probando RCgnutrisquel3, solo un problemilla
- Inicie sesión o regístrese para enviar comentarios
hola Ruben, hola a todos,(hace tiempo que no escribía en el foro)
A ver si alguien puede ayudarme, estoy tratando de configurar bbtv desde consola para poder ver tvtime,
En la anterior versión funcionaba, (a veces cambiando de canal se bloqueaba el ordena entero), pero conseguí configurar primero; ahora cuando lo intento:
gnu@trisquel:~$ modprobe bttv tuner="0" card="1"
WARNING: All config files need .conf: /etc/modprobe.d/disable-ipv6, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/disable-pcsp, it will be ignored in a future release.
argh : (
ah! tambien: Por cierto mientras los desafortunados usuarios de tarjetas gráficas ati seguimos esperando a que liberen la parte privativa grrrrrr amd ati,
bueno el caso es que en la anterior version de trisquel al lanzar elisa media center ,contestaba que la configuracion grafica na na, que no iba por aceleracion 3d, pues en esta version a mi me va!! algo lento pero funciona : D
hasta luee
> WARNING: All config files need .conf: /etc/modprobe.d/disable-ipv6, it
> will be ignored in a future release.
> WARNING: All config files need .conf: /etc/modprobe.d/disable-pcsp, it
> will be ignored in a future release.
Estos errores no tienen nada que ver con tu tarjeta, pero gracias por
comentarlo, los arreglaremos. Envío un informe de error:
http://trisquel.info/en/warnings-when-using-modprobe
En cuanto a tu tarjeta, ejecuta el comando dmesg despues de modprobe, para
ver qué mensajes da el kernel al insertar el módulo.
> bueno el caso es que en la anterior version de trisquel al lanzar elisa
> media center ,contestaba que la configuracion grafica na na, que no iba
> por aceleracion 3d, pues en esta version a mi me va!! algo lento pero
> funciona : D
Esta versión de elisa puede utilizarse, como en tu caso, mediante
renderizado por software. Por eso va algo lento.
_______________________________________________
Trisquel-usuarios mailing list
name at domain
http://listas.trisquel.info/cgi-bin/mailman/listinfo/trisquel-usuarios
adjunto el chorizo digital de respuesta al dmesg:
:? ,tengo que seguir estudiando para entenderlo:
[ 0.581714] pci 0000:00:0e.0: bridge 32bit mmio pref: [0xee000000-0xeeffffff]
[ 0.581721] bus 00 -> node 0
[ 0.581729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.581953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.582292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.639911] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.640127] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.640332] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.640533] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.640737] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.640943] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.641146] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.641349] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.641552] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.641757] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.641959] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.642163] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.642378] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.642580] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.642783] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.642985] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.643196] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.643409] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.643585] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[ 0.643742] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 0.643900] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 0.644064] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 0.644222] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 0.644448] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.644671] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 0.644893] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 0.645116] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 0.645339] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 0.645561] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 0.645721] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 0.645942] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.646164] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 0.646388] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 0.646611] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.646843] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
[ 0.647083] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0
[ 0.647220] ACPI: Power Resource [ISAV] (on)
[ 0.647307] ACPI: WMI: Mapper loaded
[ 0.647538] SCSI subsystem initialized
[ 0.647578] libata version 3.00 loaded.
