Error while trying to update trisquel 7 to trisquel 8 : Could not calculate the upgrade

25 respuestas [Último envío]
lynn
Desconectado/a
se unió: 02/10/2016

Hi

I try to update from trisquel 7 to trisquel 8.
Here is error: Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade.

This can be caused by:
* Upgrading to a pre-release version of Trisquel
* Running the current pre-release version of Trisquel
* Unofficial software packages not provided by Trisquel

If none of this applies, then please report this bug using the command https://trisquel.info/en/project/issues in a browser..

Could you help me to resolve it?

Thank you very much

jxself
Desconectado/a
se unió: 09/13/2010

Well, it would be helpful to provide the entire output of the package manager and not just the ending message because that should show the *real* error. But also, Trisquel 7 is no longer supported so it may be necessary to reinstall.

lynn
Desconectado/a
se unió: 02/10/2016

Hi How could I get the entire output of the package manager? I use software updater button to update.? any idea

thank you

dctrud

I am a member!

Desconectado/a
se unió: 09/06/2019

Hi Lynn,

Take a look in the file `/etc/apt/sources.list`...

If it already says 'flidas' on each line then try running `apt-get update && apt-get dist-upgrade` in a terminal to see full error messages.

If it still says `belenos` on each line then try running `do-release-upgrade` in a terminal to see full error messages.

lynn
Desconectado/a
se unió: 02/10/2016

No flidas in source.list... So I used do-release-upgrade command.. and I obtained same error.
Calculating the changes

Calculating the changes

Could not calculate the upgrade

An unresolvable problem occurred while calculating the upgrade.

This can be caused by:
* Upgrading to a pre-release version of Trisquel
* Running the current pre-release version of Trisquel
* Unofficial software packages not provided by Trisquel

If none of this applies, then please report this bug using the
command https://trisquel.info/en/project/issues in a browser..

I got this error message too and I replied YES to question.
Updating repository information

No valid mirror found

While scanning your repository information no mirror entry for the
upgrade was found. This can happen if you run an internal mirror or
if the mirror information is out of date.

Do you want to rewrite your 'sources.list' file anyway? If you choose
'Yes' here it will update all 'belenos' to 'flidas' entries.
If you select 'No' the upgrade will cancel.

Thank you

dctrud

I am a member!

Desconectado/a
se unió: 09/06/2019

I'm afraid I don't have much to add. I haven't ever actually done the upgrade from 7->8.

The only thing further I might suggest is to say 'Yes' to the flidas entries, then run `apt-get update` followed by `apt-get dist-upgrade` and see if that gives some more output.

You would then need to change the `flidas` back to `belenos` in `/etc/apt/sources.list` if you need to grab any other belenos packages in future, though.

Magic Banana

I am a member!

I am a translator!

Desconectado/a
se unió: 07/24/2010

If you installed PPAs, try 'ppa-purge' (in Trisquel's repository) before attempting again the upgrade to Trisquel 8.

lynn
Desconectado/a
se unió: 02/10/2016

Hi I still have issue to update to trisquel with same error.

Here error I got:
Preparing to unpack .../base-files_1%3a9.4ubuntu4.2+8.0trisquel1_amd64.deb ...
Unpacking base-files (1:9.4ubuntu4.2+8.0trisquel1) over (1:7.2ubuntu5+7.0trisquel3) ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
W: Unknown Multi-Arch type 'no' for package 'kwin'
W: Unknown Multi-Arch type 'no' for package 'kwin-dev'
W: Unknown Multi-Arch type 'no' for package 'kwin-wayland'
W: Unknown Multi-Arch type 'no' for package 'kwin-x11'
W: Unknown Multi-Arch type 'no' for package 'libkf5sysguard-dev'
W: Unknown Multi-Arch type 'no' for package 'libxapian-dev'
W: Ignoring Provides line with DepCompareOp for package php-psr-http-message-implementation
W: Ignoring Provides line with DepCompareOp for package php-psr-log-implementation
W: Ignoring Provides line with DepCompareOp for package php-seclib
W: Ignoring Provides line with DepCompareOp for package php-sabre-http
W: Ignoring Provides line with DepCompareOp for package php-math-biginteger
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Unknown Multi-Arch type 'no' for package 'kwin-dev'
W: Unknown Multi-Arch type 'no' for package 'kwin-wayland'
W: Unknown Multi-Arch type 'no' for package 'kwin-x11'
W: Unknown Multi-Arch type 'no' for package 'libkf5sysguard-dev'
W: Unknown Multi-Arch type 'no' for package 'libxapian-dev'
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Ignoring Provides line with DepCompareOp for package php-math-biginteger
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package xserver-xorg
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package xserver-xorg
W: You may want to run apt-get update to correct these problems
E: Sub-process /usr/bin/dpkg returned an error code (2)

