Revision of Customizing a Trisquel iso from Sun, 09/01/2013 - 16:19

To customize a Trisquel .iso image, you must first download it and place it in an empty directory. Open a terminal and go to that directory, then follow these steps. Note that your architecture must be same as the target, i.e. you cannot customize a 64 bit iso from a 32 bit system (beyond editing the preseed file).

Unpacking

• Become root. All commands below will be run as root.

sudo su

• Create an empty directory and mount the iso on it, then extract the contents:

mkdir tmp
mount -o loop trisquel-original.iso tmp
mkdir src
rsync --exclude=/casper/filesystem.squashfs -a \
tmp/ src/
umount tmp

• Extract the squashed image files into casper/filesystem.squashfs:

mount src/casper/filesystem.squashfs \
tmp -t squashfs -o loop
mkdir jail
rsync -a tmp/ jail/
umount tmp

The Preseed File

Trisquel comes with a preseed file which allows preloading values into the debconf database. You can find the file at src/preseed/trisquel.seed. The file contains commented examples on the changes it can make, like changing the default locale, setting a static network configuration, or automagically installing an extra set of packages before the live-to disk install process (which you need internet access during the install to do).

Making Changes

Now you have the Trisquel system files in the jail directory, and you can start to apply changes.

First, we will backup some important files (Internet connection, data about mounted filesystems in the LiveCD and the repositories)

mkdir orig
cp -a {edit,orig}/etc/hosts
cp -a {edit,orig}/etc/resolv.conf

cp -a {edit,orig}/etc/mtab

tar cf orig/etc-apt-conf.tar -C edit/etc apt

Also the start-up scripts:

SCRIPTS="sbin/start-stop-daemon usr/sbin/invoke-rc.d usr/sbin/service"
for i in $SCRIPTS
do
mv "$CHROOT/$i" "$CHROOT/$i.REAL"
cat <<EOF > "$CHROOT/$i"
#!/bin/sh
echo
echo "Warning: Fake /$i called, doing nothing"
EOF
chmod 755 "$CHROOT/$i"
done

cat <<EOF > "$CHROOT/usr/sbin/start"
#!/bin/sh
echo
echo "Warning: Fake start called, doing nothing"
EOF

cat <<EOF > "$CHROOT/usr/sbin/stop"
#!/bin/sh
echo
echo "Warning: Fake start called, doing nothing"
EOF
chmod 755 $CHROOT/usr/sbin/start $CHROOT/usr/sbin/stop

• This is optional (copy your currently available packages to the new system and make a list of the packages that you have installed in your system):

rsync /var/cache/apt/archives/*.deb /edit/var/cache/apt/archives
aptitude search --disable-columns -F '%p=%V %M' '~i' > \
 installed.list
aptitude search --disable-columns -F '%p=%V %M' '~M' > \
 automatically-installed.list
aptitude search --disable-columns -F '%p=%V %M' '~i !~M' > \
 manually-installed.list
aptitude search --disable-columns -F '%p=%V %c' '!~i !~v' > \
 purged.list

You need to mount some parts of your current system to work and install packages:

mount -t proc none jail/proc
mount -t devpts none jail/dev/pts
mount -t sysfs none jail/sys

To install or remove packages, you need to enter the jail using chroot:

cp /etc/resolv.conf jail/etc
chroot jail

The first command allows you to have network access. The second command puts you "inside" your new system.

You can now start doing the changes that you need. First update aptitude:

aptitude update
aptitude install 0

• This is optional (update the hardware information from an Internet database):

update-pciids
update-usbids

Cleaning up and setting your computer back to normal

You need to undo some of the changes that you have made to set your computer to work nicely when you are done. First, re-enable services within the system that you just created:

dpkg-divert --rename --remove /sbin/initctl
SCRIPTS="sbin/start-stop-daemon usr/sbin/invoke-rc.d usr/sbin/service"
for i in $SCRIPTS
do
mv "/$i.REAL" "/$i"
done
rm -f /usr/sbin/start
rm -f /usr/sbin/stop

Then, detach the created system from your actual computer

exit
umount -fl jail/dev/pts
umount -fl jail/dev
umount -fl jail/sys
umount -fl jail/proc