[ 0.647628] usbcore: registered new interface driver usbfs
[ 0.647646] usbcore: registered new interface driver hub
[ 0.647670] usbcore: registered new device driver usb
[ 0.647777] PCI: Using ACPI for IRQ routing
[ 0.647872] Bluetooth: Core ver 2.13
[ 0.647872] NET: Registered protocol family 31
[ 0.647872] Bluetooth: HCI device and connection manager initialized
[ 0.647872] Bluetooth: HCI socket layer initialized
[ 0.647872] NET: Registered protocol family 8
[ 0.647872] NET: Registered protocol family 20
[ 0.647872] NetLabel: Initializing
[ 0.647872] NetLabel: domain hash size = 128
[ 0.647872] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.647872] NetLabel: unlabeled traffic allowed by default
[ 0.648072] AppArmor: AppArmor Filesystem Enabled
[ 0.648094] pnp: PnP ACPI init
[ 0.648108] ACPI: bus type pnp registered
[ 0.653442] pnp: PnP ACPI: found 13 devices
[ 0.653445] ACPI: ACPI bus type pnp unregistered
[ 0.653449] PnPBIOS: Disabled by ACPI PNP
[ 0.653465] system 00:00: ioport range 0x4000-0x407f has been reserved
[ 0.653468] system 00:00: ioport range 0x4080-0x40ff has been reserved
[ 0.653471] system 00:00: ioport range 0x4400-0x447f has been reserved
[ 0.653474] system 00:00: ioport range 0x4480-0x44ff has been reserved
[ 0.653477] system 00:00: ioport range 0x4800-0x487f has been reserved
[ 0.653480] system 00:00: ioport range 0x4880-0x48ff has been reserved
[ 0.653487] system 00:01: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.653490] system 00:01: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.653493] system 00:01: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.653496] system 00:01: iomem range 0xfc000-0xfffff could not be reserved
[ 0.653499] system 00:01: iomem range 0x2fff0000-0x2fffffff could not be reserved
[ 0.653502] system 00:01: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.653505] system 00:01: iomem range 0x0-0x9ffff could not be reserved
[ 0.653508] system 00:01: iomem range 0x100000-0x2ffeffff could not be reserved
[ 0.653511] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.653515] system 00:01: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.653518] system 00:01: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.653521] system 00:01: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.653528] system 00:01: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.653531] system 00:01: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.653538] system 00:03: ioport range 0xb78-0xb7b has been reserved
[ 0.653541] system 00:03: ioport range 0xf78-0xf7b has been reserved
[ 0.653544] system 00:03: ioport range 0xa78-0xa7b has been reserved
[ 0.653547] system 00:03: ioport range 0xe78-0xe7b has been reserved
[ 0.653549] system 00:03: ioport range 0xbbc-0xbbf has been reserved
[ 0.653552] system 00:03: ioport range 0xfbc-0xfbf has been reserved
[ 0.653555] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.653558] system 00:03: ioport range 0x294-0x297 has been reserved
[ 0.688274] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01
[ 0.688277] pci 0000:00:0b.0: IO window: 0xc000-0xcfff
[ 0.688282] pci 0000:00:0b.0: MEM window: 0xec000000-0xecffffff
[ 0.688286] pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff
[ 0.688292] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 0.688294] pci 0000:00:0e.0: IO window: 0xd000-0xdfff
[ 0.688298] pci 0000:00:0e.0: MEM window: 0xed000000-0xedffffff
[ 0.688301] pci 0000:00:0e.0: PREFETCH window: 0x000000ee000000-0x000000eeffffff
[ 0.688313] pci 0000:00:0e.0: setting latency timer to 64
[ 0.688317] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.688319] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.688321] bus: 01 index 0 io port: [0xc000-0xcfff]
[ 0.688324] bus: 01 index 1 mmio: [0xec000000-0xecffffff]
[ 0.688326] bus: 01 index 2 mmio: [0xd8000000-0xe7ffffff]
[ 0.688328] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.688330] bus: 02 index 0 io port: [0xd000-0xdfff]
[ 0.688333] bus: 02 index 1 mmio: [0xed000000-0xedffffff]
[ 0.688335] bus: 02 index 2 mmio: [0xee000000-0xeeffffff]
[ 0.688337] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.688351] NET: Registered protocol family 2
[ 0.688481] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.688834] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.690036] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.690662] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.690666] TCP reno registered
[ 0.690783] NET: Registered protocol family 1
[ 0.690923] checking if image is initramfs... it is
[ 1.191985] Switched to high resolution mode on CPU 0
[ 1.402312] Freeing initrd memory: 8214k freed
[ 1.402434] cpufreq: No nForce2 chipset.
