Help! GUI doesn't install????
- Anmelden oder Registrieren um Kommentare zu schreiben
I just installed Trisquel Mini on a 9 year old laptop (previously running Windows XP). Everything went smoothly, except that I didn't get the GUI. When I start the laptop, the attractive Trisquel desktop background appears, then it turns into a terminal where I can login.
Same thing happened when I erased Ubuntu on my 2009 Toshiba and tried to install Trisquel. Now I have two GUI-less laptops.
What's going on? Didn't get any errors. How do I remedy this?
I just tried to install Trisquel 6 again on the 2009 Toshiba laptop...at the scanning the CD stage, I got the error message:
"An attempt to configure apt to install additional packages from the CD failed."
I clicked okay.
"Installation complete. You need to restart the computer to use the new installation."
When I hit restart, it froze.
There may be problems with your CD. Anyway, I suggest "burning" it to a flash drive instead, using something like unetbootin (which can be searched for on the web). Unetbootin supports non-free distros, though.
There's a version http://www.aligunduz.org/FUSBi/ that doesn't list non-free distros but it's quite old. But I reckon it'll still work, despite being old.
@davidnotcoulthard
I do have it on a USB drive, made with Unetbootin. Same results when I try to install it that way...
I also selected the "check CD for errors" feature. It all looked good.
?
My friends told me
unetbootin Has The problems with Windows
When used
faced a lot of problems
try
http://trisquel.info/en/wiki/how-create-liveusb
Are you sure you burned Trisquel Mini and not Trisquel NetInstall (whose default install is terminal-only)?
Anyway, you should try to install the Trisquel Mini environment on top of the currently installed system. You just need to log into the terminal session and execute this command (that will ask for your password again):
$ sudo apt-get install trisquel-mini trisquel-mini-recommended
If the command tells you that both packages have already been installed, then you had burned Trisquel Mini in the first place. You should then show us the output of this command:
$ startx
Otherwise (the packages were not previously installed), just reboot:
$ sudo reboot
You could as well avoid the reboot and directly ask for the graphical display manager but I am not sure of the command to execute (probably 'sudo service lxdm start').
@Magic Banana
Thanks for your response, it helped...but still some issues.
After typing in
$sudo apt-get install trisquel-mini trisquel-mini recommended
it seemed to download some packages, some said previously installed.
I then rebooted, still ended up at terminal.
When I ran
$ startx
I got the message:
-bash: startx: command not found
I then tried
$ sudo service lxdm start
just for the heck of it, went straight to the Mini desktop after it prompted me for my passwords. Was really excited, and explored around. Unfortunately, after rebooting I was right back at the terminal screen and had to enter this command to go back to Mini desktop.
???
So, basically, the only remaining problem is that LXDM does not automatically start, right?
The problem may be in GRUB's configuration. Take a look at the GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub. If the keyword "text" is present then remove it (you will need administrator's privileges to edit this file) and execute:
$ sudo update-grub
A subsequent reboot will tell if your problem is solved.
If the variable in /etc/default/grub was OK, then try to add LXDM as a script to start at init time:
$ sudo update-rc.d lxdm defaults
If that still does not solve your problem, we could look at /etc/init/lxdm.conf and see if LXDM is supposed to start at runlevel 2 (it should be).
@MagicBanana
I didn't see anything that said "text" in /etc/default/grub. This is what it looks like:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux-Libre (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
# Trisquel comes without kernel recovery entries to improve security.
GRUB_DISABLE_RECOVERY=true
I added the LXDM script:
$ sudo update-rc.d lxdm defaults
successfully, but I didn't see any changes when I rebooted.
