Logs rapidly filling up root partition after upgrade

Can you post some lines of those files?

Perhaps expand the root partition for the time being?

or try: aptitude autoclean
And delete only the older files

Or perhaps try: logrotate
(To rotate the logs)

But first you need to determine what is creating this issue (tail -f /var/log/syslog), so you need to copy and paste the logs please.

EDIT: I should have included in the original bug report a link to the forum discussion on this:
https://trisquel.info/en/forum/root-partition-filled-after-upgrade-6-7

Thanks for the suggestions MeNoMore. However...

>> Perhaps expand the root partition for the time being? <<

Making the partition larger would give me more time before I have to delete the logs to make space, but less space in my /home partition. Also it's a bit like suggesting using a pot to move the sea instead of a spoon :P

As mentioned in the forums, I currently have a 16GB OS partition. Let's say I turn on the laptop at 7pm (having deleted all the huge logs the night before). At this point, 6.1GB of the OS partition is used, with 8.5 BG free. By 7:20pm, 6.7GB is used, with 7.9GB free. By 7:30, 7.1GB is used. At this rate (about 2GB per hour), assuming I don't install any more software, the OS partition will be filled after every 4 hours of runtime.

>> or try: aptitude autoclean
And delete only the older files <<

Assuming this does the same thing as "sudo apt-get autoclean", I have done this. See here:
https://trisquel.info/en/forum/root-partition-filled-after-upgrade-6-7#comment-80086

Didn't clear enough to space to make any difference.

>> Or perhaps try: logrotate
(To rotate the logs) <<

Can you explain this in more detail, maybe on the forum post (linked above)?

>> But first you need to determine what is creating this issue (tail -f /var/log/syslog), so you need to copy and paste the logs please. <<

Willdo. Just running the system for a while to regenerate the cancerous logs. I deleted them all last night before I shut down, in case they prevented the machine from booting.

EDIT: The log files which seem to be affected are: auth.log, dmesg, kern.log, syslog, and Xorg.0.log.

/var/log/Auth.log:

Oct 25 16:20:07 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 25 16:20:11 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/sbin/reboot
Oct 25 16:20:11 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 25 16:20:11 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 25 16:22:54 PILOT sshd[897]: Server listening on 0.0.0.0 port 22.
Oct 25 16:22:54 PILOT sshd[897]: Server listening on :: port 22.
Oct 25 16:22:54 PILOT systemd-logind[1102]: New seat seat0.
Oct 25 16:22:54 PILOT systemd-logind[1102]: Watching system buttons on /dev/input/event2 (Power Button)
Oct 25 16:22:54 PILOT systemd-logind[1102]: Watching system buttons on /dev/input/event7 (Fujitsu FUJ02E3)
Oct 25 16:22:54 PILOT systemd-logind[1102]: Watching system buttons on /dev/input/event4 (Video Bus)
Oct 25 16:22:54 PILOT systemd-logind[1102]: Watching system buttons on /dev/input/event6 (Fujitsu FUJ02B1)
Oct 25 16:22:54 PILOT systemd-logind[1102]: Watching system buttons on /dev/input/event8 (Fujitsu FUJ02BF)
Oct 25 16:22:54 PILOT systemd-logind[1102]: Watching system buttons on /dev/input/event1 (Power Button)
Oct 25 16:22:54 PILOT systemd-logind[1102]: Watching system buttons on /dev/input/event0 (Lid Switch)
Oct 25 16:22:58 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 25 16:22:58 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 25 16:22:59 PILOT lightdm: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Oct 25 16:22:59 PILOT systemd-logind[1102]: New session c1 of user lightdm.
Oct 25 16:22:59 PILOT systemd-logind[1102]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
Oct 25 16:22:59 PILOT lightdm: pam_ck_connector(lightdm-greeter:session): nox11 mode, ignoring PAM_TTY :0
Oct 25 16:23:03 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 25 16:23:03 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 25 16:23:03 PILOT lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "strypey"
Oct 25 16:23:14 PILOT lightdm: pam_unix(lightdm-greeter:session): session closed for user lightdm
Oct 25 16:23:14 PILOT lightdm: pam_unix(lightdm:session): session opened for user strypey by (uid=0)
Oct 25 16:23:14 PILOT systemd-logind[1102]: New session c2 of user strypey.
Oct 25 16:23:14 PILOT systemd-logind[1102]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Oct 25 16:23:14 PILOT lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0
Oct 25 16:23:15 PILOT dbus[899]: [system] Rejected send message, 7 matched rules; type="method_return", sender=":1.50" (uid=0 pid=1575 comm="/usr/sbin/dnsmasq --no-resolv --keep-in-foreground") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.6" (uid=0 pid=1145 comm="NetworkManager ")
Oct 25 16:23:19 PILOT gnome-keyring-daemon[1566]: Gkm: using old keyring directory: /home/strypey/.gnome2/keyrings
Oct 25 16:23:23 PILOT polkitd(authority=local): Registered Authentication Agent for unix-session:c2 (system bus name :1.79 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_NZ.UTF-8)
Oct 25 16:23:54 PILOT systemd-logind[1102]: Removed session c1.
Oct 25 17:17:03 PILOT CRON[2295]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 25 17:17:03 PILOT CRON[2295]: pam_unix(cron:session): session closed for user root
Oct 25 17:33:20 PILOT smbd[2328]: pam_unix(samba:session): session closed for user nobody
Oct 25 17:38:02 PILOT smbd[2335]: pam_unix(samba:session): session closed for user nobody
Oct 25 17:59:27 PILOT smbd[2366]: pam_unix(samba:session): session closed for user nobody
Oct 25 17:59:32 PILOT smbd[2365]: pam_unix(samba:session): session closed for user nobody
Oct 25 17:59:32 PILOT smbd[2367]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:17:02 PILOT CRON[2390]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 25 18:17:03 PILOT CRON[2390]: pam_unix(cron:session): session closed for user root
Oct 25 18:20:41 PILOT smbd[2398]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:23:42 PILOT smbd[2403]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:26:40 PILOT smbd[2407]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:29:42 PILOT smbd[2411]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:31:27 PILOT smbd[2415]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:31:27 PILOT smbd[2414]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:31:38 PILOT smbd[2416]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:32:40 PILOT smbd[2418]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:35:42 PILOT smbd[2424]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:38:40 PILOT smbd[2428]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:39:36 PILOT smbd[2430]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:41:42 PILOT smbd[2434]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:44:40 PILOT smbd[2439]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:47:42 PILOT smbd[2444]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:50:40 PILOT smbd[2452]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:53:42 PILOT smbd[2457]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:56:40 PILOT smbd[2461]: pam_unix(samba:session): session closed for user nobody
Oct 25 18:59:42 PILOT smbd[2466]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:02:40 PILOT smbd[2470]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:05:42 PILOT smbd[2475]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:08:40 PILOT smbd[2479]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:11:42 PILOT smbd[2483]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:14:40 PILOT smbd[2489]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:17:02 PILOT CRON[2492]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 25 19:17:02 PILOT CRON[2492]: pam_unix(cron:session): session closed for user root
Oct 25 19:17:42 PILOT smbd[2496]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:20:40 PILOT smbd[2501]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:23:42 PILOT smbd[2506]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:26:40 PILOT smbd[2511]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:29:42 PILOT smbd[2515]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:32:40 PILOT smbd[2519]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:35:42 PILOT smbd[2524]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:38:40 PILOT smbd[2530]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:41:42 PILOT smbd[2534]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:44:40 PILOT smbd[2539]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:47:42 PILOT smbd[2543]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:50:41 PILOT smbd[2548]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:53:42 PILOT smbd[2554]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:56:44 PILOT smbd[2580]: pam_unix(samba:session): session closed for user nobody
Oct 25 19:59:43 PILOT smbd[2609]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:02:43 PILOT smbd[2641]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:05:46 PILOT smbd[2675]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:08:41 PILOT smbd[2707]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:11:47 PILOT smbd[2736]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:14:46 PILOT smbd[2766]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:17:05 PILOT CRON[2788]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 25 20:17:13 PILOT CRON[2788]: pam_unix(cron:session): session closed for user root
Oct 25 20:17:45 PILOT smbd[2799]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:20:44 PILOT smbd[2825]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:23:45 PILOT smbd[2857]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:26:40 PILOT smbd[2890]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:29:45 PILOT smbd[2926]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:32:44 PILOT smbd[2962]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:35:43 PILOT smbd[2997]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:38:42 PILOT smbd[3031]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:41:45 PILOT smbd[3065]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:44:42 PILOT smbd[3102]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:47:44 PILOT smbd[3133]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:50:41 PILOT smbd[3166]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:53:42 PILOT smbd[3202]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:56:44 PILOT smbd[3232]: pam_unix(samba:session): session closed for user nobody
Oct 25 20:59:47 PILOT smbd[3262]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:02:43 PILOT smbd[3289]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:05:45 PILOT smbd[3318]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:08:42 PILOT smbd[3347]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:11:45 PILOT smbd[3383]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:14:41 PILOT smbd[3417]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:17:03 PILOT CRON[3441]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 25 21:17:03 PILOT CRON[3441]: pam_unix(cron:session): session closed for user root
Oct 25 21:17:45 PILOT smbd[3452]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:20:43 PILOT smbd[3478]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:23:45 PILOT smbd[3510]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:26:43 PILOT smbd[3535]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:29:43 PILOT smbd[3567]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:32:42 PILOT smbd[3592]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:35:45 PILOT smbd[3628]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:38:40 PILOT smbd[3662]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:41:45 PILOT smbd[3691]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:44:43 PILOT smbd[3717]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:47:46 PILOT smbd[3748]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:50:44 PILOT smbd[3783]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:53:45 PILOT smbd[3814]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:56:41 PILOT smbd[3838]: pam_unix(samba:session): session closed for user nobody
Oct 25 21:59:43 PILOT smbd[3868]: pam_unix(samba:session): session closed for user nobody
Oct 25 22:02:42 PILOT smbd[3899]: pam_unix(samba:session): session closed for user nobody
Oct 25 22:05:43 PILOT smbd[3935]: pam_unix(samba:session): session closed for user nobody
Oct 25 22:08:43 PILOT smbd[3955]: pam_unix(samba:session): session closed for user nobody
Oct 25 22:11:45 PILOT smbd[3988]: pam_unix(samba:session): session closed for user nobody
Oct 25 22:13:55 PIOct 25 22:59:58 PILOT sshd[895]: Server listening on 0.0.0.0 port 22.
Oct 25 22:59:58 PILOT sshd[895]: Server listening on :: port 22.
Oct 25 22:59:59 PILOT systemd-logind[1126]: New seat seat0.
Oct 25 22:59:59 PILOT systemd-logind[1126]: Watching system buttons on /dev/input/event2 (Power Button)
Oct 25 22:59:59 PILOT systemd-logind[1126]: Watching system buttons on /dev/input/event7 (Fujitsu FUJ02E3)
Oct 25 22:59:59 PILOT systemd-logind[1126]: Watching system buttons on /dev/input/event4 (Video Bus)
Oct 25 22:59:59 PILOT systemd-logind[1126]: Watching system buttons on /dev/input/event6 (Fujitsu FUJ02B1)
Oct 25 22:59:59 PILOT systemd-logind[1126]: Watching system buttons on /dev/input/event8 (Fujitsu FUJ02BF)
Oct 25 22:59:59 PILOT systemd-logind[1126]: Watching system buttons on /dev/input/event1 (Power Button)
Oct 25 22:59:59 PILOT systemd-logind[1126]: Watching system buttons on /dev/input/event0 (Lid Switch)
Oct 25 23:00:03 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 25 23:00:03 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 25 23:00:04 PILOT lightdm: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Oct 25 23:00:04 PILOT systemd-logind[1126]: New session c1 of user lightdm.
Oct 25 23:00:04 PILOT systemd-logind[1126]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
Oct 25 23:00:04 PILOT lightdm: pam_ck_connector(lightdm-greeter:session): nox11 mode, ignoring PAM_TTY :0
Oct 25 23:00:08 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 25 23:00:08 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 25 23:00:08 PILOT lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "strypey"
Oct 25 23:00:19 PILOT lightdm: pam_unix(lightdm-greeter:session): session closed for user lightdm
Oct 25 23:00:19 PILOT lightdm: pam_unix(lightdm:session): session opened for user strypey by (uid=0)
Oct 25 23:00:19 PILOT systemd-logind[1126]: New session c2 of user strypey.
Oct 25 23:00:19 PILOT systemd-logind[1126]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Oct 25 23:00:19 PILOT lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0
Oct 25 23:00:19 PILOT dbus[860]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.50" (uid=114 pid=1532 comm="/usr/lib/i386-linux-gnu/indicator-bluetooth/indica") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.2" (uid=0 pid=1100 comm="/usr/sbin/bluetoothd ")
Oct 25 23:00:19 PILOT dbus[860]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.50" (uid=114 pid=1532 comm="/usr/lib/i386-linux-gnu/indicator-bluetooth/indica") interface="org.bluez.Manager" member="DefaultAdapter" error name="(unset)" requested_reply="0" destination="org.bluez" (uid=0 pid=1100 comm="/usr/sbin/bluetoothd ")
Oct 25 23:00:23 PILOT gnome-keyring-daemon[1534]: Gkm: using old keyring directory: /home/strypey/.gnome2/keyrings
Oct 25 23:00:27 PILOT polkitd(authority=local): Registered Authentication Agent for unix-session:c2 (system bus name :1.78 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_NZ.UTF-8)
Oct 25 23:01:01 PILOT systemd-logind[1126]: Removed session c1.
Oct 25 23:17:02 PILOT CRON[2089]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 25 23:17:02 PILOT CRON[2089]: pam_unix(cron:session): session closed for user root
Oct 26 00:17:05 PILOT CRON[2317]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 26 00:17:15 PILOT CRON[2317]: pam_unix(cron:session): session closed for user root
Oct 26 01:17:03 PILOT CRON[3015]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 26 01:17:05 PILOT CRON[3015]: pam_unix(cron:session): session closed for user root
Oct 26 02:17:05 PILOT CRON[3753]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 26 02:17:05 PILOT CRON[3753]: pam_unix(cron:session): session closed for user root
Oct 26 03:17:01 PILOT CRON[4197]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 26 03:17:01 PILOT CRON[4197]: pam_unix(cron:session): session closed for user root
Oct 26 03:45:58 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/bin/rm /var/log/syslog
Oct 26 03:45:58 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 03:45:58 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 03:46:05 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/bin/rm /var/log/kern.log
Oct 26 03:46:05 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 03:46:05 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 03:46:16 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/bin/rm /var/log/syslog.1
Oct 26 03:46:16 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 03:46:16 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 03:46:28 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/bin/rm /var/log/kern.log.1
Oct 26 03:46:28 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 03:46:28 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 03:46:35 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/bin/rm /var/log/lastlog
Oct 26 03:46:35 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 03:46:35 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 03:46:50 PILOT polkitd(authority=local): Unregistered Authentication Agent for unix-session:c2 (system bus name :1.78, object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_NZ.UTF-8) (disconnected from bus)
Oct 26 03:46:54 PILOT systemd-logind[1126]: System is powering down.
Oct 26 03:46:54 PILOT systemd-logind[1126]: Operation finished.
Oct 26 18:59:46 PILOT systemd-logind[1072]: New seat seat0.
Oct 26 18:59:46 PILOT systemd-logind[1072]: Watching system buttons on /dev/input/event2 (Power Button)
Oct 26 18:59:46 PILOT systemd-logind[1072]: Watching system buttons on /dev/input/event7 (Fujitsu FUJ02E3)
Oct 26 18:59:46 PILOT systemd-logind[1072]: Watching system buttons on /dev/input/event4 (Video Bus)
Oct 26 18:59:46 PILOT systemd-logind[1072]: Watching system buttons on /dev/input/event6 (Fujitsu FUJ02B1)
Oct 26 18:59:46 PILOT systemd-logind[1072]: Watching system buttons on /dev/input/event8 (Fujitsu FUJ02BF)
Oct 26 18:59:46 PILOT systemd-logind[1072]: Watching system buttons on /dev/input/event1 (Power Button)
Oct 26 18:59:46 PILOT systemd-logind[1072]: Watching system buttons on /dev/input/event0 (Lid Switch)
Oct 26 18:59:46 PILOT sshd[894]: Server listening on 0.0.0.0 port 22.
Oct 26 18:59:46 PILOT sshd[894]: Server listening on :: port 22.
Oct 26 18:59:51 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 26 18:59:51 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 26 18:59:51 PILOT lightdm: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Oct 26 18:59:51 PILOT systemd-logind[1072]: New session c1 of user lightdm.
Oct 26 18:59:51 PILOT systemd-logind[1072]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
Oct 26 18:59:51 PILOT lightdm: pam_ck_connector(lightdm-greeter:session): nox11 mode, ignoring PAM_TTY :0
Oct 26 18:59:56 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 26 18:59:56 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 26 18:59:56 PILOT lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "strypey"
Oct 26 19:03:28 PILOT lightdm: pam_unix(lightdm-greeter:session): session closed for user lightdm
Oct 26 19:03:28 PILOT lightdm: pam_unix(lightdm:session): session opened for user strypey by (uid=0)
Oct 26 19:03:28 PILOT systemd-logind[1072]: New session c2 of user strypey.
Oct 26 19:03:28 PILOT systemd-logind[1072]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Oct 26 19:03:28 PILOT lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0
Oct 26 19:03:32 PILOT gnome-keyring-daemon[1597]: Gkm: using old keyring directory: /home/strypey/.gnome2/keyrings
Oct 26 19:03:36 PILOT polkitd(authority=local): Registered Authentication Agent for unix-session:c2 (system bus name :1.76 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_NZ.UTF-8)
Oct 26 19:04:28 PILOT systemd-logind[1072]: Removed session c1.
Oct 26 19:17:02 PILOT CRON[2389]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 26 19:17:02 PILOT CRON[2389]: pam_unix(cron:session): session closed for user root
Oct 26 19:40:51 PILOT polkitd(authority=local): Unregistered Authentication Agent for unix-session:c2 (system bus name :1.76, object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_NZ.UTF-8) (disconnected from bus)
Oct 26 19:40:54 PILOT systemd-logind[1072]: System is powering down.
Oct 26 19:40:55 PILOT systemd-logind[1072]: Operation finished.
Oct 26 20:07:15 PILOT sshd[898]: Server listening on 0.0.0.0 port 22.
Oct 26 20:07:15 PILOT sshd[898]: Server listening on :: port 22.
Oct 26 20:07:16 PILOT systemd-logind[1061]: New seat seat0.
Oct 26 20:07:16 PILOT systemd-logind[1061]: Watching system buttons on /dev/input/event2 (Power Button)
Oct 26 20:07:16 PILOT systemd-logind[1061]: Watching system buttons on /dev/input/event7 (Fujitsu FUJ02E3)
Oct 26 20:07:16 PILOT systemd-logind[1061]: Watching system buttons on /dev/input/event4 (Video Bus)
Oct 26 20:07:16 PILOT systemd-logind[1061]: Watching system buttons on /dev/input/event6 (Fujitsu FUJ02B1)
Oct 26 20:07:16 PILOT systemd-logind[1061]: Watching system buttons on /dev/input/event8 (Fujitsu FUJ02BF)
Oct 26 20:07:16 PILOT systemd-logind[1061]: Watching system buttons on /dev/input/event1 (Power Button)
Oct 26 20:07:16 PILOT systemd-logind[1061]: Watching system buttons on /dev/input/event0 (Lid Switch)
Oct 26 20:07:20 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 26 20:07:20 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 26 20:07:20 PILOT lightdm: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Oct 26 20:07:20 PILOT systemd-logind[1061]: New session c1 of user lightdm.
Oct 26 20:07:20 PILOT systemd-logind[1061]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
Oct 26 20:07:20 PILOT lightdm: pam_ck_connector(lightdm-greeter:session): nox11 mode, ignoring PAM_TTY :0
Oct 26 20:07:25 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 26 20:07:25 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 26 20:07:25 PILOT lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "strypey"
Oct 26 20:07:37 PILOT dbus[866]: [system] Rejected send message, 7 matched rules; type="method_return", sender=":1.49" (uid=0 pid=1525 comm="/usr/sbin/dnsmasq --no-resolv --keep-in-foreground") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.8" (uid=0 pid=1157 comm="NetworkManager ")
Oct 26 20:17:01 PILOT CRON[1683]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 26 20:17:01 PILOT CRON[1683]: pam_unix(cron:session): session closed for user root
Oct 26 20:19:51 PILOT lightdm: pam_unix(lightdm:auth): authentication failure; logname= uid=0 euid=0 tty=:0 ruser= rhost= user=strypey
Oct 26 20:19:53 PILOT lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Oct 26 20:19:53 PILOT lightdm: PAM adding faulty module: pam_kwallet.so
Oct 26 20:19:53 PILOT lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "strypey"
Oct 26 20:19:59 PILOT lightdm: pam_unix(lightdm-greeter:session): session closed for user lightdm
Oct 26 20:19:59 PILOT lightdm: pam_unix(lightdm:session): session opened for user strypey by (uid=0)
Oct 26 20:19:59 PILOT systemd-logind[1061]: New session c2 of user strypey.
Oct 26 20:19:59 PILOT systemd-logind[1061]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Oct 26 20:19:59 PILOT lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0
Oct 26 20:20:03 PILOT gnome-keyring-daemon[1699]: Gkm: using old keyring directory: /home/strypey/.gnome2/keyrings
Oct 26 20:20:07 PILOT polkitd(authority=local): Registered Authentication Agent for unix-session:c2 (system bus name :1.80 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_NZ.UTF-8)
Oct 26 20:21:00 PILOT systemd-logind[1061]: Removed session c1.
Oct 26 20:21:50 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/usr/bin/apt-get update
Oct 26 20:21:50 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 20:22:09 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 20:22:09 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/usr/bin/apt-get upgrade -y
Oct 26 20:22:09 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 20:22:12 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 20:23:51 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/bin/ls /var/logs/
Oct 26 20:23:51 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 20:23:51 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 20:23:55 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/bin/ls /var/log/
Oct 26 20:23:55 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 20:23:55 PILOT sudo: pam_unix(sudo:session): session closed for user root
Oct 26 20:26:13 PILOT sudo: strypey : TTY=pts/0 ; PWD=/home/strypey ; USER=root ; COMMAND=/bin/ls -l /var/log/
Oct 26 20:26:13 PILOT sudo: pam_unix(sudo:session): session opened for user root by strypey(uid=0)
Oct 26 20:26:13 PILOT sudo: pam_unix(sudo:session): session closed for user root