• This is optional (update gconf and kernel):

chroot jail update-gconf-defaults
chroot jail update-initramfs -u

It is better if you remove the packages that you downloaded to make your ISO smaller and the compression faster

chroot jail apt-get clean
chroot jail apt-get autoclean

You can also remove some useless files

find jail |grep [.-]old$ | xargs -r rm -v
find jail |grep [.-]bak$ | xargs -r rm -v

for dir in jail/var/lib/update-notifier/user.d/ jail/var/lib/apt-xapian-index/
do
 [ -d $dir ] || continue
 find $dir -type f |xargs -r rm
done

rm -rf jail/tmp/*

You should now put the default Internet configuration and the table of mounted devices as they were in the LiveCD:

rm -f jail/etc/hosts jail/etc/resolv.conf jail/etc/mtab \
jail/root/.bash_history jail/root/.Xauthority \
jail/etc/resolvconf/resolv.conf.d/original \
jail/etc/resolvconf/resolv.conf.d/tail

rm -v jail/usr/lib/locale/locale-archive

cp -a orig/etc-hosts jail/etc/hosts
cp -a orig/etc-resolv.conf jail/etc/resolv.conf
cp -a orig/etc-mtab jail/etc/mtab

If you replaced the kernel or the boot scripts, copy the new kernel binary and initrd image as needed:

KERNEL="$(chroot jail echo `uname -r`)"
cp "jail/boot/vmlinuz-$KERNEL" \
src/casper/vmlinuz
cp "jail/boot/initrd.img-$KERNEL" \
src/casper/initrd

cp jail/boot/vmlinuz-custom src/isolinux/vmlinuz
cp jail/boot/initrd.img-custom src/isolinux/initrd

Repacking

After your modifications are done, you will need to rebuild the squashfs and .iso images. Install squashfs-tools:

apt-get install squashfs-tools genisoimage

• Update the list of packages and remove the old squashfs

chroot jail dpkg-query -W --showformat='${Package} ${Version}\n' > \
./filesystem.manifest
mv -f ./filesystem.manifest src/casper/filesystem.manifest

rm src/casper/filesystem.squashfs

To compress your new system into the squashfs file, you have four options:

1. Normal version (this will work with most BIOS)

mksquashfs jail src/casper/filesystem.squashfs

2. Compact (using a bigger block size), but slower to compress

mksquashfs jail src/casper/filesystem.squashfs -b 104857

3. More compact (with xz compressor) and slower to compress

mksquashfs jail src/casper/filesystem.squashfs -comp xz

4. Really compact (using a bigger block size and xz compressor) and even slower to compress

mksquashfs jail src/casper/filesystem.squashfs -b 104857 -comp xz

For Trisquel 2.0 to 3.0 add -nolzma. This option was removed in Trisquel Awen 3.5. The option was to "use ZLIB compression method instead of LZMA", but ZLIB is now the default as shown in the man-pages.

• Update the information of the integrity of the files:

chmod 644 src/casper/filesystem.squashfs
printf $(sudo du -sx --block-size=1 jail | cut -f1) > \
src/casper/filesystem.size
nano src/README.TXT #if you want to edit your distribution README
rm src/md5sum.txt
cd src
find . -type f -print0 | xargs -0 md5sum > md5sum.txt

• Finally, create a new .iso image (notice the dot at the end of the last line):

mkisofs -D -r -V "My Trisquel modified version" -cache-inodes \
-J -l -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot \
-boot-load-size 4 -boot-info-table -o ../trisquel-modified.iso .

... and prepare the iso to be bootable by removable media other than CD:

cd ..
isohybrid trisquel-modified.iso

If you want, you can also create a md5sum of your file:

md5sum "$outfile" > "$outfile".md5

Optional test

Install qemu

aptitude install qemu

• For a 64-bit system:

qemu-system-x86_64 -boot d -cdrom trisquel-modified.iso -m 512

• For a i386 (486 and 586) system:

qemu-system-i386 -boot d -cdrom trisquel-modified.iso -m 512

If it runs well, congratulations, you are done! If it doesn't, review your steps or get in touch. To actually make a bootable CD or USB use Xfburn or the USB-installer (usb-creator-gtk.)

Please make clear to anyone you distribute your version to that it is not an official Trisquel .iso image. If any non-free software is included, please rename your project and do not use our logo.

In the making of this manual, some information was taken from d2 (david /at/ decotigny point fr, http://david.decotigny.fr/wiki/wakka.php?wiki=RemasterUbuntu) and http://devel.trisquel.info/makeiso/makeiso.sh

Attachment	Size
remaster_trisquel.sh	17.89 KB