That configuration file looks OK for a graphical system. Let us take a look at your /var/log/Xorg.0.log
[ 45.133]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 45.133] X Protocol Version 11, Revision 0
[ 45.133] Build Operating System: Linux 2.6.42-37-generic x86_64 Ubuntu
[ 45.133] Current Operating System: Linux Pavilion-dv8000-EZ580UA-ABA 3.2.0-60-generic #0trisquel1 SMP Fri Mar 7 04:19:02 UTC 2014 x86_64
[ 45.133] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-60-generic root=UUID=f015e351-f240-4f38-8850-2ce5b0ca4a4e ro quiet splash vt.handoff=7
[ 45.133] Build Date: 16 October 2013 04:41:23PM
[ 45.133] xorg-server 2:1.11.4-0ubuntu10.14 (For technical support please see http://www.ubuntu.com/support)
[ 45.133] Current version of pixman: 0.30.2
[ 45.133] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 45.133] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45.133] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 14 00:33:23 2014
[ 45.134] (==) Using config file: "/etc/X11/xorg.conf"
[ 45.134] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 45.134] (==) No Layout section. Using the first Screen section.
[ 45.134] (==) No screen section available. Using defaults.
[ 45.134] (**) |-->Screen "Default Screen Section" (0)
[ 45.134] (**) | |-->Monitor ""
[ 45.134] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 45.134] (**) | |-->Device "Default"
[ 45.134] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 45.134] (==) Automatically adding devices
[ 45.134] (==) Automatically enabling devices
[ 45.134] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[ 45.134] Entry deleted from font path.
[ 45.134] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 45.134] Entry deleted from font path.
[ 45.134] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 45.134] Entry deleted from font path.
[ 45.134] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 45.134] Entry deleted from font path.
[ 45.134] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 45.134] Entry deleted from font path.
[ 45.134] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 45.134] Entry deleted from font path.
[ 45.134] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
[ 45.134] Entry deleted from font path.
[ 45.135] (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
[ 45.135] (==) FontPath set to:
/usr/share/fonts/X11/Type1,
built-ins
[ 45.135] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 45.135] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45.135] (II) Loader magic: 0x7f8f7e0d6b00
[ 45.135] (II) Module ABI versions:
[ 45.135] X.Org ANSI C Emulation: 0.4
[ 45.135] X.Org Video Driver: 11.0
[ 45.135] X.Org XInput driver : 16.0
[ 45.135] X.Org Server Extension : 6.0
[ 45.135] (--) PCI:*(0:1:5:0) 1002:5955:103c:309b rev 0, Mem @ 0xc8000000/134217728, 0xc0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 45.136] (II) Open ACPI successful (/var/run/acpid.socket)
[ 45.136] (II) LoadModule: "extmod"
[ 45.136] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 45.137] (II) Module extmod: vendor="X.Org Foundation"
[ 45.137] compiled for 1.11.3, module version = 1.0.0
[ 45.137] Module class: X.Org Server Extension
[ 45.137] ABI class: X.Org Server Extension, version 6.0
[ 45.137] (II) Loading extension MIT-SCREEN-SAVER
[ 45.137] (II) Loading extension XFree86-VidModeExtension
[ 45.137] (II) Loading extension XFree86-DGA
[ 45.137] (II) Loading extension DPMS
[ 45.137] (II) Loading extension XVideo
[ 45.137] (II) Loading extension XVideo-MotionCompensation
[ 45.137] (II) Loading extension X-Resource
[ 45.137] (II) LoadModule: "dbe"
[ 45.137] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 45.137] (II) Module dbe: vendor="X.Org Foundation"
[ 45.137] compiled for 1.11.3, module version = 1.0.0
[ 45.137] Module class: X.Org Server Extension
[ 45.137] ABI class: X.Org Server Extension, version 6.0
[ 45.137] (II) Loading extension DOUBLE-BUFFER
[ 45.137] (II) LoadModule: "glx"
[ 45.138] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45.138] (II) Module glx: vendor="X.Org Foundation"
[ 45.138] compiled for 1.11.3, module version = 1.0.0
[ 45.138] ABI class: X.Org Server Extension, version 6.0
[ 45.138] (==) AIGLX enabled
[ 45.138] (II) Loading extension GLX
[ 45.138] (II) LoadModule: "record"
[ 45.138] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 45.138] (II) Module record: vendor="X.Org Foundation"