/var/log/dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-66-generic (name at domain) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #108+7.0trisquel2 SMP Tue Oct 20 07:37:07 UTC 2015 (Ubuntu 3.13.0-66.108+7.0trisquel2-generic 3.13.11-ckt27-gnu)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f63ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f640000-0x000000007f650fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f651000-0x000000007f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: FUJITSU LifeBook T4215/FJNB1B9, BIOS Version 1.14 05/07/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f640 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 2039M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01ba1000, 0x01ba1fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35518000-0x36a83fff]
[ 0.000000] ACPI: RSDP 000f5fb0 000014 (v00 FUJ )
[ 0.000000] ACPI: RSDT 7f6497d0 000044 (v01 FUJ PC 01140000 FUJ 00000100)
[ 0.000000] ACPI: FACP 7f650f8c 000074 (v01 FUJ PC 01140000 FUJ 00000100)
[ 0.000000] ACPI: DSDT 7f649824 00670D (v01 FUJ FJNB1B9 01140000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7f651fc0 000040
[ 0.000000] ACPI: MCFG 7f64ff31 00003C (v01 FUJ FJNB1B9 01140000 FUJ 00000100)
[ 0.000000] ACPI: SSDT 7f64ff6d 0004DC (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f650b1d 000231 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.000000] ACPI: APIC 7f650d4e 000068 (v01 FUJ FJNB1B9 01140000 LTP 00000000)
[ 0.000000] ACPI: HPET 7f650db6 000038 (v01 FUJ FJNB1B9 01140000 FUJ 00000100)
[ 0.000000] ACPI: BOOT 7f650dee 000028 (v01 FUJ FJNB1B9 01140000 FUJ 00000100)
[ 0.000000] ACPI: SLIC 7f650e16 000176 (v01 FUJ PC 01140000 FUJ 00000100)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1146MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01ba2000, 0x01ba2fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7f63ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7f63ffff]
[ 0.000000] On node 0 totalpages: 521694
[ 0.000000] free_area_init_node: node 0, pgdat c19a7c80, node_mem_map f6c0e020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2293 pages used for memmap
[ 0.000000] HighMem zone: 293442 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6be6000 s35520 r0 d21824 u57344
[ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519910
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-66-generic root=UUID=665af512-de2d-46e6-931c-48099c6048c0 ro quiet splash nomdmonddf nomdmonisw vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4174328 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f640)
[ 0.000000] Memory: 2031492K/2086776K available (6587K kernel code, 643K rwdata, 2764K rodata, 880K init, 924K bss, 55284K reserved, 1173768K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19c5000 - 0xc1aa1000 ( 880 kB)
[ 0.000000] .data : 0xc166f080 - 0xc19c4c00 (3414 kB)
[ 0.000000] .text : 0xc1000000 - 0xc166f080 (6588 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1994.991 MHz processor
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.98 BogoMIPS (lpj=7979964)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004042] Security Framework initialized
[ 0.004067] AppArmor: AppArmor initialized
[ 0.004068] Yama: becoming mindful.
[ 0.004128] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004131] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004437] Initializing cgroup subsys memory
[ 0.004446] Initializing cgroup subsys devices
[ 0.004450] Initializing cgroup subsys freezer
[ 0.004453] Initializing cgroup subsys blkio
[ 0.004456] Initializing cgroup subsys bfqio
[ 0.004460] Initializing cgroup subsys perf_event
[ 0.004463] Initializing cgroup subsys hugetlb
[ 0.004497] CPU: Physical Processor ID: 0
[ 0.004499] CPU: Processor Core ID: 0
[ 0.004503] mce: CPU supports 6 MCE banks
[ 0.004513] CPU0: Thermal monitoring enabled (TM2)
[ 0.004517] process: using mwait in idle threads
[ 0.004530] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.004530] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.004530] tlb_flushall_shift: -1
[ 0.004895] Freeing SMP alternatives memory: 32K (c1aa1000 - c1aa9000)
[ 0.006081] ACPI: Core revision 20131115
[ 0.011955] ACPI: All ACPI Tables successfully acquired
[ 0.012018] ftrace: allocating 27987 entries in 55 pages
[ 0.024100] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067663] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
[ 0.068000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] CPU 1 irqstacks, hard=f4cec000 soft=f4cee000
[ 0.068000] x86: Booting SMP configuration:
[ 0.008000] Initializing CPU#1
[ 0.068000] .... node #0, CPUs: #1
[ 0.079596] x86: Booted up 1 node, 2 CPUs
[ 0.079602] smpboot: Total of 2 processors activated (7979.96 BogoMIPS)
[ 0.079700] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080130] devtmpfs: initialized
[ 0.080323] EVM: security.selinux
[ 0.080325] EVM: security.SMACK64
[ 0.080327] EVM: security.ima
[ 0.080329] EVM: security.capability
[ 0.080363] PM: Registering ACPI NVS region [mem 0x7f651000-0x7f6fffff] (716800 bytes)
[ 0.080363] pinctrl core: initialized pinctrl subsystem
[ 0.080363] regulator-dummy: no parameters
[ 0.080368] RTC time: 7:06:50, date: 10/26/15
[ 0.080420] NET: Registered protocol family 16
[ 0.080670] EISA bus registered
[ 0.080673] cpuidle: using governor ladder
[ 0.080675] cpuidle: using governor menu
[ 0.080818] ACPI: bus type PCI registered
[ 0.080822] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.080908] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.080912] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.080913] PCI: Using MMCONFIG for extended config space
[ 0.080915] PCI: Using configuration type 1 for base access
[ 0.084078] bio: create slab at 0
[ 0.084118] ACPI: Added _OSI(Module Device)
[ 0.084121] ACPI: Added _OSI(Processor Device)
[ 0.084124] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.084126] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.086396] ACPI: SSDT 7f65160c 00084A (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.086898] ACPI: Dynamic OEM Table Load:
[ 0.086902] ACPI: SSDT (null) 00084A (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.088917] ACPI: SSDT 7f650449 0001E8 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.089258] ACPI: Dynamic OEM Table Load:
[ 0.089261] ACPI: SSDT (null) 0001E8 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.089369] ACPI: SSDT 7f6508c8 0001D0 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.089693] ACPI: Dynamic OEM Table Load:
[ 0.089696] ACPI: SSDT (null) 0001D0 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.089954] ACPI: SSDT 7f650841 000087 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.090285] ACPI: Dynamic OEM Table Load:
[ 0.090289] ACPI: SSDT (null) 000087 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.090382] ACPI: SSDT 7f650a98 000085 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.090705] ACPI: Dynamic OEM Table Load:
[ 0.090709] ACPI: SSDT (null) 000085 (v01 FUJ FJNB1B9 01140000 INTL 20050624)
[ 0.090953] ACPI: Interpreter enabled
[ 0.090966] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.090972] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.090989] ACPI: (supports S0 S3 S4 S5)
[ 0.090992] ACPI: Using IOAPIC for interrupt routing
[ 0.091022] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.091459] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.098785] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.098793] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.098800] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.099543] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.099547] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.099550] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.099554] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.099556] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.099560] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.099563] PCI: root bus 00: using default resources
[ 0.099567] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.099787] PCI host bridge to bus 0000:00
[ 0.099791] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.099794] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.099797] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.099809] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.099930] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.099945] pci 0000:00:02.0: reg 0x10: [mem 0xf0300000-0xf037ffff]
[ 0.099953] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.099960] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
[ 0.099968] pci 0000:00:02.0: reg 0x1c: [mem 0xf0400000-0xf043ffff]
[ 0.100089] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.100101] pci 0000:00:02.1: reg 0x10: [mem 0xf0380000-0xf03fffff]
[ 0.100281] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.100306] pci 0000:00:1b.0: reg 0x10: [mem 0xf0640000-0xf0643fff 64bit]
[ 0.100416] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.100484] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.100533] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.100649] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.100755] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.100861] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.100969] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.101075] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.101185] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.101244] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.101350] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.101393] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.101453] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.101557] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.101602] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.101661] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.101765] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.101810] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.101869] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
[ 0.101973] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.102028] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.102055] pci 0000:00:1d.7: reg 0x10: [mem 0xf0644000-0xf06443ff]
[ 0.102167] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.102244] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.102297] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.102427] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.102478] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.102597] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.102604] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.102609] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at fd00 (mask 007f)
[ 0.102614] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 06e8 (mask 0007)
[ 0.102741] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.102759] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.102772] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.102785] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.102798] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.102811] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 0.102933] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.102958] pci 0000:00:1f.2: reg 0x10: [io 0x18d0-0x18d7]
[ 0.102971] pci 0000:00:1f.2: reg 0x14: [io 0x18c4-0x18c7]
[ 0.102984] pci 0000:00:1f.2: reg 0x18: [io 0x18c8-0x18cf]
[ 0.102997] pci 0000:00:1f.2: reg 0x1c: [io 0x18c0-0x18c3]
[ 0.103010] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf]
[ 0.103024] pci 0000:00:1f.2: reg 0x24: [mem 0xf0644400-0xf06447ff]
[ 0.103085] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.103179] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.103255] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff]
[ 0.103504] pci 0000:02:00.0: [11ab:4363] type 00 class 0x020000
[ 0.103544] pci 0000:02:00.0: reg 0x10: [mem 0xf0000000-0xf0003fff 64bit]
[ 0.103564] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x20ff]
[ 0.103637] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.103752] pci 0000:02:00.0: supports D1 D2
[ 0.103755] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.103812] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.112025] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.112031] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.112037] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.112154] acpiphp: Slot [1] registered
[ 0.112164] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.112169] pci 0000:00:1c.1: bridge window [io 0x0000-0x0fff]
[ 0.112175] pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff]
[ 0.112184] pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.112390] pci 0000:05:00.0: [8086:4222] type 00 class 0x028000
[ 0.112448] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf0100fff]
[ 0.112873] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.112988] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.113028] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.113033] pci 0000:00:1c.2: bridge window [io 0x0000-0x0fff]
[ 0.113039] pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff]
[ 0.113048] pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.113119] pci 0000:08:03.0: [1217:7134] type 02 class 0x060700
[ 0.113147] pci 0000:08:03.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.113193] pci 0000:08:03.0: supports D1 D2
[ 0.113195] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113262] pci 0000:08:03.1: [1217:7134] type 02 class 0x060700
[ 0.113286] pci 0000:08:03.1: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.113331] pci 0000:08:03.1: supports D1 D2
[ 0.113334] pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113397] pci 0000:08:03.2: [1217:7120] type 00 class 0x080500
[ 0.113424] pci 0000:08:03.2: reg 0x10: [mem 0xf0201000-0xf02010ff]
[ 0.113544] pci 0000:08:03.2: supports D1 D2
[ 0.113547] pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113610] pci 0000:08:03.3: [1217:7130] type 00 class 0x068000
[ 0.113637] pci 0000:08:03.3: reg 0x10: [mem 0xf0200000-0xf0200fff]
[ 0.113759] pci 0000:08:03.3: supports D1 D2
[ 0.113761] pci 0000:08:03.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113866] pci 0000:00:1e.0: PCI bridge to [bus 08-09] (subtractive decode)
[ 0.113875] pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.113884] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.113887] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.113899] pci 0000:08:03.1: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.113961] pci_bus 0000:09: busn_res: can not insert [bus 09-ff] under [bus 08-09] (conflicts with (null) [bus 08-09])
[ 0.113968] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 0c
[ 0.113971] pci_bus 0000:09: busn_res: can not insert [bus 09-0c] under [bus 08-09] (conflicts with (null) [bus 08-09])
[ 0.113977] pci_bus 0000:09: [bus 09-0c] partially hidden behind transparent bridge 0000:08 [bus 08-09]
[ 0.114033] pci_bus 0000:0d: busn_res: can not insert [bus 0d-ff] under [bus 08-09] (conflicts with (null) [bus 08-09])
[ 0.114039] pci_bus 0000:0d: busn_res: [bus 0d-ff] end is updated to 10
[ 0.114042] pci_bus 0000:0d: busn_res: can not insert [bus 0d-10] under [bus 08-09] (conflicts with (null) [bus 08-09])
[ 0.114048] pci_bus 0000:0d: [bus 0d-10] partially hidden behind transparent bridge 0000:08 [bus 08-09]
[ 0.114090] pci_bus 0000:00: on NUMA node 0
[ 0.114679] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.114759] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.114836] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.114913] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.114989] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.115066] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.115141] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.115218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.115769] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.115778] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.115829] Found 1 acpi root devices
[ 0.115854] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.116019] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.116022] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.116030] vgaarb: loaded
[ 0.116032] vgaarb: bridge control possible 0000:00:02.0
[ 0.116260] SCSI subsystem initialized
[ 0.116280] libata version 3.00 loaded.
[ 0.116280] ACPI: bus type USB registered
[ 0.116280] usbcore: registered new interface driver usbfs
[ 0.116280] usbcore: registered new interface driver hub
[ 0.116280] usbcore: registered new device driver usb
[ 0.120082] PCI: Using ACPI for IRQ routing
[ 0.122475] PCI: pci_cache_line_size set to 64 bytes
[ 0.122499] pci 0000:05:00.0: no compatible bridge window for [mem 0xf0100000-0xf0100fff]
[ 0.122572] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.122575] e820: reserve RAM buffer [mem 0x7f640000-0x7fffffff]
[ 0.122693] NetLabel: Initializing
[ 0.122696] NetLabel: domain hash size = 128
[ 0.122697] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.122712] NetLabel: unlabeled traffic allowed by default
[ 0.122729] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.122729] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.122729] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.125016] Switched to clocksource hpet
[ 0.133705] AppArmor: AppArmor Filesystem Enabled
[ 0.133739] pnp: PnP ACPI init
[ 0.133756] ACPI: bus type PNP registered
[ 0.133847] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.133852] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134077] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.134081] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.134085] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.134088] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.134091] system 00:01: [io 0x1100-0x111f] has been reserved
[ 0.134095] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.134098] system 00:01: [io 0xf800-0xf87f] has been reserved
