Trisquel 6.0 bloque parfois

Cherche dans les logs si tu peux trouver une piste d'explication. Pour cela, il y a la commande dmesg, le répertoire /var/logs, l'application Visionneur de fichiers système (un nom dans ce genre...). Bonne chance.

En passant, Trisquel 6.5 n'existe pas; où as-tu vu ce numéro de version ?

Pour Trisquel 6.5, je viens de trouver cette discussion :

https://trisquel.info/en/forum/after-version-6-trisquel-moving-lts-only-releases

(à partir du point 5 du premier message)

Mais, au début, j'avais lu sur la page suivante :

https://www.thinkpenguin.com/gnu-linux/home-theater-pc-libre-style-v3

"Supported distributions:

Trisquel 5, 5.5, 6, 6.5
Ubuntu 11.10, 12.04, 12.10, 13.04
LinuxMint 12, 13, 14, 14.1, 15"

Je m'étais alors dit que 6.5 existait.

Quand je tape dmesg dans le terminal, il arrive tout un charabia que je ne comprends pas, et dont je peux ne même pas affichier le début (ne peux pas glisser plus haut que tant) tant il est long. Y a-t-il un moyen de tout lire et copier ? Quand je sélectionne et copie tout ici, voilà juste la "fin" :

[ 3.649367] md: raid0 personality registered for level 0
[ 3.650389] md: raid1 personality registered for level 1
[ 3.651385] async_tx: api initialized (async)
[ 3.717955] raid6: int64x1 3718 MB/s
[ 3.785829] raid6: int64x2 3944 MB/s
[ 3.853703] raid6: int64x4 3359 MB/s
[ 3.921586] raid6: int64x8 2644 MB/s
[ 3.989434] raid6: sse2x1 8455 MB/s
[ 4.057313] raid6: sse2x2 10331 MB/s
[ 4.125179] raid6: sse2x4 12054 MB/s
[ 4.125181] raid6: using algorithm sse2x4 (12054 MB/s)
[ 4.125978] md: raid6 personality registered for level 6
[ 4.125980] md: raid5 personality registered for level 5
[ 4.125981] md: raid4 personality registered for level 4
[ 4.128964] md: raid10 personality registered for level 10
[ 4.850226] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.095667] Adding 14020604k swap on /dev/sda5. Priority:-1 extents:1 across:14020604k
[ 13.098579] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.113052] udevd[493]: starting version 175
[ 13.146339] lp: driver loaded but no devices found
[ 13.200207] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 13.216650] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.216958] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.216964] mei 0000:00:16.0: setting latency timer to 64
[ 13.217022] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[ 13.226757] cfg80211: Calling CRDA to update world regulatory domain
[ 13.237472] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.237486] ath9k 0000:03:00.0: setting latency timer to 64
[ 13.240738] Linux video capture interface: v2.00
[ 13.241205] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c18)
[ 13.255804] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[ 13.255911] usbcore: registered new interface driver uvcvideo
[ 13.255913] USB Video Class driver (1.1.1)
[ 13.293685] device-mapper: multipath: version 1.3.0 loaded
[ 13.342609] type=1400 audit(1369414808.635:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=584 comm="apparmor_parser"
[ 13.342698] type=1400 audit(1369414808.635:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=724 comm="apparmor_parser"
[ 13.342880] type=1400 audit(1369414808.635:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=584 comm="apparmor_parser"
[ 13.343009] type=1400 audit(1369414808.635:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser"
[ 13.343036] type=1400 audit(1369414808.635:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser"
[ 13.343166] type=1400 audit(1369414808.635:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser"
[ 13.346984] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 13.346995] acer_wmi: Function bitmap for Communication Button: 0x1
[ 13.346998] acer_wmi: Brightness must be controlled by generic video driver
[ 13.355489] cfg80211: World regulatory domain updated:
[ 13.355491] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.355493] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.355494] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.355496] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.355497] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.355498] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.522116] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.522176] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 13.522207] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 13.672407] ath: EEPROM regdomain: 0x65
[ 13.672409] ath: EEPROM indicates we should expect a direct regpair map
[ 13.672410] ath: Country alpha2 being used: 00
[ 13.672411] ath: Regpair used: 0x65
[ 13.672413] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672415] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672416] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672417] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672419] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672420] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672421] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672423] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672424] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672425] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672426] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672428] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672429] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672430] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672431] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672433] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672434] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672435] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672436] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672438] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672439] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672442] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672443] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672444] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 13.672446] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 13.672447] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 13.675380] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 13.677097] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 13.677434] Registered led device: ath9k-phy0