[ 45.138] compiled for 1.11.3, module version = 1.13.0
[ 45.138] Module class: X.Org Server Extension
[ 45.138] ABI class: X.Org Server Extension, version 6.0
[ 45.138] (II) Loading extension RECORD
[ 45.138] (II) LoadModule: "dri"
[ 45.139] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 45.139] (II) Module dri: vendor="X.Org Foundation"
[ 45.139] compiled for 1.11.3, module version = 1.0.0
[ 45.139] ABI class: X.Org Server Extension, version 6.0
[ 45.139] (II) Loading extension XFree86-DRI
[ 45.139] (II) LoadModule: "dri2"
[ 45.139] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45.140] (II) Module dri2: vendor="X.Org Foundation"
[ 45.140] compiled for 1.11.3, module version = 1.2.0
[ 45.140] ABI class: X.Org Server Extension, version 6.0
[ 45.140] (II) Loading extension DRI2
[ 45.140] (==) Matched fglrx as autoconfigured driver 0
[ 45.140] (==) Matched ati as autoconfigured driver 1
[ 45.140] (==) Matched vesa as autoconfigured driver 2
[ 45.140] (==) Matched fbdev as autoconfigured driver 3
[ 45.140] (==) Assigned the driver to the xf86ConfigLayout
[ 45.140] (II) LoadModule: "fglrx"
[ 45.140] (WW) Warning, couldn't open module fglrx
[ 45.140] (II) UnloadModule: "fglrx"
[ 45.140] (II) Unloading fglrx
[ 45.140] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 45.140] (II) LoadModule: "ati"
[ 45.141] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 45.141] (II) Module ati: vendor="X.Org Foundation"
[ 45.141] compiled for 1.11.3, module version = 6.14.99
[ 45.141] Module class: X.Org Video Driver
[ 45.141] ABI class: X.Org Video Driver, version 11.0
[ 45.141] (II) LoadModule: "radeon"
[ 45.141] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 45.142] (II) Module radeon: vendor="X.Org Foundation"
[ 45.142] compiled for 1.11.3, module version = 6.14.99
[ 45.142] Module class: X.Org Video Driver
[ 45.142] ABI class: X.Org Video Driver, version 11.0
[ 45.142] (II) LoadModule: "vesa"
[ 45.142] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 45.142] (II) Module vesa: vendor="X.Org Foundation"
[ 45.142] compiled for 1.11.3, module version = 2.3.0
[ 45.142] Module class: X.Org Video Driver
[ 45.142] ABI class: X.Org Video Driver, version 11.0
[ 45.142] (II) LoadModule: "fbdev"
[ 45.142] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 45.142] (II) Module fbdev: vendor="X.Org Foundation"
[ 45.142] compiled for 1.11.3, module version = 0.4.2
[ 45.142] ABI class: X.Org Video Driver, version 11.0
[ 45.142] (==) Matched fglrx as autoconfigured driver 0
[ 45.142] (==) Matched ati as autoconfigured driver 1
[ 45.142] (==) Matched vesa as autoconfigured driver 2
[ 45.142] (==) Matched fbdev as autoconfigured driver 3
[ 45.142] (==) Assigned the driver to the xf86ConfigLayout
[ 45.143] (II) LoadModule: "fglrx"
[ 45.143] (WW) Warning, couldn't open module fglrx
[ 45.143] (II) UnloadModule: "fglrx"
[ 45.143] (II) Unloading fglrx
[ 45.143] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 45.143] (II) LoadModule: "ati"
[ 45.143] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 45.143] (II) Module ati: vendor="X.Org Foundation"
[ 45.144] compiled for 1.11.3, module version = 6.14.99
[ 45.144] Module class: X.Org Video Driver
[ 45.144] ABI class: X.Org Video Driver, version 11.0
[ 45.144] (II) LoadModule: "vesa"
[ 45.144] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 45.144] (II) Module vesa: vendor="X.Org Foundation"
[ 45.144] compiled for 1.11.3, module version = 2.3.0
[ 45.144] Module class: X.Org Video Driver
[ 45.144] ABI class: X.Org Video Driver, version 11.0
[ 45.144] (II) UnloadModule: "vesa"
[ 45.144] (II) Unloading vesa
[ 45.144] (II) Failed to load module "vesa" (already loaded, 0)
[ 45.144] (II) LoadModule: "fbdev"
[ 45.144] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 45.144] (II) Module fbdev: vendor="X.Org Foundation"
[ 45.144] compiled for 1.11.3, module version = 0.4.2
[ 45.144] ABI class: X.Org Video Driver, version 11.0
[ 45.144] (II) UnloadModule: "fbdev"
[ 45.144] (II) Unloading fbdev
[ 45.144] (II) Failed to load module "fbdev" (already loaded, 0)
[ 45.144] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS
[ 45.148] (II) VESA: driver for VESA chipsets: vesa
[ 45.148] (II) FBDEV: driver for framebuffer: fbdev
[ 45.148] (++) using VT number 7
[ 45.156] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 45.156] (II) [KMS] Kernel modesetting enabled.
