How to mount Replicant?

6 respuestas [Último envío]
ao
ao
Desconectado/a
se unió: 07/20/2017

Dear Trisquel users,

How do you mount Replicant?
Current Replicant version, Trisquel 7 doesn't detect.

Steps taken:
Tried different USB ports, restarted Trisquel, restarted Replicant.

Thank you.

quantumgravity
Desconectado/a
se unió: 04/22/2013

In replicant, there should be an option to connect your phone as a "mass storage device" via usb.
You have to select this setting. Unfortunately, I cannot recall quite where it was, maybe others can tell you.

If this option is already set, you can do the following:
- remove your phone from the pc
- type "lsusb" in the terminal and post the output here
- reconnect your phone to the pc
- type "lsusb" in the terminal again and post the output

With this information we hopefully can help better.

ao
ao
Desconectado/a
se unió: 07/20/2017

The option to connect your phone as "mass storage device" via usb:

Source: https://redmine.replicant.us/boards/39/topics/9957?r=9963#message-9963
"Settings -> Storage -> tap on the three dot menu (top right) -> USB computer connection"
is not possible.

Terminal Emulator on Replicant then.
"setprop persist.sys.usb.config mass_storage,adb", I guess (s)he means
"setprop persist.sys.usb.config mass_storage adb"
which is my input in the terminal emulator, I get back
"usage: set prop NAME VALUE
Sets an ndroid system property
setprop: max 2 arguments"

Then I found the "Storage & USB" app
Source: https://f-droid.org/packages/com.enrico.filemanager/
Also, no option to set the phone as "mass storage device" via USB.

Thank you.

GNUbahn
Desconectado/a
se unió: 02/19/2016

In replicant tyou have to enable USB debugging under developer options.

When pluging the phone into your computer, the phone should give you a notification about allowing USB debugging via this computer. Accept the fingerprint.

In the panel of your phone, touch the notification about USB for charging and choose File Transfer.

cyrax
Desconectado/a
se unió: 02/07/2016

I had the same problem here is the solution:

As mentioned before, first you need to activate the "Android Debugging" Option under the developer options and then scroll down to the "Network" settings to enable under "USB-Configuration" the point MTP (Media Transfer Protocol).

Now it should work.

Greetings.

MD. SHAHIDUL ISLAM
Desconectado/a
se unió: 10/15/2015

I have bought Symphony V130 smart-phone in Bangladesh. Is possible install Replicant in this device?

Magic Banana

I am a member!

I am a translator!

Desconectado/a
se unió: 07/24/2010