[ 13.677441] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900058a0000, irq=17
[ 13.708181] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 13.708233] input: Acer WMI hotkeys as /devices/virtual/input/input8
[ 13.709559] acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0
[ 13.710981] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[ 13.861282] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.894888] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 13.895237] SGI XFS Quota Management subsystem
[ 13.965697] XFS (sda6): Mounting Filesystem
[ 14.064436] hda_codec: ALC269: SKU not ready 0x598301f0
[ 14.070623] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.070685] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.070761] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.070826] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.319479] XFS (sda6): Ending clean mount
[ 14.324901] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 14.399779] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 14.880362] init: failsafe main process (924) killed by TERM signal
[ 15.098073] Bluetooth: Core ver 2.16
[ 15.098089] NET: Registered protocol family 31
[ 15.098091] Bluetooth: HCI device and connection manager initialized
[ 15.098093] Bluetooth: HCI socket layer initialized
[ 15.098095] Bluetooth: L2CAP socket layer initialized
[ 15.098099] Bluetooth: SCO socket layer initialized
[ 15.100128] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.100131] Bluetooth: BNEP filters: protocol multicast
[ 15.118330] Bluetooth: RFCOMM TTY layer initialized
[ 15.118335] Bluetooth: RFCOMM socket layer initialized
[ 15.118336] Bluetooth: RFCOMM ver 1.11
[ 15.121222] type=1400 audit(1369414810.419:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1024 comm="apparmor_parser"
[ 15.121433] ppdev: user-space parallel port driver
[ 15.121651] type=1400 audit(1369414810.419:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1024 comm="apparmor_parser"
[ 15.121845] type=1400 audit(1369414810.419:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1024 comm="apparmor_parser"
[ 15.123866] type=1400 audit(1369414810.419:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1027 comm="apparmor_parser"
[ 15.147168] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 15.147172] tg3 0000:02:00.0: irq 45 for MSI/MSI-X
[ 15.147175] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[ 15.147178] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[ 15.147181] tg3 0000:02:00.0: irq 48 for MSI/MSI-X
[ 15.338125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.338872] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.382762] init: dmesg main process (1093) terminated with status 2
[ 15.391041] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.391368] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.047954] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 18.154670] wlan0: authenticate with 00:23:eb:27:14:e0 (try 1)
[ 18.156222] wlan0: authenticated
[ 18.182215] wlan0: associate with 00:23:eb:27:14:e0 (try 1)
[ 18.185490] wlan0: RX AssocResp from 00:23:eb:27:14:e0 (capab=0x421 status=0 aid=104)
[ 18.185493] wlan0: associated
[ 18.186078] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 18.186146] cfg80211: Calling CRDA for country: CH
[ 18.188578] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188580] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188582] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188583] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188584] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188586] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188587] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188588] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188590] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188591] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188592] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188594] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188595] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188596] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188597] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188599] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188600] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188601] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188602] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188604] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188605] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188606] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188608] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188609] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188610] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 18.188612] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 18.188613] cfg80211: Disabling freq 2484 MHz
[ 18.188615] cfg80211: Regulatory domain changed to country: CH
