Trisquel Seven!!!
- Vous devez vous identifier ou créer un compte pour écrire des commentaires
Our fearless Rubén is giving a talk at the OpenEdJAM conference in San Antonio Texas this weekend starting Saturday, July 26, 2014 at 20:45 UTC/GMT
http://openedjam.org/sessions/trisquel-70-release-reintroducing-trisquel-edu
You can use this link to convert that date/time to your local time zone:
http://www.timeanddate.com/worldclock/fixedtime.html?msg=Rub%C3%A9n%27s+Talk&iso=20140726T2045&am=45
Those interested in finally getting an answer to the question of "When will Trisquel 7 be released" should tune in and pay attention!!!
I understand that a live stream is supposed to be available but their website doesn't seem to have details just yet.
And here's an easy countdown timer to the event:
http://www.timeanddate.com/countdown/generic?p0=1440&iso=20140726T2045&msg=Rub%C3%A9n%27s%20Talk
I shall be watching!
Thanks!
thx!
After your great job, it seems we can already try Trisquel 7.0.
As somebody who starts from running Debootstrap, for me a release happens when the repos are up.
And the repos have been up, alive, and kicking for months now :)
It's still being worked on, even in the airport on the way to the talk, and is not the final released version.
I'm trying to generate some buzz here people but whatever, detractors.
What detractors? (Hopefully you weren't referring to me!)
The livestream will happen at http://www.openedjam.org/livestream
Woot!
Thanks!
Woot!
Will it use Systemd?
From a speed perspective I think it should.
It will use the same thing Ubuntu 14.04 uses, which I'm pretty sure is Upstart still. Ubuntu's plan is to migrate to systemd, though, so I guess Ubuntu 16.04, and therefore Trisquel 8, will probably use it.
Never mind, I thought Systemd was in Trusty's default repos - from the looks of it, it actually isn't. My bad.
So 2 years it officially is before I can do a systemd-nspawn again! :)
I am a member!
Could one please point out what that triskel thing is about? Is it a version based on KDE?
triskel is just a metapackage that will install a minimally functional KDE on top of your Trisquel install. Unfortunately, there is no triskel iso. I think that a netinstall with triskel + kde-full + kde-standard is the only way to get a pure and complete KDE Trisquel install.
I am a member!
The suggestion, below, should work; same goes for any other de (Mate,
XFCE, pure GNOME, whatever). Maybe, get a basic net install (no de)
working, first?
On 07/24/2014 12:56 PM, mtlben wrote:
> Unfortunately, there is no triskel iso. I think that a netinstall with
> triskel + kde-full + kde-standard is the only way to get a pure and
> complete KDE Trisquel install.
I am a member!
Fourtounately, there is a triskel 7 iso and hopefully will also be a image with the final release.
http://devel.trisquel.info/makeiso/iso/
--
Teodorescu Petre
trisquel.info | ceata.org | fsf.org | eff.org | riseup.net | airvpn.org | torproject.org | flattr.com |
I will be watching too! I've been using Trisquel 7 since March and I'm quite happy with it. I've been using it for the building and development of libreCMC.
"I've been using it for the building and development of libreCMC." - Way cool man, way cool! (=
Good luck with that, I will be one of your first testers. Since I am stuck with this s*it.. (see attachment).
Neither I tried admission into https://www.turris.cz/en/ project nor am I able to grab a https://openwireless.org/ compatible box.
I'm glad that you have an interest in libreCMC. Sadly, we can't support any ADSL+ modems / routers due to the non-free firmware that they need.
In regards to the OpenWireless project, there are some talks with the libreCMC project where we may include some components that they use. Sadly, their current images have non-free parts, but I am quite supportive of the idea of giving free wifi access to people.
If you want a router with libreCMC, ThinkPenguin will soon be selling one that will include libreCMC along with a nice source code CD (includes libreCMC + u-boot bootloader).
Thank you for the info. Yup, Chris had a separate thread on libreCMC before..
I am a member!
I'm looking forward to hearing the news!
I've been anticipating 7 for some time, especially with news of a newer version of Pitivi in the mix.
Some video editors using MLT: http://www.mltframework.org/bin/view/MLT/Projects
See flowblade: https://code.google.com/p/flowblade/ and Shotcut: http://www.shotcutapp.com/
Due to an unstable network connection at the site Rubén's talk will not be streamed live. A recording will be provided later.
Thanks! Hope the best for him and the Trisquel community!
Hi, I could only get this photo from a twitter user. Looks like Trisquel 7 is ready.
Looking good!
I'm still having problems on Aqemu but about to reboot the lappy to a live USB stick; can I just hit the "install" button now if all goes well or will there be a different .iso for the official release?
I am a member!
There will be a new .iso for the 7.0 official release; if you install
one of the pre-releases, and regularly do upgrades, you'll have the new
Trisquel 7.
I am a member!
I'm on Trisquel 6, and I just want to make sure I understand this correctly.
So, if I install a pre-release, then when 7.0 is officially released I can upgrade from within my pre-release install? That is, instead of a installing from another new ISO? Is that correct?
And also, is the following link to pre-releases?
http://devel.trisquel.info/makeiso/iso/
I am a member!
When 7 is officially out, you can upgrade your prerelease, and you'll
have 7. The link to the development iso is:
I am a member!
OK, thanks! So I have another question too—I'm still a bit new with this.
