PPP generic driver version 2.4.2
[ 1.149061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.149078] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.149096] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.149100] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.149156] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.149191] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.153108] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.153124] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd6105c00
[ 1.167482] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.167650] hub 1-0:1.0: USB hub found
[ 1.167655] hub 1-0:1.0: 3 ports detected
[ 1.167721] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.167736] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.167740] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.167792] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.167820] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.171763] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.171780] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd6105800
[ 1.187442] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.187589] hub 2-0:1.0: USB hub found
[ 1.187593] hub 2-0:1.0: 3 ports detected
[ 1.187653] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.187664] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.187705] usbcore: registered new interface driver libusual
[ 1.187738] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.191080] i8042: Detected active multiplexing controller, rev 1.1
[ 1.192531] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.192538] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.192566] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.192587] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.192608] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.192735] mousedev: PS/2 mouse device common for all mice
[ 1.192935] rtc_cmos 00:06: RTC can wake from S4
[ 1.193059] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.193092] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.193165] device-mapper: uevent: version 1.0.3
[ 1.193245] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: name at domain
[ 1.193340] cpuidle: using governor ladder
[ 1.193481] cpuidle: using governor menu
[ 1.193483] EFI Variables Facility v0.08 2004-May-17
[ 1.193697] TCP cubic registered
[ 1.193793] NET: Registered protocol family 10
[ 1.194245] NET: Registered protocol family 17
[ 1.194251] Registering the dns_resolver key type
[ 1.194495] PM: Hibernation image not present or could not be loaded.
[ 1.194511] registered taskstats version 1
[ 1.207734] Magic number: 5:526:821
[ 1.207917] rtc_cmos 00:06: setting system clock to 2013-11-29 05:50:28 UTC (1385704228)
[ 1.208964] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.208966] EDD information not available.
[ 1.223078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.466988] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.467028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.467072] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.467100] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.468300] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
[ 1.468306] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.468952] ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.40, max UDMA/100
[ 1.469862] ata1.00: configured for UDMA/133
[ 1.470203] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
[ 1.470424] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.470474] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.470750] sd 0:0:0:0: [sda] Write Protect is off
[ 1.470755] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.470907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.471829] ata2.00: configured for UDMA/100
[ 1.478035] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.40 PQ: 0 ANSI: 5
[ 1.478900] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.481576] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.481581] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.481867] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.482027] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.538852] sda: sda1 < sda5 sda6 sda7 > sda3
[ 1.540390] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.541969] Freeing unused kernel memory: 924k freed
[ 1.542129] Write protecting the kernel read-only data: 12288k
[ 1.547086] Freeing unused kernel memory: 1588k freed
[ 1.551197] Freeing unused kernel memory: 1260k freed
[ 1.573449] udevd[109]: starting version 175
[ 1.610998] wmi: Mapper loaded
[ 1.611339] hub 1-1:1.0: USB hub found
[ 1.611419] hub 1-1:1.0: 6 ports detected
[ 1.613640] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 1.615605] acpi device:0a: registered as cooling_device4
[ 1.615709] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input4
[ 1.616604] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.628562] atl1c 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.628577] atl1c 0000:04:00.0: setting latency timer to 64
[ 1.722426] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.755111] atl1c 0000:04:00.0: version 1.0.1.0-NAPI
[ 1.855265] hub 2-1:1.0: USB hub found
[ 1.855463] hub 2-1:1.0: 8 ports detected
[ 1.858175] Refined TSC clocksource calibration: 2261.003 MHz.
[ 1.858184] Switching to clocksource tsc
[ 1.926248] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 2.023447] hub 1-1.1:1.0: USB hub found
[ 2.023627] hub 1-1.1:1.0: 4 ports detected
[ 2.093919] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[ 2.187848] hub 1-1.2:1.0: USB hub found
[ 2.188176] hub 1-1.2:1.0: 4 ports detected
[ 2.261628] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[ 2.457188] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[ 2.569803] Initializing USB Mass Storage driver...