[ 18.188616] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.188618] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.188619] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.188620] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.188621] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 28.311731] wlan0: no IPv6 routers present
[ 38.370620] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 1612.006665] tg3 0000:02:00.0: PME# enabled
[ 1612.006674] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[ 1612.270618] wlan0: deauthenticating from 00:23:eb:27:14:e0 by local choice (reason=3)
[ 1612.346527] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1612.346537] cfg80211: Restoring regulatory settings
[ 1612.346548] cfg80211: Calling CRDA to update world regulatory domain
[ 1612.352771] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1612.352777] cfg80211: World regulatory domain updated:
[ 1612.352780] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1612.352784] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1612.352788] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1612.352791] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1612.352795] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1612.352798] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1614.334472] PM: Syncing filesystems ... done.
[ 1614.378175] PM: Preparing system for mem sleep
[ 1614.884083] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1614.899871] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1614.915855] PM: Entering mem sleep
[ 1614.915909] Suspending console(s) (use no_console_suspend to debug)
[ 1614.916263] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1614.916593] sd 0:0:0:0: [sda] Stopping disk
[ 1614.996173] sdhci-pci 0000:02:00.1: PCI INT B disabled
[ 1615.007642] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 1615.023594] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 1615.296905] PM: suspend of drv:sd dev:0:0:0:0 complete after 381.349 msecs
[ 1615.296948] PM: suspend of drv:scsi dev:target0:0:0 complete after 381.378 msecs
[ 1615.296978] PM: suspend of drv:scsi dev:host0 complete after 302.689 msecs
[ 1615.327029] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 332.589 msecs
[ 1615.355217] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 1615.370956] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 376.487 msecs
[ 1615.370997] PM: suspend of drv: dev:pci0000:00 complete after 375.176 msecs
[ 1615.371020] PM: suspend of devices complete after 455.882 msecs
[ 1615.371022] PM: suspend devices took 0.456 seconds
[ 1615.387264] ehci_hcd 0000:00:1d.0: PME# enabled
[ 1615.387304] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 1615.402940] ehci_hcd 0000:00:1a.0: PME# enabled
[ 1615.402977] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 1615.434868] PM: late suspend of devices complete after 63.960 msecs
[ 1615.435036] ACPI: Preparing to enter system sleep state S3
[ 1615.435542] PM: Saving platform NVS memory
[ 1615.438001] Disabling non-boot CPUs ...
[ 1615.439725] CPU 1 is now offline
[ 1615.542613] CPU 2 is now offline
[ 1615.646422] CPU 3 is now offline
[ 1615.647016] ACPI: Low-level resume complete
[ 1615.647061] PM: Restoring platform NVS memory
[ 1615.647494] Enabling non-boot CPUs ...
[ 1615.647599] Booting Node 0 Processor 1 APIC 0x1
[ 1615.647600] smpboot cpu 1: start_ip = 98000
[ 1615.675127] Calibrating delay loop (skipped) already calibrated this CPU
[ 1615.695710] NMI watchdog enabled, takes one hw-pmu counter.
[ 1615.695943] CPU1 is up
[ 1615.696009] Booting Node 0 Processor 2 APIC 0x2
[ 1615.696010] smpboot cpu 2: start_ip = 98000
[ 1615.707015] Calibrating delay loop (skipped) already calibrated this CPU
[ 1615.727641] NMI watchdog enabled, takes one hw-pmu counter.
[ 1615.727912] CPU2 is up
[ 1615.727979] Booting Node 0 Processor 3 APIC 0x3
[ 1615.727980] smpboot cpu 3: start_ip = 98000
[ 1615.738983] Calibrating delay loop (skipped) already calibrated this CPU
[ 1615.759834] NMI watchdog enabled, takes one hw-pmu counter.
[ 1615.760081] CPU3 is up
[ 1615.763384] ACPI: Waking up from system sleep state S3
[ 1615.765348] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 1615.765413] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[ 1615.765439] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 1615.765444] ehci_hcd 0000:00:1a.0: PME# disabled
[ 1615.765469] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 1615.765502] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xafb0afb0)
[ 1615.765545] pcieport 0000:00:1c.1: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[ 1615.765597] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[ 1615.765620] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 1615.765624] ehci_hcd 0000:00:1d.0: PME# disabled
[ 1615.765681] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 1615.765807] tg3 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 1615.765818] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffff800)
[ 1615.765923] sdhci-pci 0000:02:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 1615.766031] pci 0000:02:00.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 1615.766139] pci 0000:02:00.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 1615.766225] ath9k 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1615.766344] PM: early resume of devices complete after 1.041 msecs
[ 1615.766416] i915 0000:00:02.0: setting latency timer to 64