[ 0.134102] system 00:01: [io 0xf880-0xf8ff] has been reserved
[ 0.134105] system 00:01: [io 0xfc00-0xfc7f] has been reserved
[ 0.134108] system 00:01: [io 0xfc80-0xfcff] has been reserved
[ 0.134111] system 00:01: [io 0xfd0c-0xfd6f] has been reserved
[ 0.134115] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 0.134119] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.134122] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.134125] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.134131] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.134135] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.134138] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.134141] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.134145] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.134148] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.134152] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.134155] system 00:01: [mem 0x000cec00-0x000cefff] has been reserved
[ 0.134158] system 00:01: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.134162] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.134166] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134259] pnp 00:02: Plug and Play ACPI device, IDs FUJ02bf (active)
[ 0.134318] pnp 00:03: Plug and Play ACPI device, IDs FUJ02e5 (active)
[ 0.134378] pnp 00:04: [dma 4]
[ 0.134408] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.134471] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.134514] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.134564] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.134612] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.134659] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.134797] system 00:0a: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.134802] system 00:0a: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.135192] pnp 00:0b: [dma 3]
[ 0.135246] pnp 00:0b: Plug and Play ACPI device, IDs SMCf010 (active)
[ 0.135613] pnp: PnP ACPI: found 12 devices
[ 0.135615] ACPI: bus type PNP unregistered
[ 0.135619] PnPBIOS: Disabled by ACPI PNP
[ 0.173180] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
[ 0.173199] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-04] add_size 1000
[ 0.173203] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-04] add_size 200000
[ 0.173207] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03-04] add_size 200000
[ 0.173224] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.173228] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.173231] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff] to [bus 05] add_size 200000
[ 0.173260] pci 0000:08:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.173263] pci 0000:08:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.173267] pci 0000:08:03.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.173269] pci 0000:08:03.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.173273] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 08-09] add_size 1000
[ 0.173277] pci 0000:08:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.173280] pci 0000:08:03.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.173284] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 08-09] add_size 8000000
[ 0.173290] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.173295] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 8000000
[ 0.173298] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.173301] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.173304] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.173307] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 200000
[ 0.173311] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.173314] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.173317] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.173319] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.173327] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x87ffffff pref]
[ 0.173331] pci 0000:00:1c.0: BAR 15: assigned [mem 0x88000000-0x882fffff pref]
[ 0.173334] pci 0000:00:1c.1: BAR 14: assigned [mem 0x88300000-0x884fffff]
[ 0.173338] pci 0000:00:1c.1: BAR 15: assigned [mem 0x88500000-0x886fffff 64bit pref]
[ 0.173342] pci 0000:00:1c.2: BAR 14: assigned [mem 0x88700000-0x889fffff]
[ 0.173346] pci 0000:00:1c.2: BAR 15: assigned [mem 0x88a00000-0x88bfffff 64bit pref]
[ 0.173350] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.173354] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.173358] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.173364] pci 0000:02:00.0: BAR 6: assigned [mem 0x88000000-0x8801ffff pref]
[ 0.173368] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.173372] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.173379] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.173385] pci 0000:00:1c.0: bridge window [mem 0x88000000-0x882fffff pref]
[ 0.173393] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.173397] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.173404] pci 0000:00:1c.1: bridge window [mem 0x88300000-0x884fffff]
[ 0.173410] pci 0000:00:1c.1: bridge window [mem 0x88500000-0x886fffff 64bit pref]
[ 0.173419] pci 0000:05:00.0: BAR 0: assigned [mem 0x88700000-0x88700fff]
[ 0.173433] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.173437] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.173444] pci 0000:00:1c.2: bridge window [mem 0x88700000-0x889fffff]
[ 0.173450] pci 0000:00:1c.2: bridge window [mem 0x88a00000-0x88bfffff 64bit pref]
[ 0.173462] pci 0000:08:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.173466] pci 0000:08:03.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.173469] pci 0000:08:03.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.173472] pci 0000:08:03.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.173475] pci 0000:08:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.173478] pci 0000:08:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.173481] pci 0000:08:03.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.173483] pci 0000:08:03.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.173488] pci 0000:08:03.0: BAR 0: assigned [mem 0x8c000000-0x8c000fff]
[ 0.173495] pci 0000:08:03.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.173499] pci 0000:08:03.0: BAR 16: assigned [mem 0x90000000-0x93ffffff]
[ 0.173503] pci 0000:08:03.1: BAR 0: assigned [mem 0x94000000-0x94000fff]
[ 0.173510] pci 0000:08:03.1: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.173515] pci 0000:08:03.1: BAR 16: assigned [mem 0x98000000-0x9bffffff]
[ 0.173518] pci 0000:08:03.0: BAR 13: assigned [io 0x5000-0x50ff]
[ 0.173521] pci 0000:08:03.0: BAR 14: assigned [io 0x5400-0x54ff]
[ 0.173524] pci 0000:08:03.1: BAR 13: assigned [io 0x5800-0x58ff]
[ 0.173526] pci 0000:08:03.1: BAR 14: assigned [io 0x5c00-0x5cff]
[ 0.173530] pci 0000:08:03.0: CardBus bridge to [bus 09-0c]
[ 0.173533] pci 0000:08:03.0: bridge window [io 0x5000-0x50ff]
[ 0.173539] pci 0000:08:03.0: bridge window [io 0x5400-0x54ff]
[ 0.173546] pci 0000:08:03.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.173552] pci 0000:08:03.0: bridge window [mem 0x90000000-0x93ffffff]
[ 0.173557] pci 0000:08:03.1: CardBus bridge to [bus 0d-10]
[ 0.173560] pci 0000:08:03.1: bridge window [io 0x5800-0x58ff]
[ 0.173566] pci 0000:08:03.1: bridge window [io 0x5c00-0x5cff]
[ 0.173572] pci 0000:08:03.1: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.173579] pci 0000:08:03.1: bridge window [mem 0x98000000-0x9bffffff]
[ 0.173585] pci 0000:00:1e.0: PCI bridge to [bus 08-09]
[ 0.173589] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 0.173595] pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.173601] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x87ffffff pref]
[ 0.173610] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.173613] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.173616] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.173619] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.173622] pci_bus 0000:02: resource 2 [mem 0x88000000-0x882fffff pref]
[ 0.173625] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.173628] pci_bus 0000:03: resource 1 [mem 0x88300000-0x884fffff]
[ 0.173631] pci_bus 0000:03: resource 2 [mem 0x88500000-0x886fffff 64bit pref]
[ 0.173634] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.173636] pci_bus 0000:05: resource 1 [mem 0x88700000-0x889fffff]
[ 0.173639] pci_bus 0000:05: resource 2 [mem 0x88a00000-0x88bfffff 64bit pref]
[ 0.173642] pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
[ 0.173645] pci_bus 0000:08: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.173648] pci_bus 0000:08: resource 2 [mem 0x80000000-0x87ffffff pref]
[ 0.173650] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.173653] pci_bus 0000:08: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.173656] pci_bus 0000:09: resource 0 [io 0x5000-0x50ff]
[ 0.173658] pci_bus 0000:09: resource 1 [io 0x5400-0x54ff]
[ 0.173661] pci_bus 0000:09: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.173664] pci_bus 0000:09: resource 3 [mem 0x90000000-0x93ffffff]
[ 0.173666] pci_bus 0000:0d: resource 0 [io 0x5800-0x58ff]
[ 0.173669] pci_bus 0000:0d: resource 1 [io 0x5c00-0x5cff]
[ 0.173672] pci_bus 0000:0d: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.173674] pci_bus 0000:0d: resource 3 [mem 0x98000000-0x9bffffff]
[ 0.173720] NET: Registered protocol family 2
[ 0.173980] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.174000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.174033] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.174063] TCP: reno registered
[ 0.174067] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.174077] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.174146] NET: Registered protocol family 1
[ 0.174162] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.175502] PCI: CLS 64 bytes, default 64
[ 0.175560] Trying to unpack rootfs image as initramfs...
[ 0.709873] Freeing initrd memory: 21936K (f5518000 - f6a84000)
[ 0.710058] Simple Boot Flag at 0x37 set to 0x1
[ 0.710234] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[ 0.710246] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[ 0.710349] microcode: Microcode Update Driver: v2.00 <name at domain>, Peter Oruba
[ 0.710352] Scanning for low memory corruption every 60 seconds
[ 0.710692] Initialise system trusted keyring
[ 0.710751] audit: initializing netlink socket (disabled)
[ 0.710771] type=2000 audit(1445843210.708:1): initialized
[ 0.737933] bounce pool size: 64 pages
[ 0.737947] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.739667] zbud: loaded
[ 0.739771] VFS: Disk quotas dquot_6.5.2
[ 0.739830] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.740491] fuse init (API version 7.22)
[ 0.740609] msgmni has been set to 1718
[ 0.740686] Key type big_key registered
[ 0.741379] Key type asymmetric registered
[ 0.741383] Asymmetric key parser 'x509' registered
[ 0.741425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.741474] io scheduler noop registered
[ 0.741477] io scheduler deadline registered (default)
[ 0.741515] io scheduler cfq registered
[ 0.741522] io scheduler bfq registered
[ 0.741523] BFQ I/O-scheduler version: v7r5
[ 0.741844] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.741930] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.742082] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.742167] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.742317] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.742423] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.742444] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.742507] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.742509] vesafb: scrolling: redraw
[ 0.742512] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.744785] vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 3072k, total 3072k
[ 0.748767] Console: switching to colour frame buffer device 128x48
[ 0.752614] fb0: VESA VGA frame buffer device
[ 0.752645] intel_idle: does not run on family 6 model 15
[ 0.752654] ipmi message handler version 39.2
[ 0.752751] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.752832] ACPI: AC Adapter [AC] (on-line)
[ 0.752991] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.753019] ACPI: Lid Switch [LID]
[ 0.753069] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.753074] ACPI: Power Button [PWRB]
[ 0.753119] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.753122] ACPI: Power Button [PWRF]
[ 0.753238] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.753250] ACPI: acpi_idle registered with cpuidle
[ 0.753699] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.753702] ACPI: Thermal Zone [TZ00] (27 C)
[ 0.753899] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.753902] ACPI: Thermal Zone [TZ01] (27 C)
[ 0.753935] GHES: HEST is not enabled!
[ 0.754711] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.754719] ACPI: Battery Slot [CMB1] (battery present)
[ 0.754748] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.754755] ACPI: Battery Slot [CMB2] (battery absent)
[ 0.754778] isapnp: Scanning for PnP cards...
[ 0.760076] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.780729] 00:03: ttyS4 at I/O 0x220 (irq = 4, base_baud = 115200) is a 16550A
[ 0.801624] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.802954] Linux agpgart interface v0.103
[ 0.803051] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.803104] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.803937] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.804087] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.805894] brd: module loaded
[ 0.806810] loop: module loaded
[ 0.806973] ata_piix 0000:00:1f.1: version 2.13
[ 0.807717] scsi0 : ata_piix
[ 0.807790] scsi1 : ata_piix
[ 0.807836] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.807839] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.808270] libphy: Fixed MDIO Bus: probed
[ 0.808405] tun: Universal TUN/TAP device driver, 1.6
[ 0.808407] tun: (C) 1999-2004 Max Krasnyansky <name at domain>
[ 0.808469] PPP generic driver version 2.4.2
[ 0.808517] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.808522] ehci-pci: EHCI PCI platform driver
[ 0.808697] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.808705] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.808723] ehci-pci 0000:00:1d.7: debug port 1
[ 0.812624] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.812648] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0644000
[ 0.812836] ata2: port disabled--ignoring
[ 0.824034] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.824132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.824136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.824139] usb usb1: Product: EHCI Host Controller
[ 0.824142] usb usb1: Manufacturer: Linux 3.13.0-66-generic ehci_hcd
[ 0.824144] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.824270] hub 1-0:1.0: USB hub found
[ 0.824281] hub 1-0:1.0: 8 ports detected
[ 0.824548] ehci-platform: EHCI generic platform driver
[ 0.824558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.824560] ohci-pci: OHCI PCI platform driver
[ 0.824575] ohci-platform: OHCI generic platform driver
[ 0.824584] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.824733] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.824742] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.824772] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.824837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.824840] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.824843] usb usb2: Product: UHCI Host Controller
[ 0.824846] usb usb2: Manufacturer: Linux 3.13.0-66-generic uhci_hcd
[ 0.824848] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.824958] hub 2-0:1.0: USB hub found
[ 0.824968] hub 2-0:1.0: 2 ports detected
[ 0.825215] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.825221] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.825260] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[ 0.825326] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.825329] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.825332] usb usb3: Product: UHCI Host Controller
[ 0.825334] usb usb3: Manufacturer: Linux 3.13.0-66-generic uhci_hcd
[ 0.825337] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.825445] hub 3-0:1.0: USB hub found
[ 0.825455] hub 3-0:1.0: 2 ports detected
[ 0.825702] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.825709] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.825749] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.825816] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.825819] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.825822] usb usb4: Product: UHCI Host Controller
[ 0.825824] usb usb4: Manufacturer: Linux 3.13.0-66-generic uhci_hcd
[ 0.825827] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.825943] hub 4-0:1.0: USB hub found
[ 0.825953] hub 4-0:1.0: 2 ports detected
[ 0.826208] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.826214] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.826254] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.826322] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.826325] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.826328] usb usb5: Product: UHCI Host Controller
[ 0.826331] usb usb5: Manufacturer: Linux 3.13.0-66-generic uhci_hcd
[ 0.826333] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.826447] hub 5-0:1.0: USB hub found
[ 0.826456] hub 5-0:1.0: 2 ports detected
[ 0.826649] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.829176] i8042: Detected active multiplexing controller, rev 1.1
[ 0.830557] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.830563] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.830593] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.830622] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.830647] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.830762] mousedev: PS/2 mouse device common for all mice
[ 0.830938] rtc_cmos 00:05: RTC can wake from S4
