Trisquel Installer for 5.5
- Login o registrati per inviare commenti
The Standard installer (Gnome 3) stalls on.
log-output -t ubiquity laptop-detect (see attached screenshot)
I'm on a desktop machine which I built myself so I suppose that could be an issue. My PC isn't a brand or laptop. Perhaps this laptop-detect fails because there is no information?
Previously I used the network installer which works without a problem.
Anyone have any thoughts on this issue? Is it a bug?
Thanks,
I am a member!
It probably has nothing to do with it being a custom built machine.
You know I had a similar issue although I don't think it was exactly the same. I left my computer on while installing and then went to a class and came back (~2 hours later) and it was done. I don't know if there is some sort of hangup but what happens when you leave it and just let it do it's thing? I'm not saying taking an exceedingly long time is not a bug but we have to make sure it isn't really frozen.
You know I had a similar issue although I don't think it was exactly the
same. I left my computer on while installing and then went to a class and
came back (~2 hours later) and it was done. I don't know if there is some
sort of hangup but what happens when you leave it and just let it do it's
thing? I'm not saying taking an exceedingly long time is not a bug but we
have to make sure it isn't really frozen.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 2012-04-22 18:12, name at domain wrote:
> Screenshot mentioned above attached here.
Is there any reason none of the replies in this mailing list include
any quotes from messages they answer to?
Just curious, it makes it that harder to follow some threads.
Cheers,
Fabian Rodriguez
http://trisquel.magicfab.ca
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: PGP/Mime available upon request
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/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=SwoH
-----END PGP SIGNATURE-----
I think that most users use the forum.
I think that most users use the forum.
I am a member!
Maybe because the list mirrors the web site forum, from which most of
the messages come? If you're reading the forum on the web site, threads
may be easier to follow, especially visually, without the quoted text?
-Dave
On 04/22/2012 09:45 PM, Fabián Rodríguez wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 2012-04-22 18:12, name at domain wrote:
>> Screenshot mentioned above attached here.
>
> Is there any reason none of the replies in this mailing list include
> any quotes from messages they answer to?
>
> Just curious, it makes it that harder to follow some threads.
>
> Cheers,
>
> Fabian Rodriguez
> http://trisquel.magicfab.ca
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.11 (GNU/Linux)
> Comment: PGP/Mime available upon request
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iQIcBAEBAgAGBQJPlLQ9AAoJEF/fbqfpNt4ZN1wP/0SEczxAJqN/H84eV3ZWGctm
> cnmzxXAxI4S9dkKReCnDl/1h7dIRBQn+xeLsYVE4e06hOIi7D2di6HdHVaM9qM5L
> qx7ONFoQTr02qEqE8yLCN6stam42X8wxp83v0prRutjXSvvxn/CHTR4sxZgMambW
> n0IA1g/tC6vIKvlpwwS4Eo1MLDh+LP1ghdHGCsLxmPFdbX0Pv8+K1Pnbow0mYS87
> nvnLeHnK8BK6VDmYcVHotb5lOeMwuOsTDEXSi1VSpNO1FU3H75HubcKO5Up17nTM
> HcAGg8sxDtVlhaz21aHygBVShkhv4l9Sx6g+ixZCWIET5g5SwwFNyOjeewX3vV8z
> 5RnRHzVcK8mI0hgjS8kjL5tfi/Rfv1Ig8BA81Q2IRquLzmfjFPQRqomjnNs/pcIL
> 95lNUS8ADQu4hpUq02meGOscMSKiLgRgtLGbRCWbTlNtQ8IjesdGac7Q+CzKFLyD
> B5VoaM7kX9iVm0qIVXDPkW1Smmx/tzF++0p3OaVZTeDBjDjLXeh4aZ0VMu8r/sZN
> uow55Ddr8ODQE9Z/BMam8VZ2XsbuA8OCYEbBsuGZLH4inle4sPpwphGELiw41n+q
> TffMoB2wEeVFcTTGCgvkJuvMJf2EMDpacehv+6d9TI2L2sX1R4b8awzUQ/ycn2wu
> meYhiFGXaBR6stAKsiTL
> =SwoH
> -----END PGP SIGNATURE-----
*duplicate post*
I had the same please wait bug. I waited for one hour the first time and it
never budged. The second time it took like 1 minute to proceed.