[ 1615.766446] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[ 1615.766487] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1615.766490] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1615.766493] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1615.766497] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 1615.766517] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1615.766524] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1615.766537] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 1615.766554] ahci 0000:00:1f.2: setting latency timer to 64
[ 1615.766571] tg3 0000:02:00.0: wake-up capability disabled by ACPI
[ 1615.766620] sdhci-pci 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1615.766623] tg3 0000:02:00.0: PME# disabled
[ 1615.766629] sdhci-pci 0000:02:00.1: setting latency timer to 64
[ 1615.778900] sd 0:0:0:0: [sda] Starting disk
[ 1615.895447] PM: resume of drv: dev:ep_00 complete after 124.411 msecs
[ 1615.895464] PM: resume of drv:usbhid dev:2-1.2:1.0 complete after 124.455 msecs
[ 1615.895501] PM: resume of drv: dev:ep_81 complete after 124.481 msecs
[ 1615.950581] PM: resume of drv:hub dev:1-1:1.0 complete after 179.864 msecs
[ 1615.950586] PM: resume of drv: dev:ep_00 complete after 179.843 msecs
[ 1615.950606] PM: resume of drv: dev:ep_81 complete after 179.881 msecs
[ 1616.022646] usb 1-1.3: reset high-speed USB device number 3 using ehci_hcd
[ 1616.066389] PM: resume of drv:battery dev:PNP0C0A:00 complete after 300.527 msecs
[ 1616.066491] legacy_resume(): pnp_bus_resume+0x0/0x70 returns -19
[ 1616.066494] PM: Device 00:01 failed to resume: error -19
[ 1616.106280] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1616.110273] ata3.00: configured for UDMA/133
[ 1616.162756] PM: resume of drv:i915 dev:0000:00:02.0 complete after 397.094 msecs
[ 1616.227334] PM: resume of drv:uvcvideo dev:1-1.3:1.1 complete after 456.983 msecs
[ 1616.227338] PM: resume of drv: dev:ep_00 complete after 456.973 msecs
[ 1616.227350] PM: resume of drv:uvcvideo dev:1-1.3:1.0 complete after 457.025 msecs
[ 1616.227363] PM: resume of drv: dev:ep_87 complete after 457.026 msecs
[ 1618.621551] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1618.625576] ata1.00: configured for UDMA/133
[ 1618.674308] PM: resume of drv:sd dev:0:0:0:0 complete after 2908.751 msecs
[ 1618.674333] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2607.685 msecs
[ 1618.674349] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2908.782 msecs
[ 1618.679316] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[ 1618.679332] PM: resume of devices complete after 2918.443 msecs
[ 1618.679395] PM: resume devices took 2.920 seconds
[ 1618.679443] PM: Finishing wakeup.
[ 1618.679444] Restarting tasks ... done.
[ 1618.761329] video LNXVIDEO:00: Restoring backlight state
[ 1619.353581] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1619.353586] tg3 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1619.353589] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[ 1619.353592] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[ 1619.353595] tg3 0000:02:00.0: irq 48 for MSI/MSI-X
[ 1619.925513] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1619.989158] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1622.753802] wlan0: authenticate with 00:23:eb:27:14:e0 (try 1)
[ 1622.755454] wlan0: authenticated
[ 1622.781626] wlan0: associate with 00:23:eb:27:14:e0 (try 1)
[ 1622.784533] wlan0: RX AssocResp from 00:23:eb:27:14:e0 (capab=0x421 status=0 aid=133)
[ 1622.784535] wlan0: associated
[ 1622.785099] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1622.785209] cfg80211: Calling CRDA for country: CH
[ 1622.789809] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789812] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789814] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789816] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789817] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789818] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789820] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789821] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789822] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789824] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789825] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789827] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789828] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789829] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789831] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789832] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789833] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789835] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789836] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789838] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789839] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789840] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789842] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789843] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789844] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1622.789846] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1622.789847] cfg80211: Disabling freq 2484 MHz
[ 1622.789850] cfg80211: Regulatory domain changed to country: CH
[ 1622.789851] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1622.789852] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1622.789854] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1622.789855] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1622.789856] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 1632.934544] wlan0: no IPv6 routers present
[ 1641.975355] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
asfree@asfree:~$

