Live USB made with dd not booting on Korora Laptop
- Inicie sesión ou rexístrese para enviar comentarios
Live USBs made with the dd command work fine for my desktop but not the Korora I got from Think Penguin... Any ideas what the problem could be?
I am a translator!
You probably forgot to select in the BIOS to boot from USB.
Thats the thing, if I make the live USB in trisquels disk utility it works. I just am trying to figure out why dd isn't working...
I think I figured out part of the problem. The dd if=foo.iso of=/dev/bar command does not set efi by default
what iso are you using?
I had that problem. With dd I can't boot LiveUSB, it boots with Libreboot only. And if I create LiveUSB with Trisquel's USB boot tool, it won't boot with Libreboot, but boots with proprietary BIOS.
As far as I can tell the korora will not boot from a USB unless it's set up for efi.
So I guess now the question is how to use dd for efi boot...
I'm not sure you can use dd for that, but you should be able to create a single fat32 partition on your usb stick, copy the contents of the iso to the stick (either using a tool to extract the files from the iso directly to the fat32 partition, or mounting the iso and copying the files across) and using something like parted to set the partition as bootable.
You should be able to write EFI-bootable images to USB with dd. All that is
required is that the image itself is EFI-bootable (like the Debian installer
images, for example.).
I found the solution(more or less).
Using the dd command like this "dd if=/my/iso of=/dev/sdx" will not work for efi boot but "dd bs=4M if=/my/iso of=/dev/sdx && sync" does.
- Inicie sesión ou rexístrese para enviar comentarios