Some time ago, I managed to install Trisquel 6.0 on my Macbook Air, dual boot, via reEFit.
Similarly, I'd like to install a pre-release of Trisquel on an older MacBook Pro, i.e., MacBookPro5,1 with a 2.66 Intel Core 2 Duo.
Which version of the pre-release should I install?
I would say you should go with the latest release - the 29th of June release.
It works fine on a Core 2 Quad PC and the i5 MacBook that I'm posting this from (in shame I must admit). Not sure about dual booting mind you since I simply demolished the OSX partition to get it on here. I would assume that it will work fine.
I am a member!
Jabjabs, OK. Cool, thanks!
So, because I'm still a rookie at this, I have another question; should I go with the 944M "triskel_7.0-20140629_i686.iso" version? I'm assuming that the "i" signifies "Intel."
Also, I understand the Apple shame. I remember being mocked when having an Apple in public. Boy have times changed. Now I shame Apple with two strips of Duct tape—it marks an "X" over their glowing icon.
Also, both my "DuctBooks" are used. While they may not be fully FREE, they serve as great transitional computers. Plus, a used computer is way better for the environment. Come to think of it, there are so many Apples out their...perhaps there should be a movement for modifying the hardware, e.g., building FREE from the recycled.
i686 means 32 bit, amd64 means 64 bit (both can be used on Intel, AMD and others)
I covered mine up with a Copyleft sticker :P There is a whole variety of FSF/EFF stickers as well. A lot of people are somewhat shocked to see Joni Ives monolithic creation covered in these thing.
hello friends comunity trisquel,i have a load trisquel pre release 7.0 on asus x54c with i3 processor quad core 2.4 ghz and hard disk 320 gb. Trisquel 7 work perfect and all hardware asus x54c is ok ( athereos wi-fi, grafich card hd 3000 etc etc)
best regards
gennaro
Glad to hear that!
Stay free gennaro!
surely I will insert in h-node, hi
gennaro
my asus x54c work perfect 100 % trisquel 7
gennarogiugliano@debian:~$ su
Password:
root@debian:/home/gennarogiugliano# lspci -vmmnn
Slot: 00:00.0
Class: Host bridge [0600]
Vendor: Intel Corporation [8086]
Device: 2nd Generation Core Processor Family DRAM Controller [0104]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 09
Slot: 00:02.0
Class: VGA compatible controller [0300]
Vendor: Intel Corporation [8086]
Device: 2nd Generation Core Processor Family Integrated Graphics Controller [0116]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 09
Slot: 00:16.0
Class: Communication controller [0780]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family MEI Controller #1 [1c3a]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 04
Slot: 00:1a.0
Class: USB controller [0c03]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [1c2d]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 05
ProgIf: 20
Slot: 00:1b.0
Class: Audio device [0403]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family High Definition Audio Controller [1c20]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 05
Slot: 00:1c.0
Class: PCI bridge [0604]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [1c10]
Rev: b5
Slot: 00:1c.1
Class: PCI bridge [0604]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [1c12]
Rev: b5
Slot: 00:1c.3
Class: PCI bridge [0604]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [1c16]
Rev: b5
Slot: 00:1c.5
Class: PCI bridge [0604]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [1c1a]
Rev: b5
Slot: 00:1d.0
Class: USB controller [0c03]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [1c26]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 05
ProgIf: 20
Slot: 00:1f.0
Class: ISA bridge [0601]
Vendor: Intel Corporation [8086]
Device: HM65 Express Chipset Family LPC Controller [1c49]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 05
Slot: 00:1f.2
Class: SATA controller [0106]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [1c03]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 05
ProgIf: 01
Slot: 00:1f.3
Class: SMBus [0c05]
Vendor: Intel Corporation [8086]
Device: 6 Series/C200 Series Chipset Family SMBus Controller [1c22]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: 05
Slot: 02:00.0
Class: Network controller [0280]
Vendor: Atheros Communications Inc. [168c]
Device: AR9285 Wireless Network Adapter (PCI-Express) [002b]
SVendor: Foxconn International, Inc. [105b]
SDevice: Device [e049]
Rev: 01
Slot: 03:00.0
Class: USB controller [0c03]
Vendor: ASMedia Technology Inc. [1b21]
Device: ASM1042 SuperSpeed USB Host Controller [1042]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [1059]
ProgIf: 30
Slot: 04:00.0
Class: Ethernet controller [0200]
Vendor: Atheros Communications Inc. [1969]
Device: AR8151 v2.0 Gigabit Ethernet [1083]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [13c7]
Rev: c0
root@debian:/home/gennarogiugliano#
El 04/08/14 a las 04:10, name at domain escibió:
> my asus x54c work perfect 100 % trisquel 7
I can see that hardware has been reported as usable in h-node.com. Is it
a laptop. Please report it as such in h-node if it is.
--
Saludos libres,
Quiliro Ordóñez
600 8579
i have a insert on h-node :) hi
gennaro
http://h-node.org/wiki/page/en/asus-x54c-i3-processor-quad-core-trisquel-7-0
That's not how you add it. You have to add it here. It's already there at http://h-node.org/notebooks/view/en/704/X54C. The video card is said not to work with 3d acceleration, but I have the same card in my desktop and it works, so change it if 3d acceleration works. Also change the distro and kernel tested.
EDIT: And remove the wiki page, it's unreadable.
- Vous devez vous identifier ou créer un compte pour écrire des commentaires