[ 45.156] (WW) Falling back to old probe method for vesa
[ 45.156] (WW) Falling back to old probe method for fbdev
[ 45.156] (II) Loading sub module "fbdevhw"
[ 45.156] (II) LoadModule: "fbdevhw"
[ 45.156] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 45.157] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 45.157] compiled for 1.11.3, module version = 0.0.2
[ 45.157] ABI class: X.Org Video Driver, version 11.0
[ 45.157] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45.157] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 45.157] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 45.157] (==) RADEON(0): Default visual is TrueColor
[ 45.157] (==) RADEON(0): RGB weight 888
[ 45.157] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 45.157] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5955 (PCIE)" (ChipID = 0x5955)
[ 45.157] (II) RADEON(0): PCI card detected
[ 45.157] drmOpenDevice: node name is /dev/dri/card0
[ 45.157] drmOpenDevice: open result is 12, (OK)
[ 45.157] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 45.157] drmOpenDevice: node name is /dev/dri/card0
[ 45.157] drmOpenDevice: open result is 12, (OK)
[ 45.157] drmOpenByBusid: drmOpenMinor returns 12
[ 45.157] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 45.157] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
[ 45.157] (II) Loading sub module "shadow"
[ 45.157] (II) LoadModule: "shadow"
[ 45.157] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 45.168] (II) Module shadow: vendor="X.Org Foundation"
[ 45.168] compiled for 1.11.3, module version = 1.1.0
[ 45.168] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45.168] (II) RADEON(0): KMS Color Tiling: disabled
[ 45.168] (II) RADEON(0): KMS Pageflipping: enabled
[ 45.168] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 45.192] (II) RADEON(0): Output VGA-0 has no monitor section
[ 45.192] (II) RADEON(0): Output LVDS has no monitor section
[ 45.192] (II) RADEON(0): Output S-video has no monitor section
[ 45.218] (II) RADEON(0): EDID for output VGA-0
[ 45.218] (II) RADEON(0): EDID for output LVDS
[ 45.218] (II) RADEON(0): Manufacturer: LPL Model: 2388 Serial#: 0
[ 45.218] (II) RADEON(0): Year: 2005 Week: 0
[ 45.218] (II) RADEON(0): EDID Version: 1.2
[ 45.218] (II) RADEON(0): Digital Display Input
[ 45.218] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 45.218] (II) RADEON(0): Gamma: 2.20
[ 45.218] (II) RADEON(0): No DPMS capabilities specified
[ 45.218] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 45.218] (II) RADEON(0): First detailed timing is preferred mode
[ 45.218] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 45.218] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 45.218] (II) RADEON(0): Manufacturer's mask: 0
[ 45.218] (II) RADEON(0): Supported detailed timing:
[ 45.218] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 230 mm
[ 45.218] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 45.218] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 45.218] (II) RADEON(0): LGPhilipsLCD
[ 45.218] (II) RADEON(0): LP171WP4-TL03
[ 45.218] (II) RADEON(0): EDID (in hex):
[ 45.218] (II) RADEON(0): 00ffffffffffff00320c882300000000
[ 45.218] (II) RADEON(0): 000f0102802517780a8ef09758518d28
[ 45.218] (II) RADEON(0): 24505400000001010101010101010101
[ 45.218] (II) RADEON(0): 0101010101019525a04051840c304020
[ 45.218] (II) RADEON(0): 13006fe6100000190000000000000000
[ 45.218] (II) RADEON(0): 00000000000000000000000000fe004c
[ 45.218] (II) RADEON(0): 475068696c6970734c43440a000000fe
[ 45.218] (II) RADEON(0): 004c503137315750342d544c30330061
[ 45.218] (II) RADEON(0): Printing probed modes for output LVDS
[ 45.218] (II) RADEON(0): Modeline "1440x900"x59.9 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 45.218] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
[ 45.218] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 45.218] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 45.218] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 45.218] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 45.218] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 45.218] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 45.218] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 45.218] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 45.218] (II) RADEON(0): EDID for output S-video
[ 45.218] (II) RADEON(0): Output VGA-0 disconnected
[ 45.218] (II) RADEON(0): Output LVDS connected
[ 45.218] (II) RADEON(0): Output S-video disconnected
[ 45.218] (II) RADEON(0): Using exact sizes for initial modes
[ 45.218] (II) RADEON(0): Output LVDS using initial mode 1440x900
[ 45.218] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 45.218] (II) RADEON(0): mem size init: gart size :1feff000 vram size: s:8000000 visible:7ace000
[ 45.218] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 45.218] (==) RADEON(0): DPI set to (96, 96)