It's some crazy (networking?) bug. Try again...
I did hit skip but the installer was stalled or froze.
I used the net install to bypass the problem.
Thanks for the replies everyone.
Installing trisquel 5.5 using a USB drive the installation seemed to freeze similar to what you describe. In the gui there was the "Please wait" with the cursor spinning. It appears to have stopped at the same spot as your screenshot.
In my case it appears there is a malformed command somewhere in the installation script. Using "top" I noticed a line similar to the following:
"sudo wget -o /dev/null -O /dev/null ftp://in.archive.trisquel.info/trisquel//speedtest"
I believe the line is incorrectly formed as a server at in.archive.trisquel.info does not exist but archive.trisquel.info does. In addition I'm not sure the double "//" is correct. Using "sudo top" to identify and kill this offending command, the installation seemed to move ahead and complete.
Hope this helps work around and perhaps fix the bug.
Arrg I forgot to mention that I was installing via USB. That's got to be the issue.
Arrg I forgot to mention that I was installing via USB. That's got to be the
issue.
How do you do this? I am a n00b and would like to know the steps on how you
were able to open this up while installing.
Installing trisquel 5.5 using a USB drive the installation seemed to freeze
similar to what you describe. In the gui there was the "Please wait" with the
cursor spinning. It appears to have stopped at the same spot as your
screenshot.
In my case it appears there is a malformed command somewhere in the
installation script. Using "top" I noticed a line similar to the following:
"sudo wget -o /dev/null -O /dev/null
ftp://in.archive.trisquel.info/trisquel//speedtest"
I believe the line is incorrectly formed as a server at
in.archive.trisquel.info does not exist but archive.trisquel.info does. In
addition I'm not sure the double "//" is correct. Using "sudo top" to
identify and kill this offending command, the installation seemed to move
ahead and complete.
Hope this helps work around and perhaps fix the bug.
How do you do this? I am a n00b and would like to know the steps on how you were able to open this up while installing.
I am a member!
It probably has nothing to do with it being a custom built machine.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 12-04-22 08:40 PM, name at domain wrote:
> It probably has nothing to do with it being a custom built machine.
This may also explain why I never get the first message of such threads.
I've disabled all filters I had on Trisquel lists so I can track this
down. Thanks for clarifying this.
F.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: PGP/Mime available upon request
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk+VVaUACgkQfUcTXFrypNVrRgCg62zkXb2HX4btNgSuoVtXShO9
z58An3nhqKvDUDZOk3rsv0qeN5i3gWzD
=CQLL
-----END PGP SIGNATURE-----
There are bugs in the software which synchronizes the mailing list and
the forum. That's why some messages might not get to the mailing list.
Assembling a computer on your isn't something that easy mess up, if
you are not being careless. You shouldn't worry much about assembling
a computer on your own.
*duplicate*
I had the same issue. The skip button did nothing. I waited extra long and the installation continued on its own. I think this part took about 10 minutes before it moved on.
I had the same please wait bug. I waited for one hour the first time and it never budged. The second time it took like 1 minute to proceed.
It's some crazy (networking?) bug. Try again...
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 2012-04-23 05:20, name at domain wrote:
> I had the same please wait bug. I waited for one hour the first
> time and it never budged. The second time it took like 1 minute to
> proceed.
>
> It's some crazy (networking?) bug. Try again...
This is an old Ubuntu bug. You need to perform the install while
having your netowrk cabled disconnected. Took me a couple of times to
figure out.
F.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: PGP/Mime available upon request
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/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=QFsQ
-----END PGP SIGNATURE-----
>This is an old Ubuntu bug. You need to perform the install while having your netowrk cabled disconnected. Took me a couple of times to figure out.
I just tried to install 3 times with connection... please wait... and this is what I did 4th time and it helped, thanks!