[ 2.569890] usbcore: registered new interface driver usb-storage
[ 2.569893] USB Mass Storage support registered.
[ 2.601712] scsi6 : usb-storage 2-1.4:1.0
[ 2.601892] usbcore: registered new interface driver ums-realtek
[ 2.640943] usb 1-1.2.1: new high-speed USB device number 5 using ehci_hcd
[ 2.795388] scsi7 : usb-storage 1-1.2.1:1.0
[ 2.868524] usb 1-1.2.2: new high-speed USB device number 6 using ehci_hcd
[ 2.962974] scsi8 : usb-storage 1-1.2.2:1.0
[ 3.036211] usb 1-1.2.3: new low-speed USB device number 7 using ehci_hcd
[ 3.110598] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 3.110601] vesafb: scrolling: redraw
[ 3.110603] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.112567] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011180000, using 3072k, total 3072k
[ 3.112903] Console: switching to colour frame buffer device 128x48
[ 3.112930] fb0: VESA VGA frame buffer device
[ 3.144750] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input5
[ 3.144947] generic-usb 0003:1A2C:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.2.3/input0
[ 3.147379] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/input/input6
[ 3.147478] generic-usb 0003:1A2C:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.2.3/input1
[ 3.147491] usbcore: registered new interface driver usbhid
[ 3.147493] usbhid: USB HID core driver
[ 3.211803] usb 1-1.2.4: new low-speed USB device number 8 using ehci_hcd
[ 3.290227] Btrfs loaded
[ 3.295934] xor: automatically using best checksumming function: generic_sse
[ 3.308867] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/input/input7
[ 3.309027] generic-usb 0003:192F:0916.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.2.4/input0
[ 3.309426] usb 2-1.4: USB disconnect, device number 4
[ 3.315223] generic_sse: 8596.000 MB/sec
[ 3.315226] xor: using function: generic_sse (8596.000 MB/sec)
[ 3.315868] device-mapper: dm-raid45: initialized v0.2594b
[ 3.317396] md: linear personality registered for level -1
[ 3.318862] md: multipath personality registered for level -4
[ 3.320228] md: raid0 personality registered for level 0
[ 3.321842] md: raid1 personality registered for level 1
[ 3.323252] async_tx: api initialized (async)
[ 3.391049] raid6: int64x1 2000 MB/s
[ 3.458923] raid6: int64x2 2666 MB/s
[ 3.526823] raid6: int64x4 1763 MB/s
[ 3.594653] raid6: int64x8 1716 MB/s
[ 3.662512] raid6: sse2x1 5536 MB/s
[ 3.730376] raid6: sse2x2 6443 MB/s
[ 3.791141] scsi 7:0:0:0: Direct-Access Seagate Backup+ BL 0412 PQ: 0 ANSI: 6
[ 3.792246] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 3.792610] sd 7:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.798284] raid6: sse2x4 7107 MB/s
[ 3.798286] raid6: using algorithm sse2x4 (7107 MB/s)
[ 3.942024] sd 7:0:0:0: [sdb] Write Protect is off
[ 3.942028] sd 7:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 3.942923] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.953270] sdb: sdb1
[ 3.956863] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 3.958246] md: raid6 personality registered for level 6
[ 3.958249] md: raid5 personality registered for level 5
[ 3.958251] md: raid4 personality registered for level 4
[ 3.958568] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1007 PQ: 0 ANSI: 6
[ 3.959070] scsi 8:0:0:1: Enclosure WD SES Device 1007 PQ: 0 ANSI: 6
[ 3.959762] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 3.959971] scsi 8:0:0:1: Attached scsi generic sg4 type 13
[ 3.961629] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB)
[ 3.962394] sd 8:0:0:0: [sdc] Write Protect is off
[ 3.962399] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08
[ 3.963170] sd 8:0:0:0: [sdc] No Caching mode page present
[ 3.963173] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 3.963680] md: raid10 personality registered for level 10
[ 3.965579] sd 8:0:0:0: [sdc] No Caching mode page present
[ 3.965586] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 3.966241] sdc: sdc1
[ 3.969339] sd 8:0:0:0: [sdc] No Caching mode page present
[ 3.969346] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 3.969352] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 4.299321] ses 8:0:0:1: Attached Enclosure device
[ 10.561067] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 20.018345] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.081682] udevd[544]: starting version 175
[ 20.204698] type=1400 audit(1385704247.530:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=636 comm="apparmor_parser"
[ 20.205167] type=1400 audit(1385704247.530:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser"
[ 20.205456] type=1400 audit(1385704247.530:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
[ 20.394483] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 20.426488] lp: driver loaded but no devices found
[ 20.435512] device-mapper: multipath: version 1.3.1 loaded
[ 20.597977] cfg80211: Calling CRDA to update world regulatory domain
[ 20.602841] cfg80211: World regulatory domain updated:
