The goal of this manual is to instruct the user on how to make a bootable USB drive with Trisquel installed.
- Open the Startup Disk Creator application
- Confirmation will display that the startup drive is complete.
Using dd for a direct copy (Other GNU/Linux distributions)
- $ sudo dd if=/path/to/image.iso of=/dev/sdX bs=8M;sync
Note that you want the device name (e.g. /dev/sdx) not the partition name (e.g. /dev/sdx1).
Revisions
07/10/2009 - 15:50
09/10/2009 - 13:26
02/16/2010 - 06:30
02/26/2012 - 08:37
03/05/2012 - 06:34
03/23/2012 - 14:27
04/11/2012 - 14:07
06/10/2013 - 21:58
08/13/2013 - 19:08
04/14/2014 - 04:23
08/25/2014 - 19:05
04/16/2015 - 17:05
06/06/2015 - 16:00
01/22/2016 - 04:17
01/12/2017 - 22:49
10/02/2017 - 13:10
08/06/2018 - 23:17
05/25/2021 - 20:26
02/17/2022 - 17:54
01/13/2024 - 16:43