[ 45.218] (II) Loading sub module "fb"
[ 45.218] (II) LoadModule: "fb"
[ 45.219] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45.230] (II) Module fb: vendor="X.Org Foundation"
[ 45.230] compiled for 1.11.3, module version = 1.0.0
[ 45.230] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45.230] (II) Loading sub module "ramdac"
[ 45.230] (II) LoadModule: "ramdac"
[ 45.230] (II) Module "ramdac" already built-in
[ 45.230] (II) UnloadModule: "vesa"
[ 45.230] (II) Unloading vesa
[ 45.230] (II) UnloadModule: "fbdev"
[ 45.230] (II) Unloading fbdev
[ 45.230] (II) UnloadModule: "fbdevhw"
[ 45.230] (II) Unloading fbdevhw
[ 45.230] (--) Depth 24 pixmap format is 32 bpp
[ 45.231] (II) RADEON(0): Front buffer size: 5176K
[ 45.231] (II) RADEON(0): VRAM usage limit set to 108518K
[ 45.252] (==) RADEON(0): Backing store disabled
[ 45.252] (WW) RADEON(0): Direct rendering disabled
[ 45.252] (II) RADEON(0): Acceleration disabled
[ 45.252] (==) RADEON(0): DPMS enabled
[ 45.252] (==) RADEON(0): Silken mouse enabled
[ 45.252] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 45.253] (WW) RADEON(0): Option "GLXVBlank" is not used
[ 45.253] (--) RandR disabled
[ 45.253] (II) Initializing built-in extension Generic Event Extension
[ 45.253] (II) Initializing built-in extension SHAPE
[ 45.253] (II) Initializing built-in extension MIT-SHM
[ 45.253] (II) Initializing built-in extension XInputExtension
[ 45.253] (II) Initializing built-in extension XTEST
[ 45.253] (II) Initializing built-in extension BIG-REQUESTS
[ 45.253] (II) Initializing built-in extension SYNC
[ 45.253] (II) Initializing built-in extension XKEYBOARD
[ 45.253] (II) Initializing built-in extension XC-MISC
[ 45.253] (II) Initializing built-in extension SECURITY
[ 45.253] (II) Initializing built-in extension XINERAMA
[ 45.253] (II) Initializing built-in extension XFIXES
[ 45.253] (II) Initializing built-in extension RENDER
[ 45.253] (II) Initializing built-in extension RANDR
[ 45.253] (II) Initializing built-in extension COMPOSITE
[ 45.253] (II) Initializing built-in extension DAMAGE
[ 45.264] (II) AIGLX: Screen 0 is not DRI2 capable
[ 45.264] (II) AIGLX: Screen 0 is not DRI capable
[ 45.274] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[ 45.274] (EE) GLX: could not load software renderer
[ 45.274] (II) GLX: no usable GL providers found for screen 0
[ 45.275] (II) RADEON(0): Setting screen physical size to 381 x 238
[ 45.325] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 45.335] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 45.335] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.335] (II) LoadModule: "evdev"
[ 45.336] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.360] (II) Module evdev: vendor="X.Org Foundation"
[ 45.360] compiled for 1.11.3, module version = 2.7.0
[ 45.360] Module class: X.Org XInput Driver
[ 45.360] ABI class: X.Org XInput driver, version 16.0
[ 45.360] (II) Using input driver 'evdev' for 'Power Button'
[ 45.360] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.360] (**) Power Button: always reports core events
[ 45.360] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 45.360] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 45.360] (--) evdev: Power Button: Found keys
[ 45.360] (II) evdev: Power Button: Configuring as keyboard
[ 45.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 45.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 45.361] (**) Option "xkb_rules" "evdev"
[ 45.361] (**) Option "xkb_model" "pc105"
[ 45.361] (**) Option "xkb_layout" "us"
[ 45.361] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 45.361] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 45.361] (II) Using input driver 'evdev' for 'Sleep Button'
[ 45.361] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.362] (**) Sleep Button: always reports core events
[ 45.362] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 45.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 45.362] (--) evdev: Sleep Button: Found keys
[ 45.362] (II) evdev: Sleep Button: Configuring as keyboard
[ 45.362] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input3/event3"
[ 45.362] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 45.362] (**) Option "xkb_rules" "evdev"
[ 45.362] (**) Option "xkb_model" "pc105"
[ 45.362] (**) Option "xkb_layout" "us"
[ 45.362] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 45.362] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 45.362] (II) Using input driver 'evdev' for 'Video Bus'
[ 45.362] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.363] (**) Video Bus: always reports core events
[ 45.363] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 45.363] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 45.363] (--) evdev: Video Bus: Found keys
[ 45.363] (II) evdev: Video Bus: Configuring as keyboard