[ 20.602845] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.602848] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.602850] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.602853] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.602855] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.602857] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.611134] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 20.611273] input: Toshiba input device as /devices/virtual/input/input8
[ 20.612828] Registered led device: toshiba::illumination
[ 20.636900] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.637297] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.637304] mei 0000:00:16.0: setting latency timer to 64
[ 20.637375] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[ 20.937602] brcmsmac 0000:03:00.0: bus 3 slot 0 func 0 irq 10
[ 20.937655] brcmsmac 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.937666] brcmsmac 0000:03:00.0: setting latency timer to 64
[ 20.937713] 0000:03:00.0: Missing Free firmware
[ 20.956133] ieee80211 phy0: brcmsmac: fail to load firmware /*(DEBLOBBED)*/
[ 20.956138] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[ 20.956185] brcmsmac 0000:03:00.0: PCI INT A disabled
[ 20.956237] brcmsmac: brcms_pci_probe: brcms_attach failed!
[ 21.209024] bcma-pci-bridge 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.209046] bcma-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 21.209124] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 21.209155] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 21.209226] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 21.241971] bcma: Bus registered
[ 21.316067] Linux video capture interface: v2.00
[ 21.389654] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 21.389661] psmouse serio4: synaptics: Toshiba Satellite L645 detected, limiting rate to 40pps.
[ 21.425882] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 21.434989] b43-phy1: Broadcom 4313 WLAN found (core revision 24)
[ 21.435879] b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
[ 21.435893] b43: probe of bcma0:0 failed with error -95
[ 21.435922] Broadcom 43xx driver loaded [ Features: PNL ]
[ 21.539769] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[ 21.549572] input: CNF9055 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input10
[ 21.549673] usbcore: registered new interface driver uvcvideo
[ 21.549675] USB Video Class driver (1.1.1)
[ 21.559784] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 21.559862] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 21.559900] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 21.764653] hda_codec: CX20585: BIOS auto-probing.
[ 21.767028] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 21.767344] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 21.770290] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 21.770403] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 21.770437] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 21.813991] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 21.814083] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 22.117354] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 22.332635] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 22.517365] init: failsafe main process (1051) killed by TERM signal
[ 22.803776] type=1400 audit(1385704250.134:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1134 comm="apparmor_parser"
[ 22.804615] type=1400 audit(1385704250.138:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1134 comm="apparmor_parser"
[ 22.808834] type=1400 audit(1385704250.142:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1131 comm="apparmor_parser"
[ 22.809321] type=1400 audit(1385704250.142:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1131 comm="apparmor_parser"
[ 22.809607] type=1400 audit(1385704250.142:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1131 comm="apparmor_parser"
[ 22.832321] type=1400 audit(1385704250.162:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1136 comm="apparmor_parser"
[ 22.835290] type=1400 audit(1385704250.166:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1136 comm="apparmor_parser"
[ 22.892317] ppdev: user-space parallel port driver
[ 22.915713] Bluetooth: Core ver 2.16
[ 22.915733] NET: Registered protocol family 31
[ 22.915735] Bluetooth: HCI device and connection manager initialized
[ 22.915737] Bluetooth: HCI socket layer initialized
[ 22.915739] Bluetooth: L2CAP socket layer initialized
[ 22.915744] Bluetooth: SCO socket layer initialized
[ 22.940766] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.940769] Bluetooth: BNEP filters: protocol multicast
[ 22.958543] Bluetooth: RFCOMM TTY layer initialized
[ 22.958549] Bluetooth: RFCOMM socket layer initialized
[ 22.958551] Bluetooth: RFCOMM ver 1.11
[ 23.017282] atl1c 0000:04:00.0: irq 45 for MSI/MSI-X
[ 23.017396] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 23.165929] pci 0000:01:00.0: power state changed by ACPI to D0
[ 23.165934] pci 0000:01:00.0: power state changed by ACPI to D0
[ 23.165945] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.224055] [drm] Initialized drm 1.1.0 20060810
[ 24.108141] [drm] radeon defaulting to kernel modesetting.
