Libreboot installation with winsond chip

6 respostas [Última entrada]
s1lv3r
Desconectado
Joined: 10/29/2017

Hi guys i'm looking for some help with libreboot installation, i have a raspberry pi, and i have a thinkpad x200 waiting for the installation.
My chip model is a WINDSOND 25Y64VFIG, with this chip can i follow the instructions on the libreboot page? or i have to use a different pinout?
These are the instructions for the X200 on the libreboot site https://libreboot.org/docs/install/rpi_setup.html#raspberry-pi-thinkpad-x200.
In the guide they use a MX25L6405D 16 pin chip, my chip is also 16 pin.
Can i follow these instructions safely or not?
I'm not a guru in electronics but i want to try to flash libreboot my self.
You know what they say: give a man a fish and you feed him for a day; teach a man to fish and you feed him for a lifetime

s1lv3r
Desconectado
Joined: 10/29/2017

i made an error, the chip name is winbond not windsond, is similar to this chip https://tse1.mm.bing.net/th?id=OIP.Uh_VnBnNXb2UJYmqGAJT3QHaHa&pid=15.1&P=0&w=300&h=300 the only difference is that my chip has 16 pin not 8 and that instead of the number 1215 my chip has 0919

Beformed
Desconectado
Joined: 01/12/2017

Hi s1lv3r,

Sorry for the so late reply, I guess the one would give you the best answer is the minifree team name at domain, I guess they may have the answer, I really don't see the issue with the chip, but ask to make sure.

Magic Banana

I am a member!

I am a translator!

Desconectado
Joined: 07/24/2010

The forum replaces email addresses with "name at domain"...

Beformed
Desconectado
Joined: 01/12/2017

Thank you for noticing it, the email is

chaosmonk

I am a member!

I am a translator!

Desconectado
Joined: 07/07/2017

> the email is

info at gluglug.org.uk

timonovici

I am a member!

Desconectado
Joined: 12/16/2016

The pinout is the same, you can safely proceed. Raspberry Pi actually has enough power to flash the chip on it's own, without an external power supply. Also, clean the chip's legs with a bit of alcohol and a clean brush before flashing. Sometime debris and dirt interfere with the clip seating or the electrical contacts.