Penguin Wireless N USB Adapter for GNU / Linux (TPE-N150USB) not working :(

13 Antworten [Letzter Beitrag]
fbit

I am a member!

Offline
Beigetreten: 07/07/2013

About a month ago, I purchased a Penguin Wireless N USB Adapter for GNU / Linux (TPE-N150USB) and installed it on a mac book pro running trisquel 6.0 following the instructions on the thinkpenguin.com website (https://www.thinkpenguin.com/gnu-linux/penguin-wireless-n-usb-adapter-gnu-linux-tpe-n150usb).

The card worked immediately as soon as I copied the firmware files to /lib/firmware/

Today I received another identical USB Adapter and tried installing it on my wife's computer in the same way, but could not get it to work. I have restarted the computer to no avail.

Although the mac book pro's are not exactly the same (one is about a year newer than the other) I don't see there are many differences aside from RAM and processor.

Trisquel was installed in exactly the same way for both computers.

I tried blacklisting the b43 firmware thinking it might be causing a conflict (which I did not have to do with the first computer): echo blacklist b43 | sudo tee -a /etc/modprobe.d/blacklist-b43.conf

After doing this I just cannot see the option to enable or disable wireless networking anymore, but nothing else seems to have changed.

typing sudo lsusb I can see:

Bus 003 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n

Which I think is the Penguin USB Wifi adapter.

Typing iwconfig I get the following:

lo no wireless extensions.
eth0 no wireless extensions.

Does anyone know how I can get the wifi adapter to work? :'(

Thank you!

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

Update. I don't know if this information can be useful...

$sudo ifconfig
eth0 Link encap:Ethernet HWaddr a8:20:66:47:6e:e4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:730001 errors:0 dropped:0 overruns:0 frame:0
TX packets:459965 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:957109649 (957.1 MB) TX bytes:68946535 (68.9 MB)
Interrupt:16

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:170 errors:0 dropped:0 overruns:0 frame:0
TX packets:170 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15953 (15.9 KB) TX bytes:15953 (15.9 KB)

MagicFab
Offline
Beigetreten: 12/13/2010

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 2013-08-24 16:58, name at domain wrote:
> Does anyone know how I can get the wifi adapter to work?

If you have the same configuration, try plugging in the other
(working) USB adapter. This will at least rule out (or confirm) a
hardware problem. Also try different USB ports.

F.

- --
Fabián Rodríguez
http://trisquel.magicfab.ca
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
Comment: PGP/Mime available upon request
Comment: Using GnuPG with Icedove - http://www.enigmail.net/

iEYEARECAAYFAlIZOWEACgkQfUcTXFrypNW76wCgzym51xAQ50PasNtzKDbLPtst
NNkAmgJYYkcPu74X5ZfXZ4QpATfdrQBB
=ymeT
-----END PGP SIGNATURE-----

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

Thanks MagicFab. I tried the adapter on the other computer and it works fine. The USB ports on the new computer both work fine for everything else. My guess is that this is a configuration problem.

quiliro@congresolibre.org
Offline
Beigetreten: 10/28/2010

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

El 24/08/13 19:16, name at domain escribió:
> Thanks MagicFab. I tried the adapter on the other computer and it works fine. The USB ports on the
new computer both work fine for everything else. My guess is that this
is a configuration problem.
>

Did you try the live making the suggested changes with the new hardware?

- --
Saludos libres,

Quiliro Ordóñez
Presidente (en co-gobierno con los socios)
Asociación de Software Libre del Ecuador - ASLE
6008579

Recuerda que todas tus comunicaciones están siendo vigiladas. Lo que
puedes hacer para restar su eficacia es eliminar el software privativo
de tus computadores, evitar el software como servicio, almacenar tus
datos en tus propios equipos y encriptar todas tus comunicaciones.

Toda la información contenida en este mensaje es libre de uso y
distribución con o sin modificaciones y todo correo que reciba implica
que el remitente acepta que tendrá las mismas libertades sin importar
cualquier clausula de confidencialidad o restricción anterior o posterior.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
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=jNyv
-----END PGP SIGNATURE-----

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

hi quiliro: No I didn't. How do I do that? Thank you.

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

Maybe this additional information can help to understand the problem?

1) I disconnected the USB Wifi

2) I ran:

$ sudo tail -n 0 -f /var/log/syslog

3) This was the output:

Aug 24 20:01:41 nsu-gnu kernel: [ 5540.141332] usb 3-2: new high-speed USB device number 6 using xhci_hcd
Aug 24 20:01:42 nsu-gnu kernel: [ 5540.451172] usb 3-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51000
Aug 24 20:01:42 nsu-gnu kernel: [ 5540.451379] xhci_hcd 0000:00:14.0: ERROR no room on ep ring
Aug 24 20:01:42 nsu-gnu kernel: [ 5540.454249] usb 3-2: ath9k_htc: Unable to allocate URBs
Aug 24 20:01:42 nsu-gnu kernel: [ 5540.454284] ath9k_htc: probe of 3-2:1.0 failed with error -22
Aug 24 20:01:52 nsu-gnu dhclient: DHCPREQUEST of 192.168.1.71 on eth0 to 192.168.1.100 port 67
Aug 24 20:01:52 nsu-gnu dhclient: DHCPACK of 192.168.1.71 from 192.168.1.100
Aug 24 20:01:52 nsu-gnu dhclient: bound to 192.168.1.71 -- renewal in 51 seconds

jxself
Offline
Beigetreten: 09/13/2010

> ERROR no room on ep ring

If you do some searching online you'll find that this is a known problem and fixed in later kernel versions.

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

I found this:
http://forum.pinguyos.com/Thread-Wireless-not-working-with-TL-W722N

Which seems to be the exact problem I'm having.

This is my kernel version:

$ uname -a
Linux nsu-gnu 3.2.0-52-generic #0trisquel1 SMP Fri Aug 23 00:17:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

thank you jxself. Should I update the kernel? Sorry I'm not very experienced :(

jxself
Offline
Beigetreten: 09/13/2010

I have an APT repository that makes getting a newer kernel easy. Information and instructions are available at http://jxself.org/linux-libre/

Plus, I have precompiled firmware available at http://jxself.org/ath9k-htc/ - Just drop the two .fw files into /lib/firmware.

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

The computer that IS working, is running the same kernel version:

$ uname -a
Linux m 3.2.0-52-generic #0trisquel1 SMP Fri Aug 23 00:17:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

Thank you for your help. That is where I got the firmware. I will try getting the new kernel from your repository.

fbit

I am a member!

Offline
Beigetreten: 07/07/2013

It worked! Thank you so much jxself! :)