[ 24.108146] [drm] radeon kernel modesetting enabled.
[ 24.108218] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 24.108222] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 24.108280] Console: switching to colour dummy device 80x25
[ 24.108385] radeon 0000:01:00.0: setting latency timer to 64
[ 24.109091] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x1179:0xFDD0).
[ 24.109869] [drm] register mmio base: 0xD6000000
[ 24.109872] [drm] register mmio size: 65536
[ 24.110177] ATOM BIOS: BR37094.003
[ 24.110205] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 24.110209] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 24.111564] [drm] Detected VRAM RAM=512M, BAR=256M
[ 24.111567] [drm] RAM width 64bits DDR
[ 24.111653] [TTM] Zone kernel: Available graphics memory: 1955146 kiB.
[ 24.111655] [TTM] Initializing pool allocator.
[ 24.111688] [drm] radeon: 512M of VRAM memory ready
[ 24.111690] [drm] radeon: 512M of GTT memory ready.
[ 24.111709] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 24.113507] [drm] Loading RV710 Microcode
[ 24.113510] radeon_cp.0: Missing Free firmware
[ 24.115038] [drm:rv770_startup] *ERROR* Failed to load firmware!
[ 24.115044] radeon 0000:01:00.0: disabling GPU acceleration
[ 24.131030] radeon 0000:01:00.0: ffff88012c713000 unpin not necessary
[ 24.131034] radeon 0000:01:00.0: ffff88012c713000 unpin not necessary
[ 24.131630] [drm] Radeon Display Connectors
[ 24.131633] [drm] Connector 0:
[ 24.131635] [drm] LVDS
[ 24.131636] [drm] Encoders:
[ 24.131638] [drm] LCD1: INTERNAL_UNIPHY2
[ 24.131640] [drm] Connector 1:
[ 24.131642] [drm] VGA
[ 24.131645] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 24.131647] [drm] Encoders:
[ 24.131649] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 24.131651] [drm] Connector 2:
[ 24.131653] [drm] HDMI-A
[ 24.131654] [drm] HPD1
[ 24.131657] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 24.131659] [drm] Encoders:
[ 24.131661] [drm] DFP1: INTERNAL_UNIPHY
[ 24.131711] [drm] radeon: power management initialized
[ 24.209291] [drm] fb mappable at 0xC0040000
[ 24.209294] [drm] vram apper at 0xC0000000
[ 24.209296] [drm] size 5787648
[ 24.209297] [drm] fb depth is 24
[ 24.209299] [drm] pitch is 6400
[ 24.209401] fbcon: radeondrmfb (fb0) is primary device
[ 24.209525] Console: switching to colour frame buffer device 170x48
[ 24.209534] fb0: radeondrmfb frame buffer device
[ 24.209536] drm: registered panic notifier
[ 24.209544] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 24.690640] Adding 4881404k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4881404k
[ 29.402376] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 29.408280] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.647478] init: plymouth-stop pre-start process (2454) terminated with status 1
[ 29.935523] Netfilter messages via NETLINK v0.30.
