Submitted by MagicFab on Sat, 01/12/2013 - 16:21
Revision of Optimizing battery time from Thu, 01/17/2013 - 10:50
The revisions let you track differences between multiple versions of a post.
The following information can be used with a new Trisquel installation or while using your system to try and optimize battery time. This is mostly useful on laptops.
Tips & tricks
- Suspend the system when not using it;
- Disable every device that won't be used in the BIOS: Bluetooth, WiMAX, Wireless WAN (3G), touchpad (~2W total savings), and specially wake-on-lan which keeps the LAN port active (1W savings);
- Check your power usage statistics with the gnome-power-statistics command
- Set an automatic decrease of the luminosity after some time of inactivity;
- Deactivate the Bluetooth/Wifi when not using it (for a long time). This can sometimes be achieved through a hardware switch;
- Replacing a hard drive by a solid state one should improve battery life as it requires less power;
- Disabling the sound card: this will save around 2W (up to 5% battery life):
- Right-click on the speaker in the task bar and choose "Sound preferences"
- In the "Hardware" tab, click on your sound card, then select the profile "Off"
Useful Packages
- linux-libre (homepage): Upgrade your kernel to latest linux-libre. There are two PPAs making this available (based on a forum discussion about both):
- laptop-mode-tools (homepage) : Tools for Power Savings based on battery/AC status
Laptop mode is automatically enabled after installing this package. Check the ArchLinux extensive documentation about this. - powertop (homepage) - tool to find out what is using power on a laptop
- rovclock - utility to control frequency rates of your Radeon card
Check the Thinkwiki rovclock documentation about this package
Blacklist kernel modules
Do you never or seldomly use things like bluetooth, sd card reader, joystick, parallel port? Disable the kernel modules by adding to /etc/modprobe.d/blacklist.confblacklist bluetooth blacklist firewire_core blacklist firewire_ohci blacklist yenta_socket blacklist joydev blacklist sdhci true blacklist sdhci_pci true blacklist dm_crypt blacklist tifm_7xx1 blacklist shpchp blacklist lp blacklist btrfs blacklist parport2And then run
sudo update-initramfs -u
and restart. You can find out what modules are loaded using the lsmod
command. If you want a very terse info about a module, you can sudo modinfo modulename
. These modules might get automatically loaded when actually needed or if not, you can sudo modprobe modulename
to insert.
Remove excess VTs
Do you use virtual terminals 3-6? I don't so I got rid of them by removing /etc/init/tty3.conf ... /etc/init/tty6.conf and rebooted.Runtime PM
When you run powertop you might notice many devices have runtime power management disabled. You can enable them all by echoing auto to them as super user, e.g. in a startup script. You can find a list of such devices withls /sys/bus/{pci,i2c}/devices/*/power/control
Radeon power management
Read the manual page,man radeon
. For example to enable Dynamic Clock Gating and Power Management, enter into /etc/X11/xorg.conf (does not exist by default): Section "Device" Identifier "Configured Video Device" Driver "radeon" Option "ClockGating" "true" Option "DynamicPM" "true" EndSectionsave and reboot, now
grep -i dyn /var/log/Xorg.0.log
should produce[ 17.806] (II) RADEON(0): Dynamic Clock Gating Enabled
[ 17.806] (II) RADEON(0): Dynamic Power Management Enabled
References and useful links
Revisions
01/12/2013 - 16:21
01/13/2013 - 16:43
01/15/2013 - 05:39
01/17/2013 - 10:50
08/13/2013 - 17:54
10/26/2013 - 23:00
11/11/2013 - 01:46
08/02/2014 - 01:53
06/06/2018 - 12:57