[ 0.831086] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.831120] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.831209] device-mapper: uevent: version 1.0.3
[ 0.831282] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: name at domain
[ 0.831307] platform eisa.0: Probing EISA bus 0
[ 0.831315] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.831319] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.831322] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.831325] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.831328] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.831346] platform eisa.0: EISA: Detected 0 cards
[ 0.831354] cpufreq-nforce2: No nForce2 chipset.
[ 0.831358] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.831531] TCP: cubic registered
[ 0.831658] NET: Registered protocol family 10
[ 0.831913] NET: Registered protocol family 17
[ 0.831925] Key type dns_resolver registered
[ 0.832188] Using IPI No-Shortcut mode
[ 0.832279] Loading compiled-in X.509 certificates
[ 0.836648] Loaded X.509 cert 'Magrathea: Glacier signing key: 86c661045cd27694cc3453ee35b9b59c3fbd3dad'
[ 0.836664] registered taskstats version 1
[ 0.839509] Key type trusted registered
[ 0.844435] Key type encrypted registered
[ 0.844440] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.844443] IMA: No TPM chip found, activating TPM-bypass!
[ 0.844871] regulator-dummy: disabling
[ 0.844922] Magic number: 3:783:117
[ 0.845021] rtc_cmos 00:05: setting system clock to 2015-10-26 07:06:51 UTC (1445843211)
[ 0.845299] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.845301] EDD information not available.
[ 0.845350] PM: Hibernation image not present or could not be loaded.
[ 0.861089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.976399] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA4082Nj, PM03, max UDMA/33
[ 0.992279] ata1.00: configured for UDMA/33
[ 1.065743] isapnp: No Plug & Play device found
[ 1.069683] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA4082Nj PM03 PQ: 0 ANSI: 5
[ 1.074894] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.074897] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.075049] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.075180] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.075714] Freeing unused kernel memory: 880K (c19c5000 - c1aa1000)
[ 1.075789] Write protecting the kernel text: 6592k
[ 1.075931] Write protecting the kernel read-only data: 2768k
[ 1.075933] NX-protecting the kernel data: 5696k
[ 1.093723] systemd-udevd[101]: starting version 204
[ 1.126015] sdhci: Secure Digital Host Controller Interface driver
[ 1.126019] sdhci: Copyright(c) Pierre Ossman
[ 1.153409] sdhci-pci 0000:08:03.2: SDHCI controller found [1217:7120] (rev 0)
[ 1.153511] mmc0: Unknown controller version (16). You may experience problems.
[ 1.153520] sdhci-pci 0000:08:03.2: dummy supplies not allowed
[ 1.153522] mmc0: no vqmmc regulator found
[ 1.153525] sdhci-pci 0000:08:03.2: dummy supplies not allowed
[ 1.153526] mmc0: no vmmc regulator found
[ 1.153610] mmc0: SDHCI controller on PCI [0000:08:03.2] using PIO
[ 1.163432] sky2: driver version 1.30
[ 1.163559] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[ 1.163639] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.163970] sky2 0000:02:00.0 eth0: addr 00:17:42:43:67:be
[ 1.165727] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.167239] acpi device:02: registered as cooling_device2
[ 1.167313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 1.170673] [drm] Initialized drm 1.1.0 20060810
[ 1.185817] ahci 0000:00:1f.2: version 3.0
[ 1.186038] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.186128] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.186132] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.196392] scsi2 : ahci
[ 1.200128] scsi3 : ahci
[ 1.205060] scsi4 : ahci
[ 1.212187] scsi5 : ahci
[ 1.212282] ata3: SATA max UDMA/133 abar m1024@0xf0644400 port 0xf0644500 irq 44
[ 1.212285] ata4: DUMMY
[ 1.212289] ata5: SATA max UDMA/133 abar m1024@0xf0644400 port 0xf0644600 irq 44
[ 1.212291] ata6: DUMMY
[ 1.259663] [drm] Memory usable by graphics device = 256M
[ 1.259669] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 1.259672] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.259693] Console: switching to colour dummy device 80x25
[ 1.260213] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.260215] [drm] Driver supports precise vblank timestamp query.
[ 1.260295] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.351737] [drm] initialized overlay support
[ 1.532076] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.532568] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.532572] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.532847] ata3.00: ATA-8: FUJITSU MHW2100BH, 00000012, max UDMA/100
[ 1.532850] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.533432] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.533436] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.533734] ata3.00: configured for UDMA/100
[ 1.533894] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2100B 0000 PQ: 0 ANSI: 5
[ 1.534145] sd 2:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[ 1.534214] sd 2:0:0:0: [sda] Write Protect is off
[ 1.534218] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.534248] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.534523] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.552054] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.559282] fbcon: inteldrmfb (fb0) is primary device
[ 1.587900] sda: sda1 sda2 sda3 < sda5 >
[ 1.588525] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.788531] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 1.857861] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x202000/0x0, board id: 0, fw id: 181354
[ 1.895234] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 1.960825] usb 4-1: New USB device found, idVendor=0c24, idProduct=000f
[ 1.960828] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.204061] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[ 2.365813] usb 4-2: New USB device found, idVendor=08ff, idProduct=2580
[ 2.365815] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.365817] usb 4-2: Product: Fingerprint Sensor
[ 2.656812] Console: switching to colour frame buffer device 128x48
[ 2.660761] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.660764] i915 0000:00:02.0: registered panic notifier
[ 2.660774] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.759959] md: linear personality registered for level -1
[ 3.766603] md: multipath personality registered for level -4
[ 3.773326] md: raid0 personality registered for level 0
[ 3.781118] md: raid1 personality registered for level 1
[ 3.856017] raid6: mmxx1 2626 MB/s
[ 3.924024] raid6: mmxx2 3021 MB/s
[ 3.992032] raid6: sse1x1 1565 MB/s
[ 4.060034] raid6: sse1x2 2142 MB/s
[ 4.128011] raid6: sse2x1 2893 MB/s
[ 4.196023] raid6: sse2x2 3465 MB/s
[ 4.196025] raid6: using algorithm sse2x2 (3465 MB/s)
[ 4.196027] raid6: using ssse3x1 recovery algorithm
[ 4.201443] xor: measuring software checksum speed
[ 4.240008] pIII_sse : 7081.000 MB/sec
[ 4.280008] prefetch64-sse: 7990.000 MB/sec
[ 4.280010] xor: using function: prefetch64-sse (7990.000 MB/sec)
[ 4.284701] async_tx: api initialized (async)
[ 4.312368] md: raid6 personality registered for level 6
[ 4.312372] md: raid5 personality registered for level 5
[ 4.312374] md: raid4 personality registered for level 4
[ 4.324863] md: raid10 personality registered for level 10
[ 4.457816] bio: create slab at 1
[ 4.458138] Btrfs loaded
[ 4.625244] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.184689] random: nonblocking pool is initialized
[ 11.721215] Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k FS
[ 12.570716] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.753412] systemd-udevd[377]: starting version 204
[ 13.881867] lp: driver loaded but no devices found
[ 13.981439] ppdev: user-space parallel port driver
[ 15.306197] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/FUJ02B1:00/input/input13
[ 15.306305] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
[ 15.306675] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input14
[ 15.306753] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[ 15.306955] fujitsu_laptop: BTNI: [0xf0001]
[ 15.311263] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 15.338933] fujitsu_tablet: Fujitsu Lifebook T Series
[ 15.339036] input: Fujitsu FUJ02BF as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/FUJ02BF:00/input/input15
[ 15.384327] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.484571] NET: Registered protocol family 23
[ 15.497639] intel_rng: FWH not detected
[ 15.571376] found SMC SuperIO Chip (devid=0x7a rev=03 base=0x002e): LPC47N227
[ 15.571401] smsc_superio_flat(): fir: 0x6e8, sir: 0x2e8, dma: 03, irq: 6, mode: 0x0e
[ 15.571406] smsc_ircc_present: can't get sir_base of 0x2e8
[ 15.698388] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPCB.OPIO 1 (20131115/utaddress-251)
[ 15.698398] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPCB.PMIO 2 (20131115/utaddress-251)
[ 15.698403] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.698408] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPCB.OGIO 1 (20131115/utaddress-251)
[ 15.698413] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.698415] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.PCI0.LPCB.OGIO 1 (20131115/utaddress-251)
[ 15.698419] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.698422] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.773547] leds_ss4200: no LED devices found
[ 15.799306] yenta_cardbus 0000:08:03.0: CardBus bridge found [10cf:131e]
[ 15.799334] yenta_cardbus 0000:08:03.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[ 15.924890] yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0c98, PCI irq 16
[ 15.924897] yenta_cardbus 0000:08:03.0: Socket status: 30000006
[ 15.924902] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[ 15.924944] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
[ 15.924948] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff:
[ 15.967446] device-mapper: multipath: version 1.6.0 loaded
[ 16.013170] cfg80211: Calling CRDA to update world regulatory domain
[ 15.926783] excluding 0x5000-0x50ff 0x5400-0x54ff 0x5800-0x58ff 0x5c00-0x5cff
[ 16.014643] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [mem 0xf0200000-0xf02fffff]
[ 16.014649] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0200000-0xf02fffff:
[ 16.014653] excluding 0xf0200000-0xf020ffff
[ 16.014667] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x87ffffff pref]
[ 16.014670] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x87ffffff:
[ 16.014684] excluding 0x80000000-0x87ffffff
[ 16.015552] Bluetooth: Core ver 2.17
[ 16.015572] NET: Registered protocol family 31
[ 16.015574] Bluetooth: HCI device and connection manager initialized
[ 16.015583] Bluetooth: HCI socket layer initialized
[ 16.015587] Bluetooth: L2CAP socket layer initialized
[ 16.015593] Bluetooth: SCO socket layer initialized
[ 16.026236] yenta_cardbus 0000:08:03.1: enabling device (0080 -> 0083)
[ 16.026334] yenta_cardbus 0000:08:03.1: CardBus bridge found [10cf:131e]
[ 16.152788] yenta_cardbus 0000:08:03.1: ISA IRQ mask 0x0c98, PCI irq 16
[ 16.152794] yenta_cardbus 0000:08:03.1: Socket status: 30000410
[ 16.152799] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #0c to #10
[ 16.152809] yenta_cardbus 0000:08:03.1: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
[ 16.152813] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x5000-0x5fff:
[ 16.154411] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 16.154399] excluding 0x5000-0x50ff 0x5400-0x54ff 0x5800-0x58ff 0x5c00-0x5cff
[ 16.159064] yenta_cardbus 0000:08:03.1: pcmcia: parent PCI bridge window: [mem 0xf0200000-0xf02fffff]
[ 16.159068] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0200000-0xf02fffff:
[ 16.159071] excluding 0xf0200000-0xf020ffff
[ 16.159085] yenta_cardbus 0000:08:03.1: pcmcia: parent PCI bridge window: [mem 0x80000000-0x87ffffff pref]
[ 16.159088] pcmcia_socket pcmcia_socket1: cs: memory probe 0x80000000-0x87ffffff:
[ 16.159101] excluding 0x80000000-0x87ffffff
[ 16.252291] autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 16.252296] speaker_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 16.252298] hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 16.252300] mono: mono_out=0x0
[ 16.252302] inputs:
[ 16.252304] Internal Mic=0x13
[ 16.252307] Mic=0xc
[ 16.259849] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 16.259853] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.259856] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.259857] mono: mono_out=0x0
[ 16.259859] inputs:
[ 16.265889] usbcore: registered new interface driver btusb
[ 16.290129] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 16.290134] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 16.290189] iwl3945 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 16.343917] iwl3945 0000:05:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 16.343922] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 16.343997] iwl3945 0000:05:00.0: irq 46 for MSI/MSI-X
[ 16.460979] serio: Serial port ttyS4
[ 16.511105] kvm: disabled by bios
[ 16.528738] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 16.580629] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 16.580737] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 16.580822] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 16.617458] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 16.618587] excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x227 0x2e8-0x2ef 0x370-0x377
[ 16.619411] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 16.619840] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 16.620272] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 16.620935] clean.
[ 16.620954] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 16.621688] clean.
[ 16.621710] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 16.621715] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 16.621747] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 16.621768] clean.
[ 16.621786] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 16.621798] excluding 0x60000000-0x60ffffff
[ 16.621818] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 16.622576] clean.
[ 17.048058] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[ 17.048070] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0210000-0xf02fffff:
[ 17.061271] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[ 17.062400] excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x227 0x2e8-0x2ef 0x370-0x377
[ 17.064256] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
[ 17.064691] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 17.065086] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[ 17.065752] clean.
[ 17.065771] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[ 17.066506] clean.
[ 17.066528] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[ 17.066533] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 17.066564] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 17.066584] clean.
[ 17.066602] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 17.066615] excluding 0x60000000-0x60ffffff
[ 17.066635] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[ 17.067394] clean.
[ 17.075366] excluding 0xf02fe000-0xf030bfff
[ 17.076043] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 3)
[ 17.110966] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.460212] cfg80211: World regulatory domain updated:
[ 17.460217] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.460221] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.460223] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.460226] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.460229] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.460231] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.749656] type=1400 audit(1445843228.400:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=503 comm="apparmor_parser"
[ 17.749667] type=1400 audit(1445843228.400:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=503 comm="apparmor_parser"
[ 17.749674] type=1400 audit(1445843228.400:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=503 comm="apparmor_parser"
[ 17.749689] type=1400 audit(1445843228.400:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=556 comm="apparmor_parser"
[ 17.749698] type=1400 audit(1445843228.400:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=556 comm="apparmor_parser"
[ 17.749705] type=1400 audit(1445843228.400:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=556 comm="apparmor_parser"
[ 17.750282] type=1400 audit(1445843228.400:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=503 comm="apparmor_parser"
[ 17.750289] type=1400 audit(1445843228.400:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=503 comm="apparmor_parser"
[ 17.750323] type=1400 audit(1445843228.400:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=556 comm="apparmor_parser"
[ 17.750331] type=1400 audit(1445843228.400:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=556 comm="apparmor_parser"
[ 17.948118] input: Wacom Serial Penabled Touchscreen as /devices/pnp0/00:03/tty/ttyS4/serio5/input/input19
[ 18.135378] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 19.234844] init: failsafe main process (693) killed by TERM signal
[ 24.009073] audit_printk_skb: 171 callbacks suppressed
[ 24.009078] type=1400 audit(1445843234.660:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1023 comm="apparmor_parser"
[ 24.009088] type=1400 audit(1445843234.660:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1023 comm="apparmor_parser"
[ 24.009696] type=1400 audit(1445843234.660:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1023 comm="apparmor_parser"
[ 24.010647] type=1400 audit(1445843234.660:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1022 comm="apparmor_parser"