[ 34.357701] eth0: no IPv6 routers present
[ 78.889618] show_signal_msg: 30 callbacks suppressed
[ 78.889623] accounts-daemon[2303]: segfault at 90 ip 00007f2662c08463 sp 00007fff3b131cf0 error 4 in libdbus-1.so.3.5.8[7f2662bf1000+42000]
[ 516.490400] hub 1-1.2:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 516.490775] usb 1-1.2.3: USB disconnect, device number 7
[ 516.953363] usb 1-1.2.3: new low-speed USB device number 9 using ehci_hcd
[ 517.059418] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input14
[ 517.059715] generic-usb 0003:1A2C:0002.0004: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.2.3/input0
[ 517.062417] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/input/input15
[ 517.062686] generic-usb 0003:1A2C:0002.0005: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.2.3/input1
[11287.541756] eth0: no IPv6 routers present
[24143.394455] usb 1-1.1.4: new low-speed USB device number 10 using ehci_hcd
[24143.495008] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input16
[24143.495342] generic-usb 0003:0E8F:0020.0006: input,hidraw3: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1.4/input0
[24143.499697] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/input/input17
[24143.500165] generic-usb 0003:0E8F:0020.0007: input,hidraw4: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1.4/input1
[34519.798151] hub 1-1.2:1.0: port 3 disabled by hub (EMI?), re-enabling...
[34519.798513] usb 1-1.2.3: USB disconnect, device number 9
[34520.180386] usb 1-1.2.3: new low-speed USB device number 11 using ehci_hcd
[34520.286327] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input18
[34520.286616] generic-usb 0003:1A2C:0002.0008: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.2.3/input0
[34520.289123] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/input/input19
[34520.289384] generic-usb 0003:1A2C:0002.0009: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.2.3/input1
[35767.113341] usb 1-1.1.4: USB disconnect, device number 10
[35767.116365] generic-usb 0003:0E8F:0020.0006: can't reset device, 0000:00:1a.0-1.1.4/input0, status -71
[35767.121498] generic-usb 0003:0E8F:0020.0007: can't reset device, 0000:00:1a.0-1.1.4/input1, status -71
[35856.478579] atl1c 0000:04:00.0: irq 45 for MSI/MSI-X
[35856.478983] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[35866.510012] eth0: no IPv6 routers present
[44591.024403] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[44591.026671] SGI XFS Quota Management subsystem
[44591.095425] JFS: nTxBlock = 8192, nTxLock = 65536
[44591.215460] NTFS driver 2.1.30 [Flags: R/O MODULE].
[44591.313514] QNX4 filesystem 0.2.3 registered.
[46127.738521] atl1c 0000:04:00.0: irq 45 for MSI/MSI-X
[46127.738742] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[46138.306935] eth0: no IPv6 routers present
[46158.130956] atl1c 0000:04:00.0: irq 45 for MSI/MSI-X
[46158.131167] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[46168.894294] eth0: no IPv6 routers present
[46871.100982] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Down
[46875.868260] ADDRCONF(NETDEV_UP): eth0: link is not ready
[46876.964815] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[46876.965592] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[46877.949545] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Down
[46881.454539] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[46887.026957] eth0: no IPv6 routers present
[46889.728900] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Down
[46892.100944] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[51144.817918] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
-------------------------------------------
Sounds like the kernel module didn't compile. Try installing the "virtualbox-dkms" package. Additionally running "sudo /etc/init.d/vboxdrv setup" in a terminal should work too. If the module fails to compile you may need a -generic kernel with headers; and if all else fails you might want to try QEMU Launcher which is an alternate virtual machine application. VBox is being phased out due to the latest version being requiring non-free programs to compile it.
I already have virtualbox-dkms installed.
'sudo /etc/init.d/vboxdrv setup' didn't work. I already mentioned that in an earlier post.
>If the module fails to compile you may need a -generic kernel with headers.
How can I do that? Which package do I have to install?
There is another thread on this issue. Myself and a few other people ran into this a while ago. Thanks a ton to Chris(of Think Penguin) for posting this:
https://trisquel.info/en/forum/intstalling-virtualbox-trisquel-6-howto-solved-if-you-need-it
Thanks. Everything works now.
- Inicie sesión o regístrese para enviar comentarios