and this error:
Preparing to unpack .../base-files_1%3a9.4ubuntu4.2+8.0trisquel1_amd64.deb ...
Unpacking base-files (1:9.4ubuntu4.2+8.0trisquel1) over (1:7.2ubuntu5+7.0trisquel3) ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
W: Unknown Multi-Arch type 'no' for package 'kwin'
W: Unknown Multi-Arch type 'no' for package 'kwin-dev'
W: Unknown Multi-Arch type 'no' for package 'kwin-wayland'
W: Unknown Multi-Arch type 'no' for package 'kwin-x11'
W: Unknown Multi-Arch type 'no' for package 'libkf5sysguard-dev'
W: Unknown Multi-Arch type 'no' for package 'libxapian-dev'
W: Ignoring Provides line with DepCompareOp for package php-psr-http-message-implementation
W: Ignoring Provides line with DepCompareOp for package php-psr-log-implementation
W: Ignoring Provides line with DepCompareOp for package php-seclib
W: Ignoring Provides line with DepCompareOp for package php-sabre-http
W: Ignoring Provides line with DepCompareOp for package php-math-biginteger
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Unknown Multi-Arch type 'no' for package 'kwin-dev'
W: Unknown Multi-Arch type 'no' for package 'kwin-wayland'
W: Unknown Multi-Arch type 'no' for package 'kwin-x11'
W: Unknown Multi-Arch type 'no' for package 'libkf5sysguard-dev'
W: Unknown Multi-Arch type 'no' for package 'libxapian-dev'
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Ignoring Provides line with DepCompareOp for package php-math-biginteger
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package xserver-xorg
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package xserver-xorg
W: You may want to run apt-get update to correct these problems
E: Sub-process /usr/bin/dpkg returned an error code (2)
me
Could you guide me to resolve the issues? and complete update of trisquel 7 to trisquel 8??

Thank you

lynn
Desconectado/a
se unió: 02/10/2016

Hi im still getting follow error with apt-get update ..
W: Unknown Multi-Arch type 'no' for package 'kwin'
W: Unknown Multi-Arch type 'no' for package 'kwin-dev'
W: Unknown Multi-Arch type 'no' for package 'kwin-wayland'
W: Unknown Multi-Arch type 'no' for package 'kwin-x11'
W: Unknown Multi-Arch type 'no' for package 'libkf5sysguard-dev'
W: Unknown Multi-Arch type 'no' for package 'libxapian-dev'
W: Ignoring Provides line with DepCompareOp for package php-psr-http-message-implementation
W: Ignoring Provides line with DepCompareOp for package php-psr-log-implementation
W: Ignoring Provides line with DepCompareOp for package php-seclib
W: Ignoring Provides line with DepCompareOp for package php-sabre-http
W: Ignoring Provides line with DepCompareOp for package php-math-biginteger
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Unknown Multi-Arch type 'no' for package 'kwin-dev'
W: Unknown Multi-Arch type 'no' for package 'kwin-wayland'
W: Unknown Multi-Arch type 'no' for package 'kwin-x11'
W: Unknown Multi-Arch type 'no' for package 'libkf5sysguard-dev'
W: Unknown Multi-Arch type 'no' for package 'libxapian-dev'
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Ignoring Provides line with DepCompareOp for package php-math-biginteger
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package xserver-xorg
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package xserver-xorg
W: You may want to run apt-get update to correct these problems

TY for your help

Magic Banana

I am a member!

I am a translator!

Desconectado/a
se unió: 07/24/2010

W: You may want to run apt-get update to correct these problems

Have you done that?

calher

I am a member!

Desconectado/a
se unió: 06/19/2015

Wow, are you just now upgrading?

lynn
Desconectado/a
se unió: 02/10/2016

Yes Its the command i done *apt-get update* just before I get this error message...

My objective to fully upgrade to trisquel. but I tried to complete apt-get update command without error..and try again to install...
Thank you

Narcis Garcia
Desconectado/a
se unió: 04/15/2019

What error? I don't see anything below your message.