[ 1.402571] audit: initializing netlink socket (disabled)
[ 1.402587] type=2000 audit(1248348263.400:1): initialized
[ 1.411062] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.412381] VFS: Disk quotas dquot_6.5.1
[ 1.412448] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.413105] fuse init (API version 7.10)
[ 1.413192] msgmni has been set to 1498
[ 1.413413] alg: No test for stdrng (krng)
[ 1.413425] io scheduler noop registered
[ 1.413427] io scheduler anticipatory registered
[ 1.413429] io scheduler deadline registered
[ 1.413454] io scheduler cfq registered (default)
[ 1.444063] pci 0000:01:00.0: Boot video device
[ 1.450483] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.450493] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.450639] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.450642] ACPI: Power Button (FF) [PWRF]
[ 1.450684] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.450687] ACPI: Power Button (CM) [PWRB]
[ 1.450740] fan PNP0C0B:00: registered as cooling_device0
[ 1.450746] ACPI: Fan [FAN] (on)
[ 1.451291] processor ACPI_CPU:00: registered as cooling_device1
[ 1.455961] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.456807] ACPI: Thermal Zone [THRM] (0 C)
[ 1.456859] isapnp: Scanning for PnP cards...
[ 1.810290] isapnp: No Plug & Play device found
[ 1.811532] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.811616] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.811700] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.811971] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.812093] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.812836] brd: module loaded
[ 1.813168] loop: module loaded
[ 1.813270] Fixed MDIO Bus: probed
[ 1.813277] PPP generic driver version 2.4.2
[ 1.813341] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.813375] Driver 'sd' needs updating - please use bus_type methods
[ 1.813384] Driver 'sr' needs updating - please use bus_type methods
[ 1.813491] sata_promise 0000:02:0b.0: version 2.12
[ 1.813734] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 1.813744] sata_promise 0000:02:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 1.813953] scsi0 : sata_promise
[ 1.814071] scsi1 : sata_promise
[ 1.814121] scsi2 : sata_promise
[ 1.814161] ata1: SATA max UDMA/133 mmio m4096@0xed020000 ata 0xed020200 irq 18
[ 1.814164] ata2: SATA max UDMA/133 mmio m4096@0xed020000 ata 0xed020280 irq 18
[ 1.814167] ata3: PATA max UDMA/133 mmio m4096@0xed020000 ata 0xed020300 irq 18
[ 2.132018] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.452017] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.608149] sata_nv 0000:00:0a.0: version 3.5
[ 2.608610] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 2.608619] sata_nv 0000:00:0a.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, high) -> IRQ 22
[ 2.608665] sata_nv 0000:00:0a.0: setting latency timer to 64
[ 2.608752] scsi3 : sata_nv
[ 2.608831] scsi4 : sata_nv
[ 2.609020] ata4: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xea00 irq 22
[ 2.609024] ata5: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xea08 irq 22
[ 3.232096] pata_amd 0000:00:08.0: version 0.3.10
[ 3.232155] pata_amd 0000:00:08.0: power state changed by ACPI to D0
[ 3.232205] pata_amd 0000:00:08.0: setting latency timer to 64
[ 3.232293] scsi5 : pata_amd
[ 3.232366] scsi6 : pata_amd
[ 3.233159] ata6: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 3.233162] ata7: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.432553] ata6.00: ATA-7: ST3160815A, 3.AAD, max UDMA/100
[ 3.432556] ata6.00: 312581808 sectors, multi 16: LBA48
[ 3.432581] ata6: nv_mode_filter: 0x3f39f&0x701f->0x701f, BIOS=0x7000 (0xc00000c0) ACPI=0x701f (60:600:0x13)
[ 3.499149] ata6.00: configured for UDMA/33
[ 3.684361] ata7.00: ATAPI: Hewlett-Packard CD-Writer cd16n, 1.15, max MWDMA2
[ 3.684399] ata7.01: ATAPI: SONY DVD-ROM DDU1211, IYH1, max UDMA/33
[ 3.684424] ata7: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc00000c0) ACPI=0x39f (120:60:0x1e)
[ 3.684429] ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc00000c0) ACPI=0x701f (120:60:0x1e)