Ah ! Okay !

Bon, le problème n'est pas du tout grave, sauf qu'il arrive de manière inattendue et fait perdre une minute par semaine. ^^

De toute façon, je peux réinstaller Trisquel 6.0 quand je veux, où n'importe quelle distribution dont j'ai le DVD iso gravé.

Bon, j'ai remarqué une chose : les situations où arrive ce problème ont ceci de commun que j'utilise LibreOffice (texte ou tableau) en même temps que j'écoute un fichier audio avec Lecteur Vidéo.

C'est embêtant quand je fais de la saisie-audio (j'écoute un discours que je tape).

[Je peux utiliser longtemps Lecteur Vidéo avec d'autres logiciels ouverts en même temps, mais avec LibreOffice ça plante parfois.]

Il faudrait que j'essaie en utilisant gedit (au lieu de LibreOffice) et Lecteur Vidéo. Mais ça ne résoudrait pas le problème.

Comment faire pour que le problème ne survienne pas ?

En fait, non, le problème est arrivé même une fois où je n'utilisais que LibreOffice.

Bon, je viens de remplacer par la version LibreOffice 4.1 (récente, beta). Je n'ai pas encore eu le problème donc j'ai parlé dans mes messages précédents.

J'ai de nouveau l'ordinateur qui a bloqué pendant que je tapais un long message (perdu) sur un autre forum. Je n'utilisais pas LibreOffice.

Comme, au moment où il a bloqué, je ne me souvenais pas du Ctrl+alt+F1, j'ai appuyé sur le bouton d'allumage pour que l'ordinateur s'éteigne.

En redémarrant, j'ouvre ma session habituelle. J'essaie Ctrl+alt+F1, puis arrive dans un terminal, un terminal plein-écran cette fois-ci. Qu'y faire ? Comment en sortir pour revenir à l'interface graphique ? Comme je ne savais pas, j'ai de nouveau appuyé sur le bouton d'allumage.

J'ai ouvert un terminal (fenêtre) pour essayer la commande $ sudo service gdm restart

Un terminal (s'il s'agit bien d'un terminal) plein écran apparaît, qui dit : [J'ai du tout écrire à la main, puis retaper ici.]

_____

*Starting save kernel messages [OKJ]
*Starting CUPS printing spoder/server [OK]
*Starting DirMngr dirmngr [OK]
Starting jabber server: ejabberd.
Starting GNUstep distributed object mapper: gdomap
Starting GNUnet: gnunetd
(not starting - disbled in /etc/default/gvpe)
Starting minbif minbif [OK]
Starting Shibboleth 2 daemon: shibd
speech-dispatcher disabled ; edit /etc/default/speech-dispatcher
Raising maximum number of filedescriptors (ulimit -n) to 32768
Starting tor daemon: tor...
Sep 19 15:35:43.634 [notice] Initialized libevent version 2.0.16-stable using method epoll. Good.
Sep 19 15:35:43.634 [notice] Opening Socks listener on 127.0.0.1 : 9050
Sep 19 15:35:43.634 [notice] Opening Control listener on /var/num/tor/control
done.
*Starting bittorent daemon transmission-daemon [OK]
*Starting MD monitoring service mdadm --monitor [OK]
*Starting web server apache2
apache2 : Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for Server Name [OK]

_____

Et là, il ne fait plus rien. J'ai pu en sortir en faisant Ctrl+Alt+Del, et il a redémarré.

