Trisquel Live asks for login and password

I don't know MultiSystem,but have you tried to create the usb disk using the usb-creator-gtk tool included in trisquel?

You can find it in System -> Administration -> Startup Disk Creator.

Actually, no. I will try to use usb-creator-gtk in Ubuntu as I'm working in the system now.

UPDATED.
I've tried, but with the same result - I was asked for login and password.

Maybe information about my laptop could give a clue what to do:
HP ProBook 4510s,
Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz,
4GiB DDR2,
-PCI Devices-

Host bridge : Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
PCI bridge : Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) (prog-if 00 [Normal decode])
USB Controller : Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
USB Controller : Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
USB Controller : Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
USB Controller : Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Audio device : Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
PCI bridge : Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
USB Controller : Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
USB Controller : Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
USB Controller : Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
USB Controller : Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
PCI bridge : Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
ISA bridge : Intel Corporation ICH9M LPC Interface Controller (rev 03)
SATA controller : Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
VGA compatible controller : ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] (prog-if 00 [VGA controller])
Audio device : ATI Technologies Inc RV710/730
Network controller : Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
Ethernet controller : Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 10)

Aklis, I've noticed a note "needs more info", could you please specify what information I should provide?

The status change was before the try with usb-creator, now i think we got all the info.

Just one thing more, are you using 32 or 64 bits version?

On my laptop I have Ubuntu 11.10 (32 bit), and Trisquel, which I tried to test, is Trisquel 5.0 (1,5Gb DVD iso image, 32 bit).

Problem: Trisquel Live requests an Account & Password to login
Request: "guest" account "password"

History:
I downloaded trisquel_6.0.1_i686.iso
burned a disk
ran Disc check OK-3 minutes
ran MemTest86 v4.10 OK-44 minutesESCaped
ran Trisquel Live ... noted error msgs ... firmware not found
splash screen OK
prompt "other" in drop-box appears

Actions:
Created forum account
Searched forum for "login"
Found "Submitted by dkharma on 9 December, 2011 - 23:16" ACTION
Re-Posted "Trisquel Live asks for login and password"

The missing firmware is not unusual depending on your hardware. Try this, reboot from the live media and wait until you get to the login part. Then hit Ctrl+Alt+F1 to get to virtual terminal 1 and then punch in

cd Desktop

(note the capital D) followed by

cp /var/log/syslog .

(do not overlook the tailing dot)

Then enter the command

sudo service gdm restart

Once the GUI fires up, please attach the syslog on your desktop to this bug, it might help us figure out what's wrong.

(In the future you only need to use the last command to get to the GUI.)

Thank you, for the help. I did invest some time so progress is welcome, perhaps the bug report is also welcome so new users have an easier time.

I hope the attached file helps. I did start with an older lap-top HP-nx9420 before installing and moving on to the desk-top.

note: No Problem booting from LiveUSB
Followed http://trisquel.info/en/wiki/how-create-liveusb
Problem only booting from DVD.

Regards
P.S. not sure who updates status RESOLVED