El 29/9/19 a les 13:07, name at domain ha escrit:
> Yes Its the command i done *apt-get update* just before I get this error
> message...
>
> My objective to fully upgrade to trisquel. but I tried to  complete
> apt-get update command without error..and try again to install...
> Thank you
>

lynn
Desconectado/a
se unió: 02/10/2016

Error is this when I try to use apt-get update:

W: Unknown Multi-Arch type 'no' for package 'kwin'
W: Unknown Multi-Arch type 'no' for package 'kwin-dev'
W: Unknown Multi-Arch type 'no' for package 'kwin-wayland'
W: Unknown Multi-Arch type 'no' for package 'kwin-x11'
W: Unknown Multi-Arch type 'no' for package 'libkf5sysguard-dev'
W: Unknown Multi-Arch type 'no' for package 'libxapian-dev'
W: Ignoring Provides line with DepCompareOp for package php-psr-http-message-implementation
W: Ignoring Provides line with DepCompareOp for package php-psr-log-implementation
W: Ignoring Provides line with DepCompareOp for package php-seclib
W: Ignoring Provides line with DepCompareOp for package php-sabre-http
W: Ignoring Provides line with DepCompareOp for package php-math-biginteger
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Unknown Multi-Arch type 'no' for package 'kwin-dev'
W: Unknown Multi-Arch type 'no' for package 'kwin-wayland'
W: Unknown Multi-Arch type 'no' for package 'kwin-x11'
W: Unknown Multi-Arch type 'no' for package 'libkf5sysguard-dev'
W: Unknown Multi-Arch type 'no' for package 'libxapian-dev'
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Ignoring Provides line with DepCompareOp for package php-math-biginteger
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package xserver-xorg
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Ignoring Provides line with DepCompareOp for package pypy-cffi
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package pypy-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package xserver-xorg
W: You may want to run apt-get update to correct these problems

TY

chaosmonk

I am a member!

I am a translator!

Desconectado/a
se unió: 07/07/2017

Try

$ sudo apt install -f

lynn
Desconectado/a
se unió: 02/10/2016

Hi I did sudo apt install -f .. it worked without error.. after I tried to redo apt-get update...and same error was still there
Thank you

chaosmonk

I am a member!

I am a translator!

Desconectado/a
se unió: 07/07/2017

> Hi I did sudo apt install -f .. it worked without
> error.. after I tried to redo apt-get update...and same
> error was still there

Try

$ sudo apt install --only-upgrade apt

(based on
https://askubuntu.com/questions/760071/errors-upgrading-from-14-04-to-16-04-about-unknown-multi-arch-type-for-compiz-l)

lynn
Desconectado/a
se unió: 02/10/2016

Hi I completed this installation with the command you provided ,thank you.. I need to reboot to see if all goes well.
After I completed, a message appeared that root partition has only 900 megabytes free space... Can you tell me if I could resize root partition? If yes which command I should use and how many GB you would suggest for this partition.

Narcis Garcia
Desconectado/a
se unió: 04/15/2019

I remember to have used gnome-disks in Ubuntu to resize mounted root
partition (live), but I don't remember which Ubuntu version was.

El 2/10/19 a les 13:05, name at domain ha escrit:
> Hi I completed this installation with the command you provided ,thank
> you.. I need to reboot to see  if all goes well.
> After I completed,  a message appeared that root partition has only 900
> megabytes free space...  Can you tell me if I could resize root
> partition? If yes which command I should use and how many GB you would
> suggest for this partition.
>

lynn
Desconectado/a
se unió: 02/10/2016

I rebooted and i got error . I cannot boot s so i use livecd to boot.i try to access e encrypted partition. IT asks passphrase. I entered passphrase and i see main user folder but i get error the folder contents could not be displayed. You do not have the permissions necessary to view the contents
What i should Do? Ty

chaosmonk

I am a member!

I am a translator!

Desconectado/a
se unió: 07/07/2017

> I entered passphrase and i see main user folder but i get error the
> folder contents could not be displayed. You do not have the
> permissions necessary to view the contents

You might need to be root. Try right-clicking the folder and selecting
"Open as administrator".

lynn
Desconectado/a
se unió: 02/10/2016

I did this . And i dont see content or folder . I see readme file. With msg this directory has been unmounted to protect your data ...how could i resolve this ? ty

Magic Banana

I am a member!

I am a translator!

Desconectado/a
se unió: 07/24/2010

Try to execute in a terminal:
$ ecryptfs-mount-private

lynn
Desconectado/a
se unió: 02/10/2016

Hi i tried with command you provided and i got command not Found error. Ty

elc79
Desconectado/a
se unió: 03/06/2017

It's very useful to have home partition with Debian based distros because the upgrade process it's a nightmare, so if you have home partition you don't need to upgrade your system, you can make a clean install preserving home partition and you will not lose any of your stuff in home partition.

lynn
Desconectado/a
se unió: 02/10/2016

Hi
When i sudo chroot /mnt i can not ping any domain on internet. So i get error unable to resolve host trisquel with Apt update ty