Est-ce que vous comprenez tout ce que je viens de copier ?
Est-ce que cela peut expliquer les blocages ?
Comment sortir d'un terminal plein écran pour revenir à l'interface graphique ?
Est-il possible de copier ce qui est dans un terminal plein écran puis le coller dans un fichier txt ou dans un message de forum ?
Est-il possible de récupérer le contenu d'un message (qu'on tapait sur un forum) lorsque l'ordinateur bloque ?
Est-il possible de débloquer l'ordinateur sans devoir le redémarrer (et perdre tout ce qu'on avait tapé) ?
Qu'est-ce que la touche Syst sur le clavier ?

1. Quand l'ordinateur fonctionne correctement, les combinaisons ctrl+alt+f1-f6 fonctionnent comme décrit (terminal plein écran). La combinaison ctrl+alt+f7 ne fait (apparemment) rien.

2. Quand je tape

asfreeas@asfreeas-Aspire-E1-571:~$ dmesg 'home/asfreeas/

dans le terminal, j'obtiens un > dans la ligne suivante et rien de nouveau n'apparaît dans le dossier asfreeas. Je suppose que j'ai fait une erreur de syntaxe dans la commande (pour créer le fichier logs). Idem quand je tape

asfreeas@asfreeas-Aspire-E1-571:~$ dmesg 'home/asfreeas/logs

Est-ce qu'un nouveau fichier nommé logs est censé se créer ? si oui, de quel type ? txt ? Si non, dois-je créer un fichier (de quel type ?) au préalable ?

3. Quand j'obtiens, dans le terminal, une ligne qui commence par > au lieu de ~$, qu'est-ce que cela signifie ? comment revenir à une ligne qui commence par ~$ (ou par asfreeas@asfreeas-Aspire-E1-571:~$) ?

3. Curieusement, tes liens pour le bateau islandais me mènent vers une page wikipedia qui indique ce message :

Mauvais titre

Le titre de la page demandée est invalide, vide, ou il s'agit d'un titre inter-langue ou inter-projet mal lié. Il contient peut-être un ou plusieurs caractères qui ne peuvent pas être utilisés dans les titres.

Revenir à la page Wikipédia:Accueil principal.

Mais j'ai trouvé la réponse sur cette page :

https://fr.wikipedia.org/wiki/Magic_SysRq_key

4. A chaque fois que l'ordinateur bloque et que j'écoute de l'audio en même temps, en plus du fait que je ne peux rien faire avec la souris (je n'ai pas encore essayé avec le clavier), il y a répétition d'une période sonore (de même pas une seconde). Si les paroles sont "Je veux chanter pour Linux.", je peux entendre "Je veux chanter pour Li-Li-Li-Li-Li-..." S'agit d'un simple plantage de pile graphique ? ou d'une "pile audio" ? ou de plantage total ?

5. Y a-t-il moyen de provoquer ce blocage qui m'arrive de manière inattendue ? histoire de tester les directives que tu m'as proposées sans devoir attendre le prochain blocage/plantage ? [Incroyable ! Je suis pressé que mon ordinateur bloque !]

6. Ou existe-t-il des moyens et précautions pour qu'un ordinateur ne plante pas ?

Déjà, les seuls logiciels que j'ai installées, je les ai installées à l'aide du gestionnaire de paquets synaptic, à l'exception :

- LibreOffice Version: 4.1.0.4 (version beta), que j'ai installé avec le paquet proposé sur le site officiel. Bon, maintenant, je viens de voir qu'il y a la 4.1.1, que je vais alors pouvoir substituer à la 4.1.0.4.

- ViewTube, installé à partir de GreaseMonkey.

Je ne branche pas mes disques durs externes à des ordinateurs qui ont des systèmes d'exploitation non libres (Windows, Mac).

Salut et bonsoir
J'ai un problème; les vidéos sur youtube ne s'affichent pas, il y a un écran noir avec un entête error.
Merci de votre aide.
Cordialement