how to install librecmc on gl ar300m16?
- Anmelden oder Registrieren um Kommentare zu schreiben
https://librecmc.org/index.html
Can you tell how to install the newest librecmc version available on the
gl ar300m16?
Thanks.
"Please feel free to contact us regarding any questions that you may have."
https://librecmc.org/contact.html
had already emailed librecmc at info(a)librecmc.org. No response.
https://lists.librecmc.org/mailman/listinfo does not
work.
IRC: Libera
Server: irc.libera.chat
Channel: #libreCMC
GPG:
bob[at]librecmc.org
Fingerprint : DE0A 8D01 5F03 409C F11D AE55 979B 9775 C7D8 655C
I use tor. Irc libera has a policy which prohibits you from registering on irc libera over tor. Therefore I cannot join irc libera. I have been told you can register on irc libera over vpn or use a random public router. Both solutions I find not acceptable. I have investigated if registering on irc libera via tor -> vpn -> irc libera is possible? I found no such solution. Do you know how to circumvent the irc libera registration over tor ban?
bob[at]librecmc.org
Is that a librecmc official I can write an email?
https://libera.chat/guides/connect#accessing-liberachat-via-tor
> Is that a librecmc official I can write an email?
It is on the libreCMC contact page, together with a link to a GPG public key asc file and fingerprint. So it is most probably a deep sea monster waiting to gobble you.
what follows are instructions on how to install librecmc on a
new gl ar300m16 router.
Installing librecmc requires a pair of librecmc files. You get them on
https://librecmc.org/librecmc/downloads/snapshots/v6.1/targets/ath79/generic/
Regarding the gl ar300m16 you got two options:
Option 1:
download librecmc-ath79-generic-glinet_gl-ar300m16-initramfs-kernel.bin and
librecmc-ath79-generic-glinet_gl-ar300m16-squashfs-sysupgrade.bin
Option 2:
download librecmc-ath79-generic-thinkpenguin_tpe-r1300-initramfs-kernel.bin and
librecmc-ath79-generic-thinkpenguin_tpe-r1300-squashfs-sysupgrade.bin
In order to install either librecmc option 1 or 2 you may
follow the steps described on
https://philtel.org/2022/11/09/flashing-openwrt-on-the-gl-ar300m16-router.html
Instead of installing openwrt you can install the librecmc pair of
files in question.
In a command line command ip route will tell you
the ip address of the router after you have installed
the initramfs file.