[ 3.700295] ata7.00: configured for MWDMA2
[ 3.716198] ata7.01: configured for UDMA/33
[ 3.716760] scsi 5:0:0:0: Direct-Access ATA ST3160815A 3.AA PQ: 0 ANSI: 5
[ 3.716880] sd 5:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.716897] sd 5:0:0:0: [sda] Write Protect is off
[ 3.716900] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.716922] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.716999] sd 5:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.717012] sd 5:0:0:0: [sda] Write Protect is off
[ 3.717014] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.717035] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.717040] sda: sda1 sda2 sda3 < sda5 > sda4
[ 3.763551] sd 5:0:0:0: [sda] Attached SCSI disk
[ 3.763608] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 3.766477] scsi 6:0:0:0: CD-ROM HP CD-Writer cd16n 1.15 PQ: 0 ANSI: 5
[ 3.769497] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.769501] Uniform CD-ROM driver Revision: 3.20
[ 3.769614] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3.769659] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 3.770026] scsi 6:0:1:0: CD-ROM SONY DVD-ROM DDU1211 IYH1 PQ: 0 ANSI: 5
[ 3.772170] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 3.772242] sr 6:0:1:0: Attached scsi CD-ROM sr1
[ 3.772284] sr 6:0:1:0: Attached scsi generic sg2 type 5
[ 3.772727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.773114] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 3.773124] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 21 (level, high) -> IRQ 21
[ 3.773149] ehci_hcd 0000:00:02.2: setting latency timer to 64
[ 3.773152] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 3.773220] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 3.773249] ehci_hcd 0000:00:02.2: debug port 1
[ 3.773253] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[ 3.773269] ehci_hcd 0000:00:02.2: irq 21, io mem 0xef004000
[ 3.784021] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 3.784094] usb usb1: configuration #1 chosen from 1 choice
[ 3.784127] hub 1-0:1.0: USB hub found
[ 3.784136] hub 1-0:1.0: 8 ports detected
[ 3.784253] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.784629] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 3.784638] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, high) -> IRQ 20
[ 3.784661] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.784664] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.784728] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.784752] ohci_hcd 0000:00:02.0: irq 20, io mem 0xef002000
[ 3.842074] usb usb2: configuration #1 chosen from 1 choice
[ 3.842101] hub 2-0:1.0: USB hub found
[ 3.842112] hub 2-0:1.0: 4 ports detected
[ 3.842544] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
[ 3.842550] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 22 (level, high) -> IRQ 22
[ 3.842570] ohci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.842573] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 3.842624] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 3.842639] ohci_hcd 0000:00:02.1: irq 22, io mem 0xef003000
[ 3.898048] usb usb3: configuration #1 chosen from 1 choice
[ 3.898074] hub 3-0:1.0: USB hub found
[ 3.898083] hub 3-0:1.0: 4 ports detected
[ 3.898181] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.898273] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.898276] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.898598] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.898712] mice: PS/2 mouse device common for all mice
[ 3.898849] rtc_cmos 00:05: RTC can wake from S4
[ 3.898886] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.898907] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 3.898979] device-mapper: uevent: version 1.0.3
[ 3.899102] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: name at domain
[ 3.899149] device-mapper: multipath: version 1.0.5 loaded
[ 3.899152] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.899243] EISA: Probing bus 0 at eisa.0
[ 3.899257] Cannot allocate resource for EISA slot 4
[ 3.899268] EISA: Detected 0 cards.
