Laptop Keyboard Doesn't Work During BIOS. Can't Install Trisquel.
- Inicie sesión o regístrese para enviar comentarios
I am a member!
Hey guys.
I'm trying to put Trisquel on an 5-year-old Alienware Area51 M9750.
I have two problems:
#1) It will not boot from a CD or USB stick without manually selecting it using F11 during the BIOS. It will only boot from a hard drive.
#2) I cannot manually select to boot from CD/USB because the keyboard is not working during the BIOS. The laptop keyboard works after an OS has been loaded from the HDD, but not during the startup. A USB keyboard also doesn't work during the BIOS process. No surprise there. I also cannot use a PS/2 keyboard because there is no connection for such.
Is this a dead CMOS battery? I used to have this set to boot from CD first before the HDD. If this is a dead CMOS battery, then booting from the HDD might just be the fallback default CMOS options set at the factory.
At any rate, I still don't understand why the keyboard doesn't work during the BIOS until the OS is loaded.
Any advice would be appreciated. Thank you.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Le 12-11-10 03:45 PM, name at domain a écrit :
> Hey guys.
>
> I'm trying to put Trisquel on an 5-year-old Alienware Area51 M9750.
> [...]
>
> At any rate, I still don't understand why the keyboard doesn't work
during the BIOS until the OS is loaded.
[..]
Sounds like a hardware problem.
Get the hard disk out, install Trisquel on it using another system.
F.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: PGP/Mime available upon request
Comment: Using GnuPG with Mozilla - http://www.enigmail.net/
iEYEARECAAYFAlCe4mkACgkQfUcTXFrypNVw9ACg1vswX+ztE2T17XYh/V2ljsAl
8rsAn2YmLyM9l3a5A1zEOG0gGHYSAVNT
=RohY
-----END PGP SIGNATURE-----
Do you have a USB keyboard laying around that you could plug in? That might work.
I am a member!
1. You can try booting the image right from your hard disk, I didn't play with this, so I can't be of help but you can check duckduckgo or google.
2. I agree with MagicFab, even thou is more complicated, your best bet would be to remove the hard drive and install on another system.
- Inicie sesión o regístrese para enviar comentarios