[ 45.363] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input5/event5"
[ 45.363] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 45.363] (**) Option "xkb_rules" "evdev"
[ 45.363] (**) Option "xkb_model" "pc105"
[ 45.363] (**) Option "xkb_layout" "us"
[ 45.363] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 45.363] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.363] (II) Using input driver 'evdev' for 'Power Button'
[ 45.363] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.363] (**) Power Button: always reports core events
[ 45.363] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 45.364] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 45.364] (--) evdev: Power Button: Found keys
[ 45.364] (II) evdev: Power Button: Configuring as keyboard
[ 45.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 45.364] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 45.364] (**) Option "xkb_rules" "evdev"
[ 45.364] (**) Option "xkb_model" "pc105"
[ 45.364] (**) Option "xkb_layout" "us"
[ 45.364] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 45.364] (II) No input driver specified, ignoring this device.
[ 45.364] (II) This device may have been added with another device file.
[ 45.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 45.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 45.365] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 45.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.365] (**) AT Translated Set 2 keyboard: always reports core events
[ 45.365] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 45.365] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 45.365] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 45.365] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 45.365] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 45.365] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 45.365] (**) Option "xkb_rules" "evdev"
[ 45.365] (**) Option "xkb_model" "pc105"
[ 45.365] (**) Option "xkb_layout" "us"
[ 45.366] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 45.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 45.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 45.366] (II) LoadModule: "synaptics"
[ 45.366] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 45.373] (II) Module synaptics: vendor="X.Org Foundation"
[ 45.373] compiled for 1.11.3, module version = 1.6.2
[ 45.373] Module class: X.Org XInput Driver
[ 45.373] ABI class: X.Org XInput driver, version 16.0
[ 45.374] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 45.374] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 45.374] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 45.374] (**) Option "Device" "/dev/input/event6"
[ 45.374] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 45.374] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 45.374] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 45.374] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 45.374] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 45.374] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 45.374] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 45.374] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 45.374] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 45.374] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 45.374] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 45.374] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 45.374] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 45.374] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 45.374] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 45.374] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 45.374] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 45.375] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 45.375] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 45.375] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 45.377] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 45.377] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 45.377] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 45.377] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.377] (**) HP WMI hotkeys: always reports core events
[ 45.377] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[ 45.378] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 45.378] (--) evdev: HP WMI hotkeys: Found keys
[ 45.378] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 45.378] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 45.378] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 45.378] (**) Option "xkb_rules" "evdev"
[ 45.378] (**) Option "xkb_model" "pc105"
[ 45.378] (**) Option "xkb_layout" "us"
Looks like /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so is missing. Install libgl1-mesa-dri. (or the matching lts version of it if you have a newer x.)
