graphics card set - Silicon Integrated Systems
I would like configure my graphics card, but i don't know how do it.
I don't know the trademark of my card, only know intel XD
I want trisquel by the freedom Thanks.
looks like my desk : https://mediacru.sh/sgTn4TD94PZb.png
lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:09.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller
00:09.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller
00:09.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
mauro@mauro-M730SR:~$
thanks
What's wrong or what are you trying to do? You can read the manual page for the driver, it's called sis.
man sis
thanks, the problem was the resolution of monitor,the solution is edit xorg.conf
sudo gedit /etc/X11/xorg.conf
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1440x900"
Horizsync 31.5-64.0
Vertrefresh 56.0 - 65.0
modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
Gamma 1.0
# modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
# modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
# modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection
reboot pc
thanks, i love trisquel