/var/log/Xorg.0.log:

[ 28.797]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 28.797] X Protocol Version 11, Revision 0
[ 28.797] Build Operating System: Linux 3.2.0-75-generic i686 Ubuntu
[ 28.797] Current Operating System: Linux PILOT 3.13.0-66-generic #108+7.0trisquel2 SMP Tue Oct 20 07:37:07 UTC 2015 i686
[ 28.797] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-66-generic root=UUID=665af512-de2d-46e6-931c-48099c6048c0 ro quiet splash nomdmonddf nomdmonisw vt.handoff=7
[ 28.797] Build Date: 12 February 2015 02:49:46PM
[ 28.797] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
[ 28.797] Current version of pixman: 0.30.2
[ 28.797] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.797] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.798] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 26 20:07:19 2015
[ 28.819] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.819] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 29.060] (==) No Layout section. Using the first Screen section.
[ 29.060] (==) No screen section available. Using defaults.
[ 29.060] (**) |-->Screen "Default Screen Section" (0)
[ 29.060] (**) | |-->Monitor ""
[ 29.079] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 29.079] (**) | |-->Device "Default"
[ 29.079] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 29.079] (==) Automatically adding devices
[ 29.079] (==) Automatically enabling devices
[ 29.079] (==) Automatically adding GPU devices
[ 29.113] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[ 29.113] Entry deleted from font path.
[ 29.113] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 29.113] Entry deleted from font path.
[ 29.113] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 29.113] Entry deleted from font path.
[ 29.113] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 29.113] Entry deleted from font path.
[ 29.153] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 29.153] Entry deleted from font path.
[ 29.153] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 29.153] Entry deleted from font path.
[ 29.153] (==) FontPath set to:
/usr/share/fonts/X11/Type1,
built-ins
[ 29.153] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 29.153] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 29.153] (II) Loader magic: 0xb76fb6c0
[ 29.153] (II) Module ABI versions:
[ 29.153] X.Org ANSI C Emulation: 0.4
[ 29.153] X.Org Video Driver: 15.0
[ 29.153] X.Org XInput driver : 20.0
[ 29.153] X.Org Server Extension : 8.0
[ 29.153] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 29.155] (--) PCI:*(0:0:2:0) 8086:27a2:10cf:1380 rev 3, Mem @ 0xf0300000/524288, 0xe0000000/268435456, 0xf0400000/262144, I/O @ 0x00001800/8
[ 29.155] (--) PCI: (0:0:2:1) 8086:27a6:10cf:1380 rev 3, Mem @ 0xf0380000/524288
[ 29.172] Initializing built-in extension Generic Event Extension
[ 29.172] Initializing built-in extension SHAPE
[ 29.172] Initializing built-in extension MIT-SHM
[ 29.172] Initializing built-in extension XInputExtension
[ 29.172] Initializing built-in extension XTEST
[ 29.172] Initializing built-in extension BIG-REQUESTS
[ 29.172] Initializing built-in extension SYNC
[ 29.172] Initializing built-in extension XKEYBOARD
[ 29.172] Initializing built-in extension XC-MISC
[ 29.172] Initializing built-in extension SECURITY
[ 29.172] Initializing built-in extension XINERAMA
[ 29.172] Initializing built-in extension XFIXES
[ 29.172] Initializing built-in extension RENDER
[ 29.172] Initializing built-in extension RANDR
[ 29.172] Initializing built-in extension COMPOSITE
[ 29.172] Initializing built-in extension DAMAGE
[ 29.172] Initializing built-in extension MIT-SCREEN-SAVER
[ 29.172] Initializing built-in extension DOUBLE-BUFFER
[ 29.172] Initializing built-in extension RECORD
[ 29.172] Initializing built-in extension DPMS
[ 29.172] Initializing built-in extension Present
[ 29.172] Initializing built-in extension DRI3
[ 29.172] Initializing built-in extension X-Resource
[ 29.172] Initializing built-in extension XVideo
[ 29.172] Initializing built-in extension XVideo-MotionCompensation
[ 29.173] Initializing built-in extension SELinux
[ 29.173] Initializing built-in extension XFree86-VidModeExtension
[ 29.173] Initializing built-in extension XFree86-DGA
[ 29.173] Initializing built-in extension XFree86-DRI
[ 29.173] Initializing built-in extension DRI2
[ 29.173] (II) LoadModule: "glx"
[ 29.210] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.424] (II) Module glx: vendor="X.Org Foundation"
[ 29.424] compiled for 1.15.1, module version = 1.0.0
[ 29.424] ABI class: X.Org Server Extension, version 8.0
[ 29.424] (==) AIGLX enabled
[ 29.424] Loading extension GLX
[ 29.425] (==) Matched intel as autoconfigured driver 0
[ 29.425] (==) Matched intel as autoconfigured driver 1
[ 29.425] (==) Matched modesetting as autoconfigured driver 2
[ 29.425] (==) Matched fbdev as autoconfigured driver 3
[ 29.425] (==) Matched vesa as autoconfigured driver 4
[ 29.425] (==) Assigned the driver to the xf86ConfigLayout
[ 29.425] (II) LoadModule: "intel"
[ 29.425] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.489] (II) Module intel: vendor="X.Org Foundation"
[ 29.490] compiled for 1.15.1, module version = 2.99.910
[ 29.490] Module class: X.Org Video Driver
[ 29.490] ABI class: X.Org Video Driver, version 15.0
[ 29.490] (II) LoadModule: "modesetting"
[ 29.490] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 29.499] (II) Module modesetting: vendor="X.Org Foundation"
[ 29.499] compiled for 1.15.0, module version = 0.8.1
[ 29.499] Module class: X.Org Video Driver
[ 29.499] ABI class: X.Org Video Driver, version 15.0
[ 29.499] (II) LoadModule: "fbdev"
[ 29.499] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 29.509] (II) Module fbdev: vendor="X.Org Foundation"
[ 29.509] compiled for 1.15.0, module version = 0.4.4
[ 29.509] Module class: X.Org Video Driver
[ 29.509] ABI class: X.Org Video Driver, version 15.0
[ 29.509] (II) LoadModule: "vesa"
[ 29.510] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 29.520] (II) Module vesa: vendor="X.Org Foundation"
[ 29.520] compiled for 1.15.0, module version = 2.3.3
[ 29.520] Module class: X.Org Video Driver
[ 29.520] ABI class: X.Org Video Driver, version 15.0
[ 29.520] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 29.537] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 29.537] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 29.537] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 29.538] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 29.538] (II) FBDEV: driver for framebuffer: fbdev
[ 29.538] (II) VESA: driver for VESA chipsets: vesa
[ 29.538] (++) using VT number 7