[ 3.899297] cpuidle: using governor ladder
[ 3.899299] cpuidle: using governor menu
[ 3.899833] TCP cubic registered
[ 3.899935] NET: Registered protocol family 10
[ 3.900359] lo: Disabled Privacy Extensions
[ 3.900670] NET: Registered protocol family 17
[ 3.900692] Bluetooth: L2CAP ver 2.11
[ 3.900694] Bluetooth: L2CAP socket layer initialized
[ 3.900697] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.900698] Bluetooth: SCO socket layer initialized
[ 3.900748] Bluetooth: RFCOMM socket layer initialized
[ 3.900757] Bluetooth: RFCOMM TTY layer initialized
[ 3.900759] Bluetooth: RFCOMM ver 1.10
[ 3.900792] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[ 3.900827] ACPI Exception (processor_perflib-0270): AE_NOT_FOUND, Evaluating _PSS [20080926]
[ 3.908170] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 3.908223] ACPI Exception (processor_perflib-0270): AE_NOT_FOUND, Evaluating _PSS [20080926]
[ 3.908235] Using IPI No-Shortcut mode
[ 3.908342] registered taskstats version 1
[ 3.908474] Magic number: 1:275:429
[ 3.908561] rtc_cmos 00:05: setting system clock to 2009-07-23 11:24:26 UTC (1248348266)
[ 3.908564] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.908566] EDD information not available.
[ 3.909162] Freeing unused kernel memory: 532k freed
[ 3.909313] Write protecting the kernel text: 4112k
[ 3.909362] Write protecting the kernel read-only data: 1528k
[ 3.943242] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.995227] compcache: Compressed swap size set to: 191988 KB
[ 3.995728] TLSF: pool: f08f4000, init_size=16384, max_size=0, grow_size=16384
[ 4.280034] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 4.495232] usb 3-2: configuration #1 chosen from 1 choice
[ 4.495988] FDC 0 is a post-1991 82077
[ 4.858228] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 4.858620] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 4.858626] forcedeth 0000:00:05.0: PCI INT A -> Link[APCH] -> GSI 21 (level, high) -> IRQ 21
[ 4.858632] forcedeth 0000:00:05.0: setting latency timer to 64
[ 4.858690] nv_probe: set workaround bit for reversed mac addr
[ 5.250840] Adding 191984k swap on /dev/ramzswap0. Priority:100 extents:1 across:191984k
[ 5.377045] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x3f1 @ 1, addr 00:00:00:2b:07:fa
[ 5.377050] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
[ 5.451116] usbcore: registered new interface driver hiddev
[ 5.459183] input: Genius NetScroll + Traveler as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0/input/input4
[ 5.459579] generic-usb 0003:0458:002E.0001: input,hidraw0: USB HID v1.10 Mouse [Genius NetScroll + Traveler] on usb-0000:00:02.1-2/input0
[ 5.459601] usbcore: registered new interface driver usbhid
[ 5.459605] usbhid: v2.6:USB HID core driver
[ 5.672922] PM: Starting manual resume from disk
[ 5.672928] PM: Resume from partition 8:5
[ 5.672930] PM: Checking hibernation image.
[ 5.673205] PM: Resume from disk failed.
[ 5.704121] EXT4-fs: barriers enabled
[ 5.720507] kjournald2 starting. Commit interval 5 seconds
[ 5.720529] EXT4-fs: delayed allocation enabled
[ 5.720532] EXT4-fs: file extents enabled
[ 5.730107] EXT4-fs: mballoc enabled
[ 5.730114] EXT4-fs: mounted filesystem with ordered data mode.
[ 9.547405] udev: starting version 141
[ 9.689895] Linux agpgart interface v0.103
[ 9.731479] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[ 9.731510] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[ 9.734055] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 9.743032] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 9.743082] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 9.762383] parport_pc 00:0b: reported by Plug and Play ACPI
[ 9.762429] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.983928] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.026004] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.515842] Linux video capture interface: v2.00
[ 10.528060] ppdev: user-space parallel port driver
[ 10.574306] bttv: driver version 0.9.17 loaded
[ 10.574311] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.574547] bttv: Bt8xx card found (0).