@lembas
I entered this into the terminal:
$ sudo apt-get update
$ sudo apt-get install libl1-mesa-dri
Recommended that I install the following:
$ sudo apt-get install libglide3
All new packages installed with no issues.
Still won't go to the desktop on reboot. ? Not sure if I have a newer x. Not sure what an "x" is?
I guess that wasn't it then. The xserver is a thingy behind graphical operations in GNU/Linux https://en.wikipedia.org/wiki/Xserver
Trisquel is based on the lts (long term support) versions of ubuntu. Because (the kernel and) the xserver can be critical for hardware compatibility, there are backports of these from the non-lts ubuntu versions in between the lts releases. E.g.
xserver-xorg-lts-precise - X.Org X server
xserver-xorg-lts-quantal - X.Org X server
xserver-xorg-lts-raring - X.Org X server
xserver-xorg-lts-saucy - X.Org X server
xserver-xorg-lts-trusty - X.Org X server
If you haven't upgraded your x, then you've got the original precise stack. I don't know whether it would help but I guess it wouldn't hurt trying
https://trisquel.info/en/wiki/installing-latest-backported-kernel-and-xserver
Perhaps somebody else has better suggestions.
Well, not really. As I wrote earlier, we could check that /etc/init/lxdm.conf starts at runlevel 2 but I see no reason why this script would have been modified.
An idea: it may actually be that gnuby's system is not booting into runlevel 2. Let see: what is the output of the following command?
$ who -r
@Magic Banana
After running
$ who -r
I got the output:
run-level 2 2014-10-14 14:10
I'm not totally confident about installing the latest backported kernel and xserver, does anyone else think this is a good idea? If it is I'll do it.
That is the proper runlevel for a graphical boot... I don't think there can be a problem in the script but let see anyway: can you show us the beginning of /etc/init/lxdm.conf (the lines with "start on" and "stop on")?
Enabling Trusty's graphical stack is not hard nor dangerous (easy to revert if something becomes wrong but it should not: it is the graphical stack of a long-time-support version of Ubuntu after all!). However, it does not look like your graphical stack is the problem since 'sudo start lxdm' brings you the graphical login screen. It only looks like the 'init' does not automatically start LXDM for some reason.
Unless someone else has a solution, the fix I propose is to write 'start lxdm' in /etc/rc.local (before the 'exit' line).
@Magic Banana
This is what is in the beginning of /etc/init/lxdm.conf:
start on ((filesystem
and runlevel[!06]
and started dbus
and (drm-device-added card0 PRIMARY_DEVICE_FOR_DISPLAY=1
or stoppped udev-fallback-graphics))
or runlevel PREVLEVEL=S)
stop on runlevel [016]
Is the syntax as simple as the two words, when adding to /etc/rc.local, "start lxdm"?
The script is OK: it should start at runlevel 2 (in fact it starts at any runlevel but 0 and 6) and stop at runlevel 0, 1 and 6. Since you are at runlevel 2, I really do not understand why it does not start.
I think it could indeed work to write "start lxdm" before the 'exit' command of /etc/rc.local. If not, try writing "/etc/init.d/lxdm" (directly executing the init script).
@Magic Banana
This is pretty frustrating...sigh, still no progress. I used sudo vi to insert and save what you suggested into /etc/rc.local. Then rebooted, still coming up to terminal on boot.
Is there any harm in using sudo service lxdm start longterm? I was hoping to take this laptop with me on a trip, and at this point I don't have much more time to invest fiddling with it. It's inconvenient, but with just a couple extra steps I do manage to get to the desktop where I can use Midori...I just want to be able to check my email while away... ):(
No harm whatsoever. We precisely try to automatically execute that command at init!
By the way, you can more simply write:
$ sudo start lxdm
In fact, you probably simply want to directly start the graphical session (without the login screen). I believe the following command does so:
$ starlxde
- Anmelden oder Registrieren um Kommentare zu schreiben