[ 29.543] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 (Timo Aaltonen <name at domain>)
[ 29.550] (WW) Falling back to old probe method for modesetting
[ 29.550] (WW) Falling back to old probe method for fbdev
[ 29.551] (II) Loading sub module "fbdevhw"
[ 29.551] (II) LoadModule: "fbdevhw"
[ 29.552] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 29.553] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 29.553] compiled for 1.15.1, module version = 0.0.2
[ 29.553] ABI class: X.Org Video Driver, version 15.0
[ 29.553] (WW) Falling back to old probe method for vesa
[ 29.556] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 29.556] (--) intel(0): CPU: x86, sse2, sse3, ssse3
[ 29.556] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.556] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 29.556] (==) intel(0): RGB weight 888
[ 29.556] (==) intel(0): Default visual is TrueColor
[ 29.556] (**) intel(0): Framebuffer tiled
[ 29.556] (**) intel(0): Pixmaps tiled
[ 29.556] (**) intel(0): "Tear free" disabled
[ 29.556] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 29.556] (II) intel(0): Output LVDS1 has no monitor section
[ 29.556] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 29.556] (II) intel(0): Output VGA1 has no monitor section
[ 29.556] (II) intel(0): Output DVI1 has no monitor section
[ 29.556] (II) intel(0): Output TV1 has no monitor section
[ 29.556] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 29.557] (--) intel(0): Output LVDS1 using initial mode 1024x768 on pipe 1
[ 29.557] (==) intel(0): DPI set to (96, 96)
[ 29.557] (II) Loading sub module "dri2"
[ 29.557] (II) LoadModule: "dri2"
[ 29.557] (II) Module "dri2" already built-in
[ 29.557] (II) UnloadModule: "modesetting"
[ 29.557] (II) Unloading modesetting
[ 29.557] (II) UnloadModule: "fbdev"
[ 29.557] (II) Unloading fbdev
[ 29.557] (II) UnloadSubModule: "fbdevhw"
[ 29.557] (II) Unloading fbdevhw
[ 29.557] (II) UnloadModule: "vesa"
[ 29.557] (II) Unloading vesa
[ 29.557] (==) Depth 24 pixmap format is 32 bpp
[ 29.589] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 29.589] (==) intel(0): Backing store enabled
[ 29.589] (==) intel(0): Silken mouse enabled
[ 29.591] (II) intel(0): HW Cursor enabled
[ 29.591] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.592] (==) intel(0): DPMS enabled
[ 29.605] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 29.605] (II) intel(0): [DRI2] Setup complete
[ 29.605] (II) intel(0): [DRI2] DRI driver: i915
[ 29.605] (II) intel(0): [DRI2] VDPAU driver: i915
[ 29.605] (II) intel(0): direct rendering: DRI2 Enabled
[ 29.605] (WW) intel(0): Option "GLXVBlank" is not used
[ 29.605] (==) intel(0): hotplug detection: "enabled"
[ 29.605] (--) RandR disabled
[ 29.643] (II) SELinux: Disabled on system
[ 29.677] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 29.677] (II) AIGLX: enabled GLX_ARB_create_context
[ 29.677] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 29.677] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 29.677] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 29.677] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 29.677] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 29.677] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 29.677] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 29.677] (II) AIGLX: Loaded and initialized i915
[ 29.677] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 29.685] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 29.693] (II) intel(0): Setting screen physical size to 270 x 203
[ 29.714] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 29.726] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 29.726] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.726] (II) LoadModule: "evdev"
[ 29.726] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.749] (II) Module evdev: vendor="X.Org Foundation"
[ 29.749] compiled for 1.15.0, module version = 2.8.2
[ 29.749] Module class: X.Org XInput Driver
[ 29.749] ABI class: X.Org XInput driver, version 20.0
[ 29.749] (II) Using input driver 'evdev' for 'Power Button'
[ 29.749] (**) Power Button: always reports core events
[ 29.749] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 29.749] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.749] (--) evdev: Power Button: Found keys
[ 29.749] (II) evdev: Power Button: Configuring as keyboard
[ 29.749] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 29.749] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.749] (**) Option "xkb_rules" "evdev"
[ 29.749] (**) Option "xkb_model" "pc105"
[ 29.749] (**) Option "xkb_layout" "mao"
[ 29.754] (II) XKB: reuse xkmfile /var/lib/xkb/server-7DA6C8251A7E597C332534280A6C45DB106EEFBB.xkm
[ 29.770] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event7)
[ 29.770] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 29.770] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
[ 29.770] (**) Fujitsu FUJ02E3: always reports core events
[ 29.770] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event7"
[ 29.770] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
[ 29.770] (--) evdev: Fujitsu FUJ02E3: Found keys
[ 29.770] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
[ 29.770] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input14/event7"
[ 29.770] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
[ 29.770] (**) Option "xkb_rules" "evdev"
[ 29.770] (**) Option "xkb_model" "pc105"
[ 29.770] (**) Option "xkb_layout" "mao"
[ 29.771] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 29.771] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.771] (II) Using input driver 'evdev' for 'Video Bus'
[ 29.771] (**) Video Bus: always reports core events
[ 29.771] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 29.771] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 29.771] (--) evdev: Video Bus: Found keys
[ 29.771] (II) evdev: Video Bus: Configuring as keyboard
[ 29.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event4"
[ 29.771] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 29.771] (**) Option "xkb_rules" "evdev"
[ 29.771] (**) Option "xkb_model" "pc105"
[ 29.771] (**) Option "xkb_layout" "mao"
[ 29.772] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event6)
[ 29.772] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[ 29.772] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
[ 29.772] (**) Fujitsu FUJ02B1: always reports core events
[ 29.772] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event6"
[ 29.772] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
[ 29.772] (--) evdev: Fujitsu FUJ02B1: Found keys
[ 29.772] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
[ 29.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/FUJ02B1:00/input/input13/event6"
[ 29.772] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9)
[ 29.772] (**) Option "xkb_rules" "evdev"
[ 29.772] (**) Option "xkb_model" "pc105"
[ 29.772] (**) Option "xkb_layout" "mao"
[ 29.773] (II) config/udev: Adding input device Fujitsu FUJ02BF (/dev/input/event8)
[ 29.773] (**) Fujitsu FUJ02BF: Applying InputClass "evdev keyboard catchall"
[ 29.773] (II) Using input driver 'evdev' for 'Fujitsu FUJ02BF'
[ 29.773] (**) Fujitsu FUJ02BF: always reports core events
[ 29.773] (**) evdev: Fujitsu FUJ02BF: Device: "/dev/input/event8"
[ 29.773] (--) evdev: Fujitsu FUJ02BF: Vendor 0x1734 Product 0x1
[ 29.773] (--) evdev: Fujitsu FUJ02BF: Found keys
[ 29.773] (II) evdev: Fujitsu FUJ02BF: Configuring as keyboard
[ 29.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/FUJ02BF:00/input/input15/event8"
[ 29.773] (II) XINPUT: Adding extended input device "Fujitsu FUJ02BF" (type: KEYBOARD, id 10)
[ 29.773] (**) Option "xkb_rules" "evdev"
[ 29.773] (**) Option "xkb_model" "pc105"
[ 29.773] (**) Option "xkb_layout" "mao"
[ 29.774] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 29.774] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.774] (II) Using input driver 'evdev' for 'Power Button'
[ 29.774] (**) Power Button: always reports core events
[ 29.774] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 29.774] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.774] (--) evdev: Power Button: Found keys
[ 29.774] (II) evdev: Power Button: Configuring as keyboard
[ 29.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 29.774] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 11)
[ 29.774] (**) Option "xkb_rules" "evdev"
[ 29.774] (**) Option "xkb_model" "pc105"
[ 29.774] (**) Option "xkb_layout" "mao"
[ 29.775] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 29.775] (II) No input driver specified, ignoring this device.
[ 29.775] (II) This device may have been added with another device file.
[ 29.775] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 29.775] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 29.776] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 29.776] (II) No input driver specified, ignoring this device.
[ 29.776] (II) This device may have been added with another device file.
[ 29.776] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 29.776] (II) No input driver specified, ignoring this device.
[ 29.776] (II) This device may have been added with another device file.
[ 29.778] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event9)
[ 29.778] (II) No input driver specified, ignoring this device.
[ 29.778] (II) This device may have been added with another device file.
[ 29.778] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 29.778] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.778] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 29.778] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.778] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 29.778] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 29.778] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 29.778] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 29.778] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 29.779] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 29.779] (**) Option "xkb_rules" "evdev"
[ 29.779] (**) Option "xkb_model" "pc105"
[ 29.779] (**) Option "xkb_layout" "mao"
[ 29.779] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 29.779] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 29.779] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 29.779] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 29.779] (II) LoadModule: "synaptics"
[ 29.780] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 29.789] (II) Module synaptics: vendor="X.Org Foundation"
[ 29.789] compiled for 1.15.0, module version = 1.7.4
[ 29.789] Module class: X.Org XInput Driver
[ 29.789] ABI class: X.Org XInput driver, version 20.0
[ 29.789] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 29.789] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.789] (**) Option "Device" "/dev/input/event5"
[ 29.848] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 69)
[ 29.848] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 99)
[ 29.848] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 29.848] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 29.848] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 29.848] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 29.848] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 29.848] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.884] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event5"
[ 29.884] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 29.884] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 29.884] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 29.884] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 29.884] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 29.884] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 29.884] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 29.884] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 29.884] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 29.884] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 29.884] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 29.887] (II) config/udev: Adding input device Serial Wacom Tablet (/dev/ttyS4)
[ 29.887] (**) Serial Wacom Tablet: Applying InputClass "Wacom serial class"
[ 29.887] (II) LoadModule: "wacom"
[ 29.887] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.896] (II) Module wacom: vendor="X.Org Foundation"
[ 29.896] compiled for 1.15.0, module version = 0.23.0
[ 29.896] Module class: X.Org XInput Driver
[ 29.896] ABI class: X.Org XInput driver, version 20.0
[ 29.896] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F,
TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
TabletPC 0x101, TabletPC 0x10D, TabletPC 0x4001, usb:172f:0024,
usb:172f:0025, usb:172f:0026, usb:172f:0027, usb:172f:0028,
usb:172f:0030, usb:172f:0031, usb:172f:0032, usb:172f:0033,
usb:172f:0034, usb:172f:0035, usb:172f:0036, usb:172f:0037,
usb:172f:0038, usb:172f:0039, usb:172f:0051, usb:172f:0052,
usb:172f:0053, usb:172f:0054, usb:172f:0055, usb:172f:0056,
usb:172f:0057, usb:172f:0058, usb:172f:0500, usb:172f:0501,
usb:172f:0502, usb:172f:0503, usb:1b96:0001, usb:17ef:6004
[ 29.898] (II) Using input driver 'wacom' for 'Serial Wacom Tablet'
[ 29.898] (**) Serial Wacom Tablet: always reports core events
[ 29.898] (**) Option "Device" "/dev/ttyS4"
[ 29.898] (II) Serial Wacom Tablet: type not specified, assuming 'stylus'.
[ 29.898] (II) Serial Wacom Tablet: other types will be automatically added.
[ 29.898] (EE) Serial Wacom Tablet stylus: wcmWriteWait error : Input/output error
[ 29.898] (WW) Serial Wacom Tablet stylus: Query failed with 19200 baud. Trying 38400.
[ 29.898] (EE) Serial Wacom Tablet stylus: wcmWriteWait error : Input/output error
[ 29.898] (II) Serial Wacom Tablet stylus: serial tablet id 0x90.
[ 29.898] (EE) PreInit returned 8 for "Serial Wacom Tablet stylus"
[ 29.898] (II) UnloadModule: "wacom"
[ 29.899] (II) config/udev: Adding input device Wacom Serial Penabled Touchscreen (/dev/input/event12)
[ 29.899] (**) Wacom Serial Penabled Touchscreen: Applying InputClass "evdev tablet catchall"
[ 29.899] (**) Wacom Serial Penabled Touchscreen: Applying InputClass "Wacom class"
[ 29.899] (II) Using input driver 'wacom' for 'Wacom Serial Penabled Touchscreen'
[ 29.899] (**) Wacom Serial Penabled Touchscreen: always reports core events
[ 29.899] (**) Option "Device" "/dev/input/event12"
[ 29.899] (II) Wacom Serial Penabled Touchscreen: type not specified, assuming 'stylus'.
[ 29.899] (II) Wacom Serial Penabled Touchscreen: other types will be automatically added.
[ 29.899] (--) Wacom Serial Penabled Touchscreen stylus: using pressure threshold of 27 for button 1
[ 29.899] (--) Wacom Serial Penabled Touchscreen stylus: Wacom USB TabletPC tablet maxX=24576 maxY=18432 maxZ=255 resX=100000 resY=100000 tilt=disabled
[ 29.899] (II) Wacom Serial Penabled Touchscreen stylus: hotplugging dependent devices.
[ 29.899] (EE) Wacom Serial Penabled Touchscreen stylus: Invalid type 'cursor' for this device.
[ 29.899] (EE) Wacom Serial Penabled Touchscreen stylus: Invalid type 'touch' for this device.
[ 29.899] (EE) Wacom Serial Penabled Touchscreen stylus: Invalid type 'pad' for this device.
[ 29.899] (II) Wacom Serial Penabled Touchscreen stylus: hotplugging completed.
[ 29.924] (**) Option "config_info" "udev:/sys/devices/pnp0/00:03/tty/ttyS4/serio5/input/input19/event12"
[ 29.924] (II) XINPUT: Adding extended input device "Wacom Serial Penabled Touchscreen stylus" (type: STYLUS, id 14)
[ 29.924] (**) Wacom Serial Penabled Touchscreen stylus: (accel) keeping acceleration scheme 1
[ 29.924] (**) Wacom Serial Penabled Touchscreen stylus: (accel) acceleration profile 0
[ 29.924] (**) Wacom Serial Penabled Touchscreen stylus: (accel) acceleration factor: 2.000
[ 29.924] (**) Wacom Serial Penabled Touchscreen stylus: (accel) acceleration threshold: 4
[ 29.925] (II) config/udev: Adding input device Wacom Serial Penabled Touchscreen (/dev/input/mouse1)
[ 29.925] (II) No input driver specified, ignoring this device.
[ 29.925] (II) This device may have been added with another device file.
[ 29.934] (**) Wacom Serial Penabled Touchscreen eraser: Applying InputClass "evdev tablet catchall"
[ 29.934] (**) Wacom Serial Penabled Touchscreen eraser: Applying InputClass "Wacom class"
[ 29.934] (II) Using input driver 'wacom' for 'Wacom Serial Penabled Touchscreen eraser'
[ 29.934] (**) Wacom Serial Penabled Touchscreen eraser: always reports core events
[ 29.934] (**) Option "Device" "/dev/input/event12"
[ 29.934] (**) Option "Type" "eraser"
[ 29.934] (--) Wacom Serial Penabled Touchscreen eraser: Wacom USB TabletPC tablet maxX=24576 maxY=18432 maxZ=255 resX=100000 resY=100000 tilt=disabled
[ 29.945] (**) Option "config_info" "udev:/sys/devices/pnp0/00:03/tty/ttyS4/serio5/input/input19/event12"
[ 29.946] (II) XINPUT: Adding extended input device "Wacom Serial Penabled Touchscreen eraser" (type: ERASER, id 15)
[ 29.946] (**) Wacom Serial Penabled Touchscreen eraser: (accel) keeping acceleration scheme 1
[ 29.946] (**) Wacom Serial Penabled Touchscreen eraser: (accel) acceleration profile 0
[ 29.946] (**) Wacom Serial Penabled Touchscreen eraser: (accel) acceleration factor: 2.000
[ 29.946] (**) Wacom Serial Penabled Touchscreen eraser: (accel) acceleration threshold: 4
[ 773.361] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 773.470] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 794.375] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 795.654] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[ 796.421] (II) XKB: reuse xkmfile /var/lib/xkb/server-DDE2CA3C2DD6B409234E090A701EE00432E1716A.xkm
[ 796.482] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.494] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.512] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.531] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.548] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.563] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.588] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.610] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.631] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.674] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.686] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.692] (II) XKB: reuse xkmfile /var/lib/xkb/server-DDE2CA3C2DD6B409234E090A701EE00432E1716A.xkm
[ 796.732] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.752] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.784] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.866] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.895] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.903] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.923] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.947] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 796.984] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 797.004] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm
[ 797.022] (II) XKB: reuse xkmfile /var/lib/xkb/server-F894FE6CC68ACE36FD4CC51C5ADCF1EF956B1663.xkm