[ 10.574786] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 10.574796] bttv 0000:02:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 10.574806] bttv0: Bt848 (rev 18) at 0000:02:08.0, irq: 16, latency: 32, mmio: 0xee000000
[ 10.574897] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 10.574940] bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
[ 10.575558] tveeprom 2-0050: Huh, no eeprom present (err=-6)?
[ 10.575561] bttv0: tuner type unset
[ 10.575564] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 10.576073] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 10.581703] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 10.582355] bttv0: registered device video0
[ 10.582407] bttv0: registered device vbi0
[ 10.684769] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[ 10.684776] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
[ 10.684860] Intel ICH 0000:00:06.0: setting latency timer to 64
[ 11.008010] intel8x0_measure_ac97_clock: measured 52832 usecs
[ 11.008014] intel8x0: clocking to 46817
[ 11.148460] lp0: using parport0 (interrupt-driven).
[ 11.300179] Adding 2265124k swap on /dev/sda5. Priority:-1 extents:1 across:2265124k
[ 11.846627] EXT4 FS on sda2, internal journal on sda2:8
[ 13.001480] type=1505 audit(1248348275.591:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1976
[ 13.001686] type=1505 audit(1248348275.591:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1976
[ 13.001748] type=1505 audit(1248348275.591:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1976
[ 13.001803] type=1505 audit(1248348275.591:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1976
[ 13.179235] type=1505 audit(1248348275.767:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1981
[ 13.179514] type=1505 audit(1248348275.767:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1981
[ 16.244261] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.244267] Bluetooth: BNEP filters: protocol multicast
[ 16.264727] Bridge firewalling registered
[ 17.356378] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 17.356387] pci 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 32.256021] eth0: no IPv6 routers present
[ 1231.363580] bttv0: unloading
[ 1262.194411] bttv: driver version 0.9.17 loaded
[ 1262.194416] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 1262.194477] bttv: Bt8xx card found (0).
[ 1262.194490] bttv0: Bt848 (rev 18) at 0000:02:08.0, irq: 16, latency: 32, mmio: 0xee000000
[ 1262.194567] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,insmod option]
[ 1262.194605] bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
[ 1262.195265] tveeprom 2-0050: Huh, no eeprom present (err=-6)?
[ 1262.195269] bttv0: tuner type=1
[ 1262.195272] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 1262.205070] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 1262.205562] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 1262.277724] All bytes are equal. It is not a TEA5767
[ 1262.277812] tuner' 2-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 1262.289684] tuner-simple 2-0060: creating new instance
[ 1262.289689] tuner-simple 2-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
[ 1262.290339] tuner' 2-0061: chip found @ 0xc2 (bt848 #0 [sw])
[ 1262.298046] bttv0: registered device video0
[ 1262.298078] bttv0: registered device vbi0
[ 1387.971722] bt878: AUDIO driver version 0.0.0 loaded
[ 1542.540520] bttv0: unloading
[ 1542.540552] tuner-simple 2-0060: destroying instance
[ 1893.755706] bttv: driver version 0.9.17 loaded
[ 1893.755711] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 1893.755771] bttv: Bt8xx card found (0).
[ 1893.755784] bttv0: Bt848 (rev 18) at 0000:02:08.0, irq: 16, latency: 32, mmio: 0xee000000
[ 1893.755863] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,insmod option]
[ 1893.755899] bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
[ 1893.764161] All bytes are equal. It is not a TEA5767
[ 1893.764251] tuner' 2-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 1893.764410] tuner' 2-0061: chip found @ 0xc2 (bt848 #0 [sw])
[ 1893.775618] tveeprom 2-0050: Huh, no eeprom present (err=-6)?