>This is an old Ubuntu bug. You need to perform the install while having your
netowrk cabled disconnected. Took me a couple of times to figure out.
I just tried to install 3 times with connection... please wait... and this is
what I did 4th time and it helped, thanks!
I experienced the same bug during install. After many repeated attempts I found this post and tried the install without an internet connection, and it worked.
May I suggest that this bug would be an important one to fix. Who knows how many people have been put off Trisquel here at the first hurdle? I would have had to choose a different distro if I hadn't found this post.
I made a forum account just to post this. Many thanks to the developers of this excellent free distro, but please fix this bug! (or at least warn people to disable internet if they get the bug!)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Le 12-10-14 01:57 PM, name at domain a écrit :
> I experienced the same bug during install. After many repeated attempts I found this post and
tried the install without an internet connection, and it worked.
>
> May I suggest that this bug would be an important one to fix. Who
knows how many people have been put off Trisquel here at the first
hurdle? I would have had to choose a different distro if I hadn't found
this post.
>
> I made a forum account just to post this. Many thanks to the
developers of this excellent free distro, but please fix this bug! (or
at least warn people to disable internet if they get the bug!)
My understanding of the release process here (similar in Ubuntu too) is
that once a release is out the oven, it's done.
Except for LTS releases (so, upcoming Trisquel 6 series), there won't be
new versions of the installer, so this bug will remain - it would be a
good idea to test this in the upcomgin version 6 and see if it still is
there.
If anything, this should be highlighted in release notes, but there
won't be a new installer for 5.5.
Cheers,
Fabian Rodriguez
http://trisquel.magicfab.ca
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: PGP/Mime available upon request
Comment: Using GnuPG with Mozilla - http://www.enigmail.net/
iEYEARECAAYFAlB7ZgwACgkQfUcTXFrypNVHogCdHW67KN/tQx+ALG7Z3bDrWYHI
+J4An3inpFZFgE5+8kMWQnDrFw2Q33Af
=wfIn
-----END PGP SIGNATURE-----
I used the net install to avoid the problem, It took longer but was worth the effort. Not only did I end up with the freshest possible install but It offered some security options and gave me a better understanding of text-based installers.
Thank you everyone for your feedback and suggestions
Speaking of the trisquel installer, I had some strange issues with my
installer this past week. My dvd-cd drive went out on my laptop, it no
longer functions, so I dragged out a usb one that plugs into my computer
and then into the wall. Trisquel started up just fine, and ran ok on the
disk, but when i went to run the installer I got past all the steps,
partitioning, user name, timezone, etc. Just after teh ubiquity slide
show pops up I get an error that the installer cannot copy files to my
hard drive, input/output error. The installer thinks teh dvd is dirty or
dammaged, and I should clean it. i'm not so sure about that. I think
maybe the usb dvd drive has trouble keeping up with teh requests coming
to it from trisquel. does anyone have any ideas? I'm trying to install
trisquel back onto this laptop after breaking it trying to install
voxin, grins. On 04/29/2012 03:39 PM, name at domain wrote:
> I did hit skip but the installer was stalled or froze.
>
> I used the net install to bypass the problem.
> Thanks for the replies everyone.
I had these kinds of messages on a netbook with bad RAM. Replacing the RAM fixed the problem. Not saying this is the problem with your computer, but it can't hurt to run memtest86+ (available from grub once installed) just to make sure.
This is completely off topic, so please disreguard, I couldn't find the
person from thinkpenguin's address in my inbox so am sending a reply to
the trisq uel list. Sorry, i'm not sure how else to do this. Can you
please contact me off list? I'm thinking about buying one of your
computers, specifically the pro one, but am on a very tight budget, very
limited income so was wondering if you took payments or anything of the
kind, I can't find anything on your website. My email address is
name at domain. Sorry for cluttering up the list.
thanks
kendell clark
Did you use the built-in integrity check on the disc? If it won't work, perhaps make a liveusb stick.
Did you use the built-in integrity check on the disc? If it won't work,
perhaps make a liveusb stick.
- Login o registrati per inviare commenti