Syslog and kern.log were too big to cut'n'paste. I tried to make a copy of them onto the desktop as .txt files (sudo cp /var/log/syslog /home/strypey/Desktop/syslog.txt). This made the terminal hang, but it got there in the end. When I tried to upload the .txt file, it made this page hang for ages. Any suggestions?

Have you tried the tail command suggested above?

*blush* sorry. No, I didn't fully understand what was being suggested. I do now, and I will apply it to the syslog and maybe kern.log too, and post the results here sometime in the next couple of days. Should I delete those massive logs I posted (if that's possible) and do the same with those files?

Thanks for the suggestions. I will try the hardware switch first, as it's the quickest and easiest solution anyone has come up with so far. If that doesn't fix it, I will try your solution.

>> The best solution would be to physically remove the card, of course. <<

I have no experience with opening up laptops and removing components. Is the wireless chipset on a Fujitsu Lifebook even on a modular card that can be removed?

Output of tail -f /var/log/syslog:

Oct 30 13:27:36 PILOT kernel: [ 643.633806] iwl3945 0000:05:00.0: Direct firmware load failed with error -2
Oct 30 13:27:36 PILOT kernel: [ 643.633809] iwl3945 0000:05:00.0: Falling back to user helper
Oct 30 13:27:36 PILOT kernel: [ 643.634559] iwl3945 0000:05:00.0: /*(DEBLOBBED)*/ firmware file req failed: -22
Oct 30 13:27:36 PILOT kernel: [ 643.634563] iwl3945 0000:05:00.0: Could not read microcode: -22
Oct 30 13:27:36 PILOT kernel: [ 643.635605] 0000:05:00.0: Missing Free firmware
Oct 30 13:27:36 PILOT kernel: [ 643.635618] iwl3945 0000:05:00.0: Direct firmware load failed with error -2
Oct 30 13:27:36 PILOT kernel: [ 643.635621] iwl3945 0000:05:00.0: Falling back to user helper
Oct 30 13:27:36 PILOT wpa_supplicant[1205]: Could not set interface wlan0 flags (UP): Invalid argument
Oct 30 13:27:36 PILOT wpa_supplicant[1205]: nl80211: Could not set interface 'wlan0' UP
Oct 30 13:27:36 PILOT wpa_s

Output of tail -f /var/log/kern.log:

Oct 30 13:27:36 PILOT kernel: [ 643.633795] 0000:05:00.0: Missing Free firmware
Oct 30 13:27:36 PILOT kernel: [ 643.633806] iwl3945 0000:05:00.0: Direct firmware load failed with error -2
Oct 30 13:27:36 PILOT kernel: [ 643.633809] iwl3945 0000:05:00.0: Falling back to user helper
Oct 30 13:27:36 PILOT kernel: [ 643.634559] iwl3945 0000:05:00.0: /*(DEBLOBBED)*/ firmware file req failed: -22
Oct 30 13:27:36 PILOT kernel: [ 643.634563] iwl3945 0000:05:00.0: Could not read microcode: -22
Oct 30 13:27:36 PILOT kernel: [ 643.635605] 0000:05:00.0: Missing Free firmware
Oct 30 13:27:36 PILOT kernel: [ 643.635618] iwl3945 0000:05:00.0: Direct firmware load failed with error -2
Oct 30 13:27:36 PILOT kernel: [ 643.635621] iwl3945 0000:05:00.0: Falling back to user helper
Oct 30 13:27:36 PILOT kernel: [ 643.636455] iwl3945 0000:05:00.0: /*(DEBLOBBED)*/ firmware file req failed: -22
Oct 30 13:27:36 PILOT kernel: [ 643.636459] iwl3945 0000:05:00.0: Could not read mic

It appears that the unsupported wireless card was the disease, so I've killed the pain by turning off the wireless subsystem using the hardware switch. Some suggestions on how actually cure the disease:

1) finding someone capable of writing the libre driver/ firmware required, and asking everyone with non-working hardware to put in some $ towards paying them to do so. I would happily chip in a few dollars if some of the hundreds of other GNU/Linux users with the same or similar chipsets would do the same.

Or failing that:
2) fixing the linux-libre kernel (or whatever piece of software is responsible) so that it logs the absence of the driver/firmware *once*, instead of over and over again.

Or failing that:
3) fix the logging system so that /var/log has a maximum size by default, and the system automatically deletes older logs instead of GZipping them and keeping them until they fill the available partition

Or failing that:
4) Have the graphical installer create a separate /log partition and put the logs there by default

As we now have identified [1] the problem, I'm changing the status.

1 https://trisquel.info/en/issues/15696#comment-82419

Just to confirm, it has been a few hours since I turned the wireless switch to off, and no noticeable growth in logs.

This bug has not been fixed on this device (Fujitsu LifeBook) by any of the updates to Trisquel 7 since I filed this bug. I am now using a USB network device from ThinkPenguin (TPE-N15OUSBL). For the device to work, the hardware switch for wireless networking has to be switched on. Despite keeping my Trisquel 7 install updated, the log cancer problem mentioned in this bug report is still happening whenever the hardware switch is turned on under Trisquel 7.

I was emailed some time back about debugging this log cancer issue. Finally managed to get some time, energy, and focus together to do something about it.

The person who emailed me said they'd written to a kernel guy, who said he didn't think the kernel was to blame but maybe wpa_supplicant. They asked me to remove my current /var/log/syslog and then trigger the bug. Then, after waiting a while, take a look at the new syslog to see if the kernel complaints are always immediately followed by wpa_supplicant complaints. They also asked if I could attach the log.

So I just deleted all the cancerous logs a couple of hours ago. The new syslog does indeed mention wpa_supplicant quite a bit. Log file attached.

If I can be of any further help in getting this issue diagnosed and fixed, please don't hesitate to let me know.