[ 1893.775624] bttv0: tuner type=1
[ 1893.775973] tuner-simple 2-0060: creating new instance
[ 1893.775977] tuner-simple 2-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
[ 1893.776532] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 1893.777541] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 1893.778036] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 1893.780789] bttv0: registered device video0
[ 1893.780816] bttv0: registered device vbi0
[26310.302605] EXT4-fs: barriers enabled
[26310.312985] kjournald2 starting. Commit interval 5 seconds
[26310.313388] EXT4 FS on sda1, internal journal on sda1:8
[26310.313391] EXT4-fs: delayed allocation enabled
[26310.313393] EXT4-fs: file extents enabled
[26310.319712] EXT4-fs: mballoc enabled
[26310.319720] EXT4-fs: mounted filesystem with ordered data mode.
[26343.256654] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[26343.256660] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[26343.256663] EXT4-fs: mballoc: 0 generated and it took 0
[26343.256666] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[27698.650979] bttv0: unloading
[27698.651008] tuner-simple 2-0060: destroying instance
[27715.275752] bttv: driver version 0.9.17 loaded
[27715.275757] bttv: using 8 buffers with 2080k (520 pages) each for capture
[27715.275817] bttv: Bt8xx card found (0).
[27715.275830] bttv0: Bt848 (rev 18) at 0000:02:08.0, irq: 16, latency: 32, mmio: 0xee000000
[27715.275869] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,insmod option]
[27715.275905] bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
[27715.279677] tveeprom 2-0050: Huh, no eeprom present (err=-6)?
[27715.279683] bttv0: tuner type=1
[27715.279688] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[27715.280459] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[27715.280954] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[27715.289548] All bytes are equal. It is not a TEA5767
[27715.289635] tuner' 2-0060: chip found @ 0xc0 (bt848 #0 [sw])
[27715.289970] tuner-simple 2-0060: creating new instance
[27715.289973] tuner-simple 2-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
[27715.290610] tuner' 2-0061: chip found @ 0xc2 (bt848 #0 [sw])
[27715.301406] bttv0: registered device video0
[27715.301438] bttv0: registered device vbi0
[45044.072404] tuner-simple 2-0060: destroying instance
Actualización:
Después de chatear en xchat irc canal #trisquel, y de seguir trasteando y haciendo pruebas con modprobe y tvtime, ¡funciona! veo y oigo la tv sin problemas : ) (debían ser las opciones de tuner / card)
Por cierto Ruben u otros usuarios del foro, ¿Hay alguna manera de editar el primer comentario para pornerlo como solucionado?
En fin, hasta la próxima gnus : D
Una pregunta tengo linux ubuntu 9.0.4 i el avast medetecta un virus (virus js:scripsh-inf [trj]) i no lo puede eliminar ni rmover me podeis ayudar gracias.
Hola 20killbill,
Trataré de ayudarte,
Primero: llevo usando ubuntu desde la version 4, y linux algo antes, jamás he encontrado un virus que afectase a gnu linux.
Yo de ti usaría este programa de internet para subir el archivo sospechoso y que sea comprobado por varios motores de programas antivirus:
( http://www.virustotal.com/es/ ), o si buscas un rootkit que nos afecte a los gnu linux ( yo aquí instalaría chkrootkit y rkhunter )
Segundo: he buscado por internete y (virus js:scripsh-inf [trj] ) aparece en foros como un falsa alerta, algunos concretamente hablan de un fallo entre avast antivirus y un añadido de firefox llamado cool iris, si usas ambos,puedes ser otro más (http://forums.3drealms.com/vb/showthread.php?t=34864).
Tercero y despedida: Supongo que es solo cuestión de tiempo que algún malnacido con mucho tiempo libre produzca un virus multiplataforma o concretamente que ataque a nuestros queridos sistemas libres... no obstante no parece que este sea el caso, hasta lue ya me contarás : )
Hola muuu te pongo lo que me pone el avas , pq no creo que sea un fallo con el firefox : virus name js:scripsh-inf [trj]
File name:/var/lib/clamav/daily.cld.i cuando le doy a borrar o romover me sale una ventana diciendo lo siguiente:couldn't rename file '/var/lib/clamav/daily.cld' to '/home/javier/scannedfiles/daily.cld.vir'.i le doy en detalles i me sale :an error occured in avast! engine:permiso denegado
lo pongo por si sirve, muchas gracias por ayudarme estoy aciendo lo que as puesto, me podias decir donde lo consigo esto,(instalaría chkrootkit y rkhunter ).eske el ubuntu me lo
instale ayer i soy un novato en este sistema perdon por las molestias i gracias por la ayuda te lo agradezco
> el ubuntu me lo
> instale ayer i soy un novato en este sistema perdon por las molestias i
> gracias por la ayuda te lo agradezco
Este foro es para usuarios de Trisquel GNU/Linux, los foros de Ubuntu
están en http://ubuntuforums.org/
Avast es un programa privativo que no respeta la libertad de los usuarios.
Por favor, no deis consejos sobre como utilizar software privativo, y
menos aún en los foros de Trisquel.
Gracias,
Rubén
PS: killbill, no necesitas antivirus en GNU/Linux. Desinstala Avast y
olvidate de los virus.
_______________________________________________
Trisquel-usuarios mailing list
name at domain
http://listas.trisquel.info/cgi-bin/mailman/listinfo/trisquel-usuarios
A ver:
Instalar y utilizar chkrootkit y rkhunter en distribuciones linux basadas en ubuntu:
Abre terminal, consola o como llamen a la linea de comandos, y escribe:
sudo aptitude install chkrootkit
, una vez instalado cuando quieras pasarlo de nuevo en la linea de comandos:
sudo chkrootkit
Para rkhunter:
sudo aptitude install rkhunter
(luego actualizamos)
sudo rkhunter --update
(y para pasarlo)
sudo rkhunter --checkall
(hay que ir dandole a enter conforme comprueba partes, no asustarse de warnings y LEER el resumen final)
No desesperes si instalaste ayer, ánimos y busca en foros como los que te dice Ruben y en buscadores en general información, y en cuanto puedas, y valores ventajas e incovenientes te animo a que instales en una partición o como prefieras una distribución totalmente gnu y libre, como son segun la free software foundation:
http://www.gnu.org/distros/free-distros.es.html
-----
Oye otra cosa, lo que detecta tu antivirus,
¿no será la base de datos de otro antivirus (libre por cierto), que tienes instalado llamado clamav?
Desemparanoyate con los virus, : ) ,supongo que vendrás de usar un sistema operativo muy usado y con mucha tendencia a pringarse de virus, adaware, malware, y todo tipo de mierdoware.
si tengo uno que te viene en añadir i quitar programas ClamTk is a GUI front-end for ClamAV using perl-Gtk2. vengo de windows xp i ahi tenia virus adware i speware todo los dias. i gracias de nuevo desistalare los antivirus si dicen que no hay virus es ke no abra i perdonen si aya escrito algo en foro que no se puede i e leido que linux no detecta targetas de sonido i grafica integradas, es verdad ? i gracias cuidense
I am a translator!
¿o por qué no pruebas Trisquel?
Saludos
Jose Benito
Lo importante es ser libre. No usar "linux"
holas,
Este comentario lo empezé por no aclararme con la configuración de modprobe para poder ver la cajatonta/television con tvtime, resuelto el problema; y no sabiendo como ponerlo en el primer comentario, lo pongo aquí:
COMENTARIO DEL FORO RESUELTO
siiiiiii : )
A ver si los de amd-ati liberan lo que esconden y añado lo mismo en los de no aceleracion gráfica con tarjeta gráfica ati 9200 : (
hasta la próxima gnuseros
- Inicie